On Tue, Jul 19, 2016 at 02:53:06PM +0200, Alexander Gordeev wrote:
> Unlike x86, other architectures using generic ECAM PCI host
> do not have a luxury of PCI bus initialized by a BIOS and
> ready to use at start. Thus, we need allocate and assign
> resources to all devices, much like an architecture's
> firmware would do.
>
> There is no any sort of resource management for memory and
> io spaces, since only ones-per-BAR allocations are expected
> and no deallocations at all.
>
> Cc: Thomas Huth <thuth@xxxxxxxxxx>
> Cc: Andrew Jones <drjones@xxxxxxxxxx>
> Reviewed-by: Andrew Jones <drjones@xxxxxxxxxx>
> Signed-off-by: Alexander Gordeev <agordeev@xxxxxxxxxx>
> ---
> lib/asm-generic/pci-host-bridge.h | 26 ++++
> lib/pci-host-generic.c | 295 ++++++++++++++++++++++++++++++++++++++
> lib/pci-host-generic.h | 46 ++++++
> lib/pci.c | 4 +-
> lib/pci.h | 3 +
> 5 files changed, 372 insertions(+), 2 deletions(-)
> create mode 100644 lib/asm-generic/pci-host-bridge.h
> create mode 100644 lib/pci-host-generic.c
> create mode 100644 lib/pci-host-generic.h
>
> diff --git a/lib/asm-generic/pci-host-bridge.h b/lib/asm-generic/pci-host-bridge.h
> new file mode 100644
> index 000000000000..872df3a81310
> --- /dev/null
> +++ b/lib/asm-generic/pci-host-bridge.h
> @@ -0,0 +1,26 @@
> +#ifndef _ASM_PCI_HOST_BRIDGE_H_
> +#define _ASM_PCI_HOST_BRIDGE_H_
> +/*
> + * Copyright (C) 2016, Red Hat Inc, Alexander Gordeev <agordeev@xxxxxxxxxx>
> + *
> + * This work is licensed under the terms of the GNU LGPL, version 2.
> + */
> +#include "libcflat.h"
> +
> +phys_addr_t pci_host_bridge_get_paddr(uint64_t addr);
> +
> +static inline
> +phys_addr_t pci_translate_addr(pcidevaddr_t __unused dev, uint64_t addr)
> +{
> + /*
> + * Assume we only have single PCI host bridge in a system.
> + */
> + return pci_host_bridge_get_paddr(addr);
> +}
> +
> +uint8_t pci_config_readb(pcidevaddr_t dev, uint8_t reg);
> +uint16_t pci_config_readw(pcidevaddr_t dev, uint8_t reg);
> +uint32_t pci_config_readl(pcidevaddr_t dev, uint8_t reg);
> +void pci_config_writel(pcidevaddr_t dev, uint8_t reg, uint32_t val);
> +
> +#endif
> diff --git a/lib/pci-host-generic.c b/lib/pci-host-generic.c
> new file mode 100644
> index 000000000000..4a2716a33150
> --- /dev/null
> +++ b/lib/pci-host-generic.c
> @@ -0,0 +1,295 @@
> +/*
> + * Generic PCI host controller as described in PCI Bus Binding to Open Firmware
> + *
> + * Copyright (C) 2016, Red Hat Inc, Alexander Gordeev <agordeev@xxxxxxxxxx>
> + *
> + * This work is licensed under the terms of the GNU LGPL, version 2.
> + */
> +#include "libcflat.h"
> +#include "devicetree.h"
> +#include "alloc.h"
> +#include "pci.h"
> +#include "asm/pci.h"
> +#include "asm/io.h"
> +#include "pci-host-generic.h"
> +#include <linux/pci_regs.h>
> +
> +static struct pci_host_bridge *pci_host_bridge;
> +
> +static int of_flags_to_pci_type(u32 of_flags)
> +{
> + static int type_map[] = {
> + [1] = PCI_BASE_ADDRESS_SPACE_IO,
> + [2] = PCI_BASE_ADDRESS_MEM_TYPE_32,
> + [3] = PCI_BASE_ADDRESS_MEM_TYPE_64
> + };
> + int idx = (of_flags >> 24) & 0x03;
> + int res;
> +
> + assert(idx > 0);
> + res = type_map[idx];
> +
> + if (of_flags & 0x40000000)
> + res |= PCI_BASE_ADDRESS_MEM_PREFETCH;
> +
> + return res;
> +}
> +
> +static int pci_bar_type(u32 bar)
> +{
> + if (bar & PCI_BASE_ADDRESS_SPACE)
> + return PCI_BASE_ADDRESS_SPACE_IO;
> + else
> + return bar & (PCI_BASE_ADDRESS_MEM_TYPE_MASK |
> + PCI_BASE_ADDRESS_MEM_PREFETCH);
> +}
> +
> +/*
> + * Probe DT for a generic PCI host controller
> + * See kernel Documentation/devicetree/bindings/pci/host-generic-pci.txt
> + * and function gen_pci_probe() in drivers/pci/host/pci-host-generic.c
> + */
> +static struct pci_host_bridge *pci_dt_probe(void)
> +{
> + struct pci_host_bridge *host;
> + const void *fdt = dt_fdt();
> + const struct fdt_property *prop;
> + struct dt_pbus_reg base;
> + struct dt_device dt_dev;
> + struct dt_bus dt_bus;
> + struct pci_addr_space *as;
> + fdt32_t *data;
> + u32 bus, bus_max;
> + u32 nac, nsc, nac_root, nsc_root;
> + int nr_range_cells, nr_addr_spaces;
> + int ret, node, len, i;
> +
> + if (!dt_available()) {
> + printf("No device tree found\n");
> + return NULL;
> + }
> +
> + dt_bus_init_defaults(&dt_bus);
> + dt_device_init(&dt_dev, &dt_bus, NULL);
> +
> + node = fdt_path_offset(fdt, "/");
> + assert(node >= 0);
> +
> + ret = dt_get_nr_cells(node, &nac_root, &nsc_root);
> + assert(ret == 0);
> + assert(nac_root == 1 || nac_root == 2);
> +
> + node = fdt_node_offset_by_compatible(fdt, node,
> + "pci-host-ecam-generic");
> + if (node == -FDT_ERR_NOTFOUND) {
> + printf("No PCIe ECAM compatible controller found\n");
> + return NULL;
> + }
> + assert(node >= 0);
> +
> + prop = fdt_get_property(fdt, node, "device_type", &len);
> + assert(prop && len == 4 && !strcmp((char *)prop->data, "pci"));
> +
> + dt_device_bind_node(&dt_dev, node);
> + ret = dt_pbus_get_base(&dt_dev, &base);
> + assert(ret == 0);
> +
> + prop = fdt_get_property(fdt, node, "bus-range", &len);
> + if (prop == NULL) {
> + assert(len == -FDT_ERR_NOTFOUND);
> + bus = 0x00;
> + bus_max = 0xff;
> + } else {
> + data = (fdt32_t *)prop->data;
> + bus = fdt32_to_cpu(data[0]);
> + bus_max = fdt32_to_cpu(data[1]);
> + assert(bus <= bus_max);
> + }
> + assert(bus_max < base.size / (1 << PCI_ECAM_BUS_SHIFT));
I see you kept the inequality, rather than my suggestion to change it to
assert(bus_max + 1 == base.size / (1 << PCI_ECAM_BUS_SHIFT)) Any reason
why?
I'm not too worried about it though...
> +
> + ret = dt_get_nr_cells(node, &nac, &nsc);
> + assert(ret == 0);
> + assert(nac == 3 && nsc == 2);
> +
> + prop = fdt_get_property(fdt, node, "ranges", &len);
> + assert(prop != NULL);
> +
> + nr_range_cells = nac + nsc + nac_root;
> + nr_addr_spaces = (len / 4) / nr_range_cells;
> + assert(nr_addr_spaces);
> +
> + host = malloc(sizeof(*host) +
> + sizeof(host->addr_space[0]) * nr_addr_spaces);
> + assert(host != NULL);
> +
> + host->start = base.addr;
> + host->size = base.size;
> + host->bus = bus;
> + host->bus_max = bus_max;
> + host->nr_addr_spaces = nr_addr_spaces;
> +
> + data = (fdt32_t *)prop->data;
> + as = &host->addr_space[0];
> +
> + for (i = 0; i < nr_addr_spaces; i++) {
> + /*
> + * The PCI binding encodes the PCI address with three
> + * cells as follows:
> + *
> + * phys.hi cell: npt000ss bbbbbbbb dddddfff rrrrrrrr
> + * phys.mid cell: hhhhhhhh hhhhhhhh hhhhhhhh hhhhhhhh
> + * phys.lo cell: llllllll llllllll llllllll llllllll
> + *
> + * PCI device bus address and flags are encoded into phys.high
> + * PCI 64 bit address is encoded into phys.mid and phys.low
> + */
> + as->type = of_flags_to_pci_type(fdt32_to_cpu(data[0]));
> + as->pci_start = ((u64)fdt32_to_cpu(data[1]) << 32) |
> + fdt32_to_cpu(data[2]);
> +
> + if (nr_range_cells == 6) {
> + as->start = fdt32_to_cpu(data[3]);
> + as->size = ((u64)fdt32_to_cpu(data[4]) << 32) |
> + fdt32_to_cpu(data[5]);
> + } else {
> + as->start = ((u64)fdt32_to_cpu(data[3]) << 32) |
> + fdt32_to_cpu(data[4]);
> + as->size = ((u64)fdt32_to_cpu(data[5]) << 32) |
> + fdt32_to_cpu(data[6]);
> + }
> +
> + data += nr_range_cells;
> + as++;
> + }
> +
> + return host;
> +}
> +
> +static u64 pci_alloc_resource(u32 bar, u64 size)
> +{
> + struct pci_host_bridge *host = pci_host_bridge;
> + struct pci_addr_space *as = &host->addr_space[0];
> + phys_addr_t addr;
> + u32 mask;
> + int i;
> +
> + for (i = 0; i < host->nr_addr_spaces; i++) {
> + if (as->type == pci_bar_type(bar))
> + break;
> + as++;
> + }
> + if (i >= host->nr_addr_spaces) {
> + printf("No PCI resource found for a device\n");
> + assert(0);
> + }
> +
> + mask = pci_bar_mask(bar);
> + size = ALIGN(size, ~mask + 1);
> + assert(as->allocated + size <= as->size);
> +
> + addr = as->pci_start + as->allocated;
> + as->allocated += size;
> +
> + return addr;
> +}
> +
> +bool pci_probe(void)
> +{
> + pcidevaddr_t dev;
> + u8 header;
> + u32 cmd;
> + int i;
> +
> + assert(!pci_host_bridge);
> + pci_host_bridge = pci_dt_probe();
> + if (!pci_host_bridge)
> + return false;
> +
> + for (dev = 0; dev < 256; dev++) {
> + if (!pci_dev_exists(dev))
> + continue;
> +
> + /* We are only interested in normal PCI devices */
> + header = pci_config_readb(dev, PCI_HEADER_TYPE);
> + if ((header & PCI_HEADER_TYPE_MASK) != PCI_HEADER_TYPE_NORMAL)
> + continue;
> +
> + cmd = PCI_COMMAND_SERR;
> +
> + for (i = 0; i < 6; i++) {
> + u64 addr, size;
> + u32 bar;
> +
> + size = pci_bar_size(dev, i);
> + if (!size)
> + continue;
> +
> + bar = pci_bar_get(dev, i);
> + addr = pci_alloc_resource(bar, size);
> + pci_bar_set_addr(dev, i, addr);
> +
> + if (pci_bar_is_memory(dev, i))
> + cmd |= PCI_COMMAND_MEMORY;
> + else
> + cmd |= PCI_COMMAND_IO;
> +
> + if (pci_bar_is64(dev, i))
> + i++;
> + }
> +
> + pci_config_writel(dev, PCI_COMMAND, cmd);
> + }
> +
> + return true;
> +}
> +
> +/*
> + * This function is to be called from pci_translate_addr() to provide
> + * mapping between this host bridge's PCI busses address and CPU physical
> + * address.
> + */
> +phys_addr_t pci_host_bridge_get_paddr(u64 pci_addr)
> +{
> + struct pci_host_bridge *host = pci_host_bridge;
> + struct pci_addr_space *as = &host->addr_space[0];
> + int i;
> +
> + for (i = 0; i < host->nr_addr_spaces; i++) {
> + if (pci_addr >= as->pci_start &&
> + pci_addr < as->pci_start + as->size)
> + return as->start + (pci_addr - as->pci_start);
> + as++;
> + }
> +
> + return 0;
> +}
> +
> +static void __iomem *pci_get_dev_conf(struct pci_host_bridge *host, int devfn)
> +{
> + return (void __iomem *)(unsigned long)
> + host->start + (devfn << PCI_ECAM_DEVFN_SHIFT);
> +}
> +
> +u8 pci_config_readb(pcidevaddr_t dev, u8 off)
> +{
> + void __iomem *conf = pci_get_dev_conf(pci_host_bridge, dev);
> + return readb(conf + off);
> +}
> +
> +u16 pci_config_readw(pcidevaddr_t dev, u8 off)
> +{
> + void __iomem *conf = pci_get_dev_conf(pci_host_bridge, dev);
> + return readw(conf + off);
> +}
> +
> +u32 pci_config_readl(pcidevaddr_t dev, u8 off)
> +{
> + void __iomem *conf = pci_get_dev_conf(pci_host_bridge, dev);
> + return readl(conf + off);
> +}
> +
> +void pci_config_writel(pcidevaddr_t dev, u8 off, u32 val)
> +{
> + void __iomem *conf = pci_get_dev_conf(pci_host_bridge, dev);
> + writel(val, conf + off);
> +}
> diff --git a/lib/pci-host-generic.h b/lib/pci-host-generic.h
> new file mode 100644
> index 000000000000..fd30e7c74ed8
> --- /dev/null
> +++ b/lib/pci-host-generic.h
> @@ -0,0 +1,46 @@
> +#ifndef PCI_HOST_GENERIC_H
> +#define PCI_HOST_GENERIC_H
> +/*
> + * PCI host bridge supporting structures and constants
> + *
> + * Copyright (C) 2016, Red Hat Inc, Alexander Gordeev <agordeev@xxxxxxxxxx>
> + *
> + * This work is licensed under the terms of the GNU LGPL, version 2.
> + */
> +#include "libcflat.h"
> +
> +struct pci_addr_space {
> + phys_addr_t pci_start;
> + phys_addr_t start;
> + phys_addr_t size;
> + phys_addr_t allocated;
> + int type;
> +};
> +
> +struct pci_host_bridge {
> + phys_addr_t start;
> + phys_addr_t size;
> + int bus;
> + int bus_max;
> + int nr_addr_spaces;
> + struct pci_addr_space addr_space[];
> +};
> +
> +/*
> + * The following constants are derived from Linux, see this source:
> + *
> + * drivers/pci/host/pci-host-generic.c
> + * struct gen_pci_cfg_bus_ops::bus_shift
> + * int gen_pci_parse_map_cfg_windows(struct gen_pci *pci)
> + *
> + * Documentation/devicetree/bindings/pci/host-generic-pci.txt describes
> + * ECAM Configuration Space is be memory-mapped by concatenating the various
> + * components to form an offset:
> + *
> + * cfg_offset(bus, device, function, register) =
> + * bus << 20 | device << 15 | function << 12 | register
> + */
> +#define PCI_ECAM_BUS_SHIFT 20
> +#define PCI_ECAM_DEVFN_SHIFT 12
> +
> +#endif
> diff --git a/lib/pci.c b/lib/pci.c
> index f01a085391f3..46cd39dc9c7e 100644
> --- a/lib/pci.c
> +++ b/lib/pci.c
> @@ -27,13 +27,13 @@ pcidevaddr_t pci_find_dev(uint16_t vendor_id, uint16_t device_id)
> return PCIDEVADDR_INVALID;
> }
>
> -static uint32_t pci_bar_mask(uint32_t bar)
> +uint32_t pci_bar_mask(uint32_t bar)
> {
> return (bar & PCI_BASE_ADDRESS_SPACE_IO) ?
> PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK;
> }
>
> -static uint32_t pci_bar_get(pcidevaddr_t dev, int bar_num)
> +uint32_t pci_bar_get(pcidevaddr_t dev, int bar_num)
> {
> return pci_config_readl(dev, PCI_BASE_ADDRESS_0 + bar_num * 4);
> }
> diff --git a/lib/pci.h b/lib/pci.h
> index ff32ea683c94..e00e1471d80a 100644
> --- a/lib/pci.h
> +++ b/lib/pci.h
> @@ -15,6 +15,7 @@ enum {
> PCIDEVADDR_INVALID = 0xffff,
> };
>
> +bool pci_probe(void);
> void pci_print(void);
> bool pci_dev_exists(pcidevaddr_t dev);
> pcidevaddr_t pci_find_dev(uint16_t vendor_id, uint16_t device_id);
> @@ -33,6 +34,8 @@ pcidevaddr_t pci_find_dev(uint16_t vendor_id, uint16_t device_id);
> phys_addr_t pci_bar_get_addr(pcidevaddr_t dev, int bar_num);
> void pci_bar_set_addr(pcidevaddr_t dev, int bar_num, phys_addr_t addr);
> phys_addr_t pci_bar_size(pcidevaddr_t dev, int bar_num);
> +uint32_t pci_bar_get(pcidevaddr_t dev, int bar_num);
> +uint32_t pci_bar_mask(uint32_t bar);
> bool pci_bar_is64(pcidevaddr_t dev, int bar_num);
> bool pci_bar_is_memory(pcidevaddr_t dev, int bar_num);
> bool pci_bar_is_valid(pcidevaddr_t dev, int bar_num);
> --
> 1.8.3.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
