Re: [PATCH v4 2/2] KVM: arm/arm64: Route vtimer events to user space

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/20/2016 11:39 AM, Marc Zyngier wrote:
On 20/09/16 10:26, Alexander Graf wrote:

On 20.09.16 11:21, Marc Zyngier wrote:
On 19/09/16 18:39, Alexander Graf wrote:

On 19.09.16 16:48, Marc Zyngier wrote:
On 19/09/16 12:14, Alexander Graf wrote:
We have 2 modes for dealing with interrupts in the ARM world. We can either
handle them all using hardware acceleration through the vgic or we can emulate
a gic in user space and only drive CPU IRQ pins from there.

Unfortunately, when driving IRQs from user space, we never tell user space
about timer events that may result in interrupt line state changes, so we
lose out on timer events if we run with user space gic emulation.

This patch fixes that by routing vtimer expiration events to user space.
With this patch I can successfully run edk2 and Linux with user space gic
emulation.

Signed-off-by: Alexander Graf <agraf@xxxxxxx>

---

v1 -> v2:

   - Add back curly brace that got lost

v2 -> v3:

   - Split into patch set

v3 -> v4:

   - Improve documentation
---
  Documentation/virtual/kvm/api.txt |  30 ++++++++-
  arch/arm/include/asm/kvm_host.h   |   3 +
  arch/arm/kvm/arm.c                |  22 ++++---
  arch/arm64/include/asm/kvm_host.h |   3 +
  include/uapi/linux/kvm.h          |  14 +++++
  virt/kvm/arm/arch_timer.c         | 125 +++++++++++++++++++++++++++-----------
  6 files changed, 155 insertions(+), 42 deletions(-)

diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 23937e0..1c0bd86 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -3202,9 +3202,14 @@ struct kvm_run {
  	/* in */
  	__u8 request_interrupt_window;
-Request that KVM_RUN return when it becomes possible to inject external
+[x86] Request that KVM_RUN return when it becomes possible to inject external
  interrupts into the guest.  Useful in conjunction with KVM_INTERRUPT.
+[arm*] Bits set to 1 in here mask IRQ lines that would otherwise potentially
+trigger forever. These lines are available:
+
+    KVM_IRQWINDOW_VTIMER  -  Masks hw virtual timer irq while in guest
+
  	__u8 padding1[7];
/* out */
@@ -3519,6 +3524,18 @@ Hyper-V SynIC state change. Notification is used to remap SynIC
  event/message pages and to enable/disable SynIC messages/events processing
  in userspace.
+ /* KVM_EXIT_ARM_TIMER */
+		struct {
+			__u8 timesource;
+		} arm_timer;
+
+Indicates that a timer triggered that user space needs to handle and
+potentially mask with vcpu->run->request_interrupt_window to allow the
+guest to proceed. This only happens for timers that got enabled through
+KVM_CAP_ARM_TIMER. The following time sources are available:
+
+    KVM_ARM_TIMER_VTIMER  - virtual cpu timer
+
  		/* Fix the size of the union. */
  		char padding[256];
  	};
@@ -3739,6 +3756,17 @@ Once this is done the KVM_REG_MIPS_VEC_* and KVM_REG_MIPS_MSA_* registers can be
  accessed, and the Config5.MSAEn bit is accessible via the KVM API and also from
  the guest.
+6.11 KVM_CAP_ARM_TIMER
+
+Architectures: arm, arm64
+Target: vcpu
+Parameters: args[0] contains a bitmap of timers to select (see 5.)
+
+This capability allows to route per-core timers into user space. When it's
+enabled and no in-kernel interrupt controller is in use, the timers selected
+by args[0] trigger KVM_EXIT_ARM_TIMER guest exits when they are pending,
+unless masked by vcpu->run->request_interrupt_window (see 5.).
+
  7. Capabilities that can be enabled on VMs
  ------------------------------------------
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
index de338d9..77d1f73 100644
--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@@ -180,6 +180,9 @@ struct kvm_vcpu_arch {
/* Detect first run of a vcpu */
  	bool has_run_once;
+
+	/* User space wants timer notifications */
+	bool user_space_arm_timers;
Please move this to the timer structure.
Sure.

  };
struct kvm_vm_stat {
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index c84b6ad..57bdb71 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -187,6 +187,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
  	case KVM_CAP_ARM_PSCI_0_2:
  	case KVM_CAP_READONLY_MEM:
  	case KVM_CAP_MP_STATE:
+	case KVM_CAP_ARM_TIMER:
  		r = 1;
  		break;
  	case KVM_CAP_COALESCED_MMIO:
@@ -474,13 +475,7 @@ static int kvm_vcpu_first_run_init(struct kvm_vcpu *vcpu)
  			return ret;
  	}
- /*
-	 * Enable the arch timers only if we have an in-kernel VGIC
-	 * and it has been properly initialized, since we cannot handle
-	 * interrupts from the virtual timer with a userspace gic.
-	 */
-	if (irqchip_in_kernel(kvm) && vgic_initialized(kvm))
-		ret = kvm_timer_enable(vcpu);
+	ret = kvm_timer_enable(vcpu);
return ret;
  }
@@ -601,6 +596,13 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
  			run->exit_reason = KVM_EXIT_INTR;
  		}
+ if (kvm_check_request(KVM_REQ_PENDING_TIMER, vcpu)) {
Since this is a very unlikely event (in the grand scheme of things), how
about making this unlikely()?

+			/* Tell user space about the pending vtimer */
+			ret = 0;
+			run->exit_reason = KVM_EXIT_ARM_TIMER;
+			run->arm_timer.timesource = KVM_ARM_TIMER_VTIMER;
+		}
More importantly: why does it have to be indirected by a
make_request/check_request, and not be handled as part of the
kvm_timer_sync() call? We do update the state there, and you could
directly find out whether an exit is required.
I can try - it seemed like it could easily become quite racy because we
call kvm_timer_sync_hwstate() at multiple places.
It shouldn't. We only do it at exactly two locations (depending whether
we've entered the guest or not).

Also, take the following scenario:
(1) guest programs the timer to expire at time T
(2) guest performs an MMIO access which traps
(3) during the world switch, the timer expires and we mark the timer
interrupt as pending
(4) we exit to handle the MMIO, no sign of the timer being pending

Is the timer event lost? Or simply delayed? I think this indicates that
the timer state should always be signalled to userspace, no matter what
the exit reason is.
That's basically what I'm trying to get running right now, yes. I pushed
the interrupt pending status field into the kvm_sync_regs struct and
check it on every exit in user space - to make sure we catch pending
state changes before mmio reads.

On top of that we also need a force exit event when the state changes,
in case there's no other event pending. Furthermore we probably want to
indicate the user space status of the pending bit into the kernel to not
exit too often.
All you need is to do is to stash the line state in the run structure.

That's what I do now, yes. The sync_regs struct is basically an arch specific add-on to the run structure, so we don't modify padding / alignment with the change.

You shouldn't need any other information. And you trigger the exit on
"timer line high + timer line unmasked" in order to inject the
interrupt. Which is basically what the vgic does. It would greatly help
if you adopted a similar behaviour.

We also need to know "timer line low + timer line masked", as otherwise we might get spurious interrupts in the guest, no?

Either way, I agree that this approach in general is saner. I don't think it's easier to implement though, but we'll get to that when I send a new version :)


Alex

--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux