[PATCH RFC QEMU] balloon: speed up inflating & deflating process

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The implementation of the current virtio-balloon is not very efficient,
Bellow is test result of time spends on inflating the balloon to 3GB of
a 4GB idle guest:

a. allocating pages (6.5%, 103ms)
b. sending PFNs to host (68.3%, 787ms)
c. address translation (6.1%, 96ms)
d. madvise (19%, 300ms)

It takes about 1577ms for the whole inflating process to complete. The
test shows that the bottle neck is the stage b and stage d.

If using a bitmap to send the page info instead of the PFNs, we can
reduce the overhead spends on stage b quite a lot. Furthermore, it's
possible to do the address translation and do the madvise with a bulk
of pages, instead of the current page per page way, so the overhead of
stage c and stage d can also be reduced a lot.

This patch is the QEMU side implementation which is intended to speed
up the inflating & deflating process by adding a new feature to the
virtio-balloon device. And now, inflating the balloon to 3GB of a 4GB
idle guest only takes 175ms, it's about 9 times as fast as before.

TODO: optimize stage a by allocating/freeing a chunk of pages instead
of a single page at a time.

Signed-off-by: Liang Li <liang.z.li@xxxxxxxxx>
---
 hw/virtio/virtio-balloon.c                      | 159 ++++++++++++++++++++----
 include/standard-headers/linux/virtio_balloon.h |   1 +
 2 files changed, 139 insertions(+), 21 deletions(-)

diff --git a/hw/virtio/virtio-balloon.c b/hw/virtio/virtio-balloon.c
index 9dbe681..ce67465 100644
--- a/hw/virtio/virtio-balloon.c
+++ b/hw/virtio/virtio-balloon.c
@@ -47,6 +47,76 @@ static void balloon_page(void *addr, int deflate)
 #endif
 }
 
+static void do_balloon_bulk_pages(ram_addr_t base_pfn, int page_shift,
+                                  unsigned long len, bool deflate)
+{
+    ram_addr_t size, processed, chunk, base;
+    void *addr;
+    MemoryRegionSection section = {.mr = NULL};
+
+    size = (len << page_shift);
+    base = (base_pfn << page_shift);
+
+    for (processed = 0; processed < size; processed += chunk) {
+        chunk = size - processed;
+        while (chunk >= TARGET_PAGE_SIZE) {
+            section = memory_region_find(get_system_memory(),
+                                         base + processed, chunk);
+            if (!section.mr) {
+                chunk = QEMU_ALIGN_DOWN(chunk / 2, TARGET_PAGE_SIZE);
+            } else {
+                break;
+            }
+        }
+
+        if (section.mr &&
+            (int128_nz(section.size) && memory_region_is_ram(section.mr))) {
+            addr = section.offset_within_region +
+                   memory_region_get_ram_ptr(section.mr);
+            qemu_madvise(addr, chunk,
+               deflate ? QEMU_MADV_WILLNEED : QEMU_MADV_DONTNEED);
+        } else {
+            fprintf(stderr, "can't find the chunk, skip\n");
+            chunk = TARGET_PAGE_SIZE;
+        }
+    }
+}
+
+static void balloon_bulk_pages(ram_addr_t base_pfn, unsigned long *bitmap,
+                               unsigned long len, int page_shift, bool deflate)
+{
+#if defined(__linux__)
+    unsigned long end  = len * 8;
+    unsigned long current = 0;
+
+    if (!qemu_balloon_is_inhibited() && (!kvm_enabled() ||
+                                         kvm_has_sync_mmu())) {
+        while (current < end) {
+            unsigned long one = find_next_bit(bitmap, end, current);
+
+            if (one < end) {
+                unsigned long zero = find_next_zero_bit(bitmap, end, one + 1);
+                unsigned long page_length;
+
+                if (zero >= end) {
+                    page_length = end - one;
+                } else {
+                    page_length = zero - one;
+                }
+
+                if (page_length) {
+                    do_balloon_bulk_pages(base_pfn + one, page_shift,
+                                          page_length, deflate);
+                }
+                current = one + page_length;
+            } else {
+                current = one;
+            }
+        }
+    }
+#endif
+}
+
 static const char *balloon_stat_names[] = {
    [VIRTIO_BALLOON_S_SWAP_IN] = "stat-swap-in",
    [VIRTIO_BALLOON_S_SWAP_OUT] = "stat-swap-out",
@@ -78,6 +148,12 @@ static bool balloon_stats_supported(const VirtIOBalloon *s)
     return virtio_vdev_has_feature(vdev, VIRTIO_BALLOON_F_STATS_VQ);
 }
 
+static bool balloon_page_bitmap_supported(const VirtIOBalloon *s)
+{
+    VirtIODevice *vdev = VIRTIO_DEVICE(s);
+    return virtio_vdev_has_feature(vdev, VIRTIO_BALLOON_F_PAGE_BITMAP);
+}
+
 static bool balloon_stats_enabled(const VirtIOBalloon *s)
 {
     return s->stats_poll_interval > 0;
@@ -223,27 +299,66 @@ static void virtio_balloon_handle_output(VirtIODevice *vdev, VirtQueue *vq)
             return;
         }
 
-        while (iov_to_buf(elem->out_sg, elem->out_num, offset, &pfn, 4) == 4) {
-            ram_addr_t pa;
-            ram_addr_t addr;
-            int p = virtio_ldl_p(vdev, &pfn);
-
-            pa = (ram_addr_t) p << VIRTIO_BALLOON_PFN_SHIFT;
-            offset += 4;
-
-            /* FIXME: remove get_system_memory(), but how? */
-            section = memory_region_find(get_system_memory(), pa, 1);
-            if (!int128_nz(section.size) || !memory_region_is_ram(section.mr))
-                continue;
-
-            trace_virtio_balloon_handle_output(memory_region_name(section.mr),
-                                               pa);
-            /* Using memory_region_get_ram_ptr is bending the rules a bit, but
-               should be OK because we only want a single page.  */
-            addr = section.offset_within_region;
-            balloon_page(memory_region_get_ram_ptr(section.mr) + addr,
-                         !!(vq == s->dvq));
-            memory_region_unref(section.mr);
+        if (balloon_page_bitmap_supported(s)) {
+            uint64_t base, flags, tmp64, bmap_len;
+            uint32_t tmp32, page_shift;
+            unsigned long *bitmap;
+
+            iov_to_buf(elem->out_sg, elem->out_num, offset,
+                       &tmp64, sizeof(uint64_t));
+            flags = virtio_ldq_p(vdev, &tmp64);
+            offset += sizeof(uint64_t);
+            /* to suppress build warning*/
+            flags = flags;
+
+            iov_to_buf(elem->out_sg, elem->out_num, offset,
+                       &tmp64, sizeof(uint64_t));
+            base = virtio_ldq_p(vdev, &tmp64);
+            offset += sizeof(uint64_t);
+
+            iov_to_buf(elem->out_sg, elem->out_num, offset,
+                       &tmp32, sizeof(uint32_t));
+            page_shift = virtio_ldl_p(vdev, &tmp32);
+            offset += sizeof(uint32_t);
+
+            iov_to_buf(elem->out_sg, elem->out_num, offset,
+                       &tmp64, sizeof(uint64_t));
+            bmap_len = virtio_ldq_p(vdev, &tmp64);
+            offset += sizeof(uint64_t);
+
+            bitmap = bitmap_new(bmap_len * 8);
+            iov_to_buf(elem->out_sg, elem->out_num, offset,
+                       bitmap, bmap_len);
+            offset += bmap_len;
+
+            balloon_bulk_pages(base, bitmap, bmap_len,
+                               page_shift, !!(vq == s->dvq));
+            g_free(bitmap);
+        } else {
+            while (iov_to_buf(elem->out_sg, elem->out_num, offset,
+                              &pfn, 4) == 4) {
+                ram_addr_t pa;
+                ram_addr_t addr;
+                int p = virtio_ldl_p(vdev, &pfn);
+
+                pa = (ram_addr_t) p << VIRTIO_BALLOON_PFN_SHIFT;
+                offset += 4;
+
+                /* FIXME: remove get_system_memory(), but how? */
+                section = memory_region_find(get_system_memory(), pa, 1);
+                if (!int128_nz(section.size) ||
+                    !memory_region_is_ram(section.mr))
+                    continue;
+
+                trace_virtio_balloon_handle_output(memory_region_name(
+                                                            section.mr), pa);
+                /* Using memory_region_get_ram_ptr is bending the rules a bit,
+                 * but should be OK because we only want a single page.  */
+                addr = section.offset_within_region;
+                balloon_page(memory_region_get_ram_ptr(section.mr) + addr,
+                             !!(vq == s->dvq));
+                memory_region_unref(section.mr);
+            }
         }
 
         virtqueue_push(vq, elem, offset);
@@ -373,6 +488,7 @@ static uint64_t virtio_balloon_get_features(VirtIODevice *vdev, uint64_t f,
     VirtIOBalloon *dev = VIRTIO_BALLOON(vdev);
     f |= dev->host_features;
     virtio_add_feature(&f, VIRTIO_BALLOON_F_STATS_VQ);
+    virtio_add_feature(&f, VIRTIO_BALLOON_F_PAGE_BITMAP);
     return f;
 }
 
@@ -387,6 +503,7 @@ static void virtio_balloon_to_target(void *opaque, ram_addr_t target)
 {
     VirtIOBalloon *dev = VIRTIO_BALLOON(opaque);
     VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+
     ram_addr_t vm_ram_size = get_current_ram_size();
 
     if (target > vm_ram_size) {
diff --git a/include/standard-headers/linux/virtio_balloon.h b/include/standard-headers/linux/virtio_balloon.h
index 9d06ccd..1da9391 100644
--- a/include/standard-headers/linux/virtio_balloon.h
+++ b/include/standard-headers/linux/virtio_balloon.h
@@ -34,6 +34,7 @@
 #define VIRTIO_BALLOON_F_MUST_TELL_HOST	0 /* Tell before reclaiming pages */
 #define VIRTIO_BALLOON_F_STATS_VQ	1 /* Memory Stats virtqueue */
 #define VIRTIO_BALLOON_F_DEFLATE_ON_OOM	2 /* Deflate balloon on OOM */
+#define VIRTIO_BALLOON_F_PAGE_BITMAP  3 /* Use page bitmap to send page info*/
 
 /* Size of a PFN in the balloon interface. */
 #define VIRTIO_BALLOON_PFN_SHIFT 12
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux