Re: [PATCH] powerpc: move hmi.c to arch/powerpc/kvm/

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Paolo Bonzini <pbonzini@xxxxxxxxxx> writes:

> hmi.c functions are unused unless sibling_subcore_state is nonzero, and
> that in turn happens only if KVM is in use.  So move the code to
> arch/powerpc/kvm/, putting it under CONFIG_KVM_BOOK3S_64_HANDLER
> rather than CONFIG_PPC_BOOK3S_64.  The sibling_subcore_state is also
> included in struct paca_struct only if KVM is supported by the kernel.

Ok. Initially I was concerned because there are a bunch of non-KVM
related HMI causes (e.g. the CAPP will raise an HMI if it loses the link
to the CAPI card.)
https://github.com/open-power/skiboot/blob/master/core/hmi.c lists lots
of HMIs created by hardware events.

Having said that, you're right that this particular file is KVM
specific.

Reviewed-by: Daniel Axtens <dja@xxxxxxxxxx>

Mahesh: is there a way to cause the TB to desynchronise and then test if
this resynchronisation works?

Regards,
Daniel

>
> Cc: Paul Mackerras <paulus@xxxxxxxxx>
> Cc: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
> Cc: Mahesh Salgaonkar <mahesh@xxxxxxxxxxxxxxxxxx>
> Cc: linuxppc-dev@xxxxxxxxxxxxxxxx
> Cc: kvm-ppc@xxxxxxxxxxxxxxx
> Cc: kvm@xxxxxxxxxxxxxxx
> Signed-off-by: Paolo Bonzini <pbonzini@xxxxxxxxxx>
> ---
> 	It would be nice to have this in 4.8, to minimize any 4.9 conflicts.
> 	Build-tested only, with and without KVM enabled.
>
>  arch/powerpc/include/asm/hmi.h                     |  2 +-
>  arch/powerpc/include/asm/paca.h                    | 10 +++++-----
>  arch/powerpc/kernel/Makefile                       |  2 +-
>  arch/powerpc/kvm/Makefile                          |  1 +
>  arch/powerpc/{kernel/hmi.c => kvm/book3s_hv_hmi.c} |  0
>  5 files changed, 8 insertions(+), 7 deletions(-)
>  rename arch/powerpc/{kernel/hmi.c => kvm/book3s_hv_hmi.c} (100%)
>
> diff --git a/arch/powerpc/include/asm/hmi.h b/arch/powerpc/include/asm/hmi.h
> index 88b4901ac4ee..d3b6ad6e137c 100644
> --- a/arch/powerpc/include/asm/hmi.h
> +++ b/arch/powerpc/include/asm/hmi.h
> @@ -21,7 +21,7 @@
>  #ifndef __ASM_PPC64_HMI_H__
>  #define __ASM_PPC64_HMI_H__
>  
> -#ifdef CONFIG_PPC_BOOK3S_64
> +#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
>  
>  #define	CORE_TB_RESYNC_REQ_BIT		63
>  #define MAX_SUBCORE_PER_CORE		4
> diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
> index 148303e7771f..625321e7e581 100644
> --- a/arch/powerpc/include/asm/paca.h
> +++ b/arch/powerpc/include/asm/paca.h
> @@ -183,11 +183,6 @@ struct paca_struct {
>  	 */
>  	u16 in_mce;
>  	u8 hmi_event_available;		 /* HMI event is available */
> -	/*
> -	 * Bitmap for sibling subcore status. See kvm/book3s_hv_ras.c for
> -	 * more details
> -	 */
> -	struct sibling_subcore_state *sibling_subcore_state;
>  #endif
>  
>  	/* Stuff for accurate time accounting */
> @@ -202,6 +197,11 @@ struct paca_struct {
>  	struct kvmppc_book3s_shadow_vcpu shadow_vcpu;
>  #endif
>  	struct kvmppc_host_state kvm_hstate;
> +	/*
> +	 * Bitmap for sibling subcore status. See kvm/book3s_hv_ras.c for
> +	 * more details
> +	 */
> +	struct sibling_subcore_state *sibling_subcore_state;
>  #endif
>  };
>  
> diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
> index b2027a5cf508..fe4c075bcf50 100644
> --- a/arch/powerpc/kernel/Makefile
> +++ b/arch/powerpc/kernel/Makefile
> @@ -41,7 +41,7 @@ obj-$(CONFIG_VDSO32)		+= vdso32/
>  obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
>  obj-$(CONFIG_PPC_BOOK3S_64)	+= cpu_setup_ppc970.o cpu_setup_pa6t.o
>  obj-$(CONFIG_PPC_BOOK3S_64)	+= cpu_setup_power.o
> -obj-$(CONFIG_PPC_BOOK3S_64)	+= mce.o mce_power.o hmi.o
> +obj-$(CONFIG_PPC_BOOK3S_64)	+= mce.o mce_power.o
>  obj-$(CONFIG_PPC_BOOK3E_64)	+= exceptions-64e.o idle_book3e.o
>  obj-$(CONFIG_PPC64)		+= vdso64/
>  obj-$(CONFIG_ALTIVEC)		+= vecemu.o
> diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
> index 1f9e5529e692..855d4b95d752 100644
> --- a/arch/powerpc/kvm/Makefile
> +++ b/arch/powerpc/kvm/Makefile
> @@ -78,6 +78,7 @@ kvm-book3s_64-builtin-xics-objs-$(CONFIG_KVM_XICS) := \
>  
>  ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
>  kvm-book3s_64-builtin-objs-$(CONFIG_KVM_BOOK3S_64_HANDLER) += \
> +	book3s_hv_hmi.o \
>  	book3s_hv_rmhandlers.o \
>  	book3s_hv_rm_mmu.o \
>  	book3s_hv_ras.o \
> diff --git a/arch/powerpc/kernel/hmi.c b/arch/powerpc/kvm/book3s_hv_hmi.c
> similarity index 100%
> rename from arch/powerpc/kernel/hmi.c
> rename to arch/powerpc/kvm/book3s_hv_hmi.c
> -- 
> 1.8.3.1
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@xxxxxxxxxxxxxxxx
> https://lists.ozlabs.org/listinfo/linuxppc-dev

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux