Re: [PATCH v3 51/55] KVM: arm/arm64: vgic-new: vgic_init: implement map_resources

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 06, 2016 at 11:46:04AM +0100, Andre Przywara wrote:
> From: Eric Auger <eric.auger@xxxxxxxxxx>
> 
> map_resources is the last initialization step. It is executed on
> 1st VCPU run. At that stage the code checks the userspace has provided
> the base addresses for the relevant VGIC regions, which depend on
> the type of VGIC that is exposed to the guest.
> 
> The function also forces the vgic_init if it has not been executed yet
> (only allowed for VGIC v2).
> 
> for GICv2, The VGIC CPU interface is mapped onto the GIC virtual CPU
> interface.
> 
> Signed-off-by: Eric Auger <eric.auger@xxxxxxxxxx>
> Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
> ---
>  include/kvm/vgic/vgic.h       |  1 +
>  virt/kvm/arm/vgic/vgic-init.c | 27 +++++++++++++++++++++++++
>  virt/kvm/arm/vgic/vgic-v2.c   | 47 +++++++++++++++++++++++++++++++++++++++++++
>  virt/kvm/arm/vgic/vgic-v3.c   | 44 ++++++++++++++++++++++++++++++++++++++++
>  virt/kvm/arm/vgic/vgic.h      |  7 +++++++
>  5 files changed, 126 insertions(+)
> 
> diff --git a/include/kvm/vgic/vgic.h b/include/kvm/vgic/vgic.h
> index 538078a..07c3011 100644
> --- a/include/kvm/vgic/vgic.h
> +++ b/include/kvm/vgic/vgic.h
> @@ -208,6 +208,7 @@ int kvm_vgic_create(struct kvm *kvm, u32 type);
>  void kvm_vgic_destroy(struct kvm *kvm);
>  void kvm_vgic_vcpu_early_init(struct kvm_vcpu *vcpu);
>  void kvm_vgic_vcpu_destroy(struct kvm_vcpu *vcpu);
> +int kvm_vgic_map_resources(struct kvm *kvm);
>  int kvm_vgic_hyp_init(void);
>  
>  int kvm_vgic_inject_irq(struct kvm *kvm, int cpuid, unsigned int intid,
> diff --git a/virt/kvm/arm/vgic/vgic-init.c b/virt/kvm/arm/vgic/vgic-init.c
> index 3f9c137..7fefb12 100644
> --- a/virt/kvm/arm/vgic/vgic-init.c
> +++ b/virt/kvm/arm/vgic/vgic-init.c
> @@ -321,6 +321,33 @@ int vgic_lazy_init(struct kvm *kvm)
>  	return ret;
>  }
>  
> +/* RESOURCE MAPPING */
> +
> +/**
> + * Map the MMIO regions depending on the VGIC model exposed to the guest
> + * called on the first VCPU run.
> + * Also map the virtual CPU interface into the VM.
> + * v2/v3 derivatives call vgic_init if not already done.
> + * Completion can be tested by vgic_ready

s/Completion can be tested by vgic_ready/
 vgic_ready() returns true if this function has succeeded/

> + */
> +int kvm_vgic_map_resources(struct kvm *kvm)
> +{
> +	struct vgic_dist *dist = &kvm->arch.vgic;
> +	int ret = 0;
> +
> +	mutex_lock(&kvm->lock);
> +	if (!irqchip_in_kernel(kvm))
> +		goto out;
> +
> +	if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V2)
> +		ret = vgic_v2_map_resources(kvm);
> +	else
> +		ret = vgic_v3_map_resources(kvm);
> +out:
> +	mutex_unlock(&kvm->lock);
> +	return ret;
> +}
> +
>  /* GENERIC PROBE */
>  
>  static void vgic_init_maintenance_interrupt(void *info)
> diff --git a/virt/kvm/arm/vgic/vgic-v2.c b/virt/kvm/arm/vgic/vgic-v2.c
> index 48aa877..1e411f5 100644
> --- a/virt/kvm/arm/vgic/vgic-v2.c
> +++ b/virt/kvm/arm/vgic/vgic-v2.c
> @@ -216,6 +216,53 @@ void vgic_v2_enable(struct kvm_vcpu *vcpu)
>  {
>  }
>  
> +int vgic_v2_map_resources(struct kvm *kvm)
> +{
> +	struct vgic_dist *dist = &kvm->arch.vgic;
> +	int ret = 0;
> +
> +	if (vgic_ready(kvm))
> +		goto out;
> +
> +	if (IS_VGIC_ADDR_UNDEF(dist->vgic_dist_base) ||
> +	    IS_VGIC_ADDR_UNDEF(dist->vgic_cpu_base)) {
> +		kvm_err("Need to set vgic cpu and dist addresses first\n");
> +		ret = -ENXIO;
> +		goto out;
> +	}
> +
> +	/*
> +	 * Initialize the vgic if this hasn't already been done on demand by
> +	 * accessing the vgic state from userspace.
> +	 */
> +	ret = vgic_init(kvm);
> +	if (ret) {
> +		kvm_err("Unable to initialize VGIC dynamic data structures\n");
> +		goto out;
> +	}
> +
> +	ret = vgic_register_dist_iodev(kvm, dist->vgic_dist_base, VGIC_V2);
> +	if (ret) {
> +		kvm_err("Unable to register VGIC MMIO regions\n");
> +		goto out;
> +	}
> +
> +	ret = kvm_phys_addr_ioremap(kvm, dist->vgic_cpu_base,
> +				    kvm_vgic_global_state.vcpu_base,
> +				    KVM_VGIC_V2_CPU_SIZE, true);
> +	if (ret) {
> +		kvm_err("Unable to remap VGIC CPU to VCPU\n");
> +		goto out;
> +	}
> +
> +	dist->ready = true;
> +
> +out:
> +	if (ret)
> +		kvm_vgic_destroy(kvm);
> +	return ret;
> +}
> +
>  /**
>   * vgic_v2_probe - probe for a GICv2 compatible interrupt controller in DT
>   * @node:	pointer to the DT node
> diff --git a/virt/kvm/arm/vgic/vgic-v3.c b/virt/kvm/arm/vgic/vgic-v3.c
> index 7cab5b9..4bfd42a 100644
> --- a/virt/kvm/arm/vgic/vgic-v3.c
> +++ b/virt/kvm/arm/vgic/vgic-v3.c
> @@ -200,6 +200,50 @@ void vgic_v3_enable(struct kvm_vcpu *vcpu)
>  {
>  }
>  
> +int vgic_v3_map_resources(struct kvm *kvm)
> +{
> +	int ret = 0;
> +	struct vgic_dist *dist = &kvm->arch.vgic;
> +
> +	if (vgic_ready(kvm))
> +		goto out;
> +
> +	if (IS_VGIC_ADDR_UNDEF(dist->vgic_dist_base) ||
> +	    IS_VGIC_ADDR_UNDEF(dist->vgic_redist_base)) {
> +		kvm_err("Need to set vgic distributor addresses first\n");
> +		ret = -ENXIO;
> +		goto out;
> +	}
> +
> +	/*
> +	 * For a VGICv3 we require the userland to explicitly initialize
> +	 * the VGIC before we need to use it.
> +	 */
> +	if (!vgic_initialized(kvm)) {
> +		ret = -EBUSY;
> +		goto out;
> +	}
> +
> +	ret = vgic_register_dist_iodev(kvm, dist->vgic_dist_base, VGIC_V3);
> +	if (ret) {
> +		kvm_err("Unable to register VGICv3 dist MMIO regions\n");
> +		goto out;
> +	}
> +
> +	ret = vgic_register_redist_iodevs(kvm, dist->vgic_redist_base);
> +	if (ret) {
> +		kvm_err("Unable to register VGICv3 redist MMIO regions\n");
> +		goto out;
> +	}
> +
> +	dist->ready = true;
> +
> +out:
> +	if (ret)
> +		kvm_vgic_destroy(kvm);
> +	return ret;
> +}
> +
>  /**
>   * vgic_v3_probe - probe for a GICv3 compatible interrupt controller in DT
>   * @node:	pointer to the DT node
> diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h
> index cad04eb..5c7dc99 100644
> --- a/virt/kvm/arm/vgic/vgic.h
> +++ b/virt/kvm/arm/vgic/vgic.h
> @@ -45,6 +45,7 @@ void vgic_v2_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
>  void vgic_v2_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
>  void vgic_v2_enable(struct kvm_vcpu *vcpu);
>  int vgic_v2_probe(struct device_node *vgic_node);
> +int vgic_v2_map_resources(struct kvm *kvm);
>  int vgic_register_dist_iodev(struct kvm *kvm, gpa_t dist_base_address,
>  			     enum vgic_type);
>  
> @@ -58,6 +59,7 @@ void vgic_v3_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
>  void vgic_v3_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
>  void vgic_v3_enable(struct kvm_vcpu *vcpu);
>  int vgic_v3_probe(struct device_node *vgic_node);
> +int vgic_v3_map_resources(struct kvm *kvm);
>  int vgic_register_redist_iodevs(struct kvm *kvm, gpa_t dist_base_address);
>  #else
>  static inline void vgic_v3_process_maintenance(struct kvm_vcpu *vcpu)
> @@ -100,6 +102,11 @@ static inline int vgic_v3_probe(struct device_node *vgic_node)
>  	return -ENODEV;
>  }
>  
> +static inline int vgic_v3_map_resources(struct kvm *kvm)
> +{
> +	return -ENODEV;
> +}
> +
>  static inline int vgic_register_redist_iodevs(struct kvm *kvm,
>  					      gpa_t dist_base_address)
>  {
> -- 
> 2.7.3
> 
Reviewed-by: Christoffer Dall <christoffer.dall@xxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux