Re: [RFC PATCH 45/45] KVM: arm/arm64: vgic-new: enable build

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 31/03/16 19:18, Christoffer Dall wrote:
> On Fri, Mar 25, 2016 at 02:05:08AM +0000, Andre Przywara wrote:
>> Now that the new VGIC implementation has reached feature parity with
>> the old one, add the new files to the build system and add a Kconfig
>> option to switch between the two versions.
>> We set the default to the new version to get maximum test coverage,
>> in case people experience problems they can switch back to the old
>> behaviour if needed.
>>
>> Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
>> ---
>>  arch/arm/kvm/Kconfig    |  7 +++++++
>>  arch/arm/kvm/Makefile   | 10 ++++++++++
>>  arch/arm64/kvm/Kconfig  |  7 +++++++
>>  arch/arm64/kvm/Makefile | 10 ++++++++++
>>  4 files changed, 34 insertions(+)
>>
>> diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig
>> index 95a0005..02abfff 100644
>> --- a/arch/arm/kvm/Kconfig
>> +++ b/arch/arm/kvm/Kconfig
>> @@ -46,6 +46,13 @@ config KVM_ARM_HOST
>>  	---help---
>>  	  Provides host support for ARM processors.
>>  
>> +config KVM_NEW_VGIC
>> +	bool "New VGIC implementation"
>> +	depends on KVM
>> +	default y
>> +	---help---
>> +	  uses the new VGIC implementation
>> +
> 
> I had imagined we'd name it in the reverse, so the option would have
> been CONFIG_KVM_VGIC_LEGACY, but I guess the net effect should be the
> same, assuming most people just go with the default anyway.

I think originally the assumption was to make the old VGIC the default
in the beginning, but that changed later. By that time I considered it
too tedious to change all patches in this regard, so I just kept the old
symbol and semantic in.
Shouldn't matter, really, I guess there are arguments for both ways.

Cheers,
Andre.

>>  source drivers/vhost/Kconfig
>>  
>>  endif # VIRTUALIZATION
>> diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile
>> index eb1bf43..aa7d724 100644
>> --- a/arch/arm/kvm/Makefile
>> +++ b/arch/arm/kvm/Makefile
>> @@ -21,7 +21,17 @@ obj-$(CONFIG_KVM_ARM_HOST) += hyp/
>>  obj-y += kvm-arm.o init.o interrupts.o
>>  obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o
>>  obj-y += coproc.o coproc_a15.o coproc_a7.o mmio.o psci.o perf.o
>> +
>> +ifeq ($(CONFIG_KVM_NEW_VGIC),y)
>> +obj-y += $(KVM)/arm/vgic/vgic.o
>> +obj-y += $(KVM)/arm/vgic/vgic_init.o
>> +obj-y += $(KVM)/arm/vgic/vgic_irqfd.o
>> +obj-y += $(KVM)/arm/vgic/vgic-v2.o
>> +obj-y += $(KVM)/arm/vgic/vgic_mmio.o
>> +obj-y += $(KVM)/arm/vgic/vgic_kvm_device.o
>> +else
>>  obj-y += $(KVM)/arm/vgic.o
>>  obj-y += $(KVM)/arm/vgic-v2.o
>>  obj-y += $(KVM)/arm/vgic-v2-emul.o
>> +endif
>>  obj-y += $(KVM)/arm/arch_timer.o
>> diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig
>> index de7450d..3f0e1ce 100644
>> --- a/arch/arm64/kvm/Kconfig
>> +++ b/arch/arm64/kvm/Kconfig
>> @@ -55,6 +55,13 @@ config KVM_ARM_PMU
>>  	  Adds support for a virtual Performance Monitoring Unit (PMU) in
>>  	  virtual machines.
>>  
>> +config KVM_NEW_VGIC
>> +	bool "New VGIC implementation"
>> +	depends on KVM
>> +	default y
>> +        ---help---
>> +          uses the new VGIC implementation
>> +
>>  source drivers/vhost/Kconfig
>>  
>>  endif # VIRTUALIZATION
>> diff --git a/arch/arm64/kvm/Makefile b/arch/arm64/kvm/Makefile
>> index 122cff4..2f5d431 100644
>> --- a/arch/arm64/kvm/Makefile
>> +++ b/arch/arm64/kvm/Makefile
>> @@ -20,10 +20,20 @@ kvm-$(CONFIG_KVM_ARM_HOST) += emulate.o inject_fault.o regmap.o
>>  kvm-$(CONFIG_KVM_ARM_HOST) += hyp.o hyp-init.o handle_exit.o
>>  kvm-$(CONFIG_KVM_ARM_HOST) += guest.o debug.o reset.o sys_regs.o sys_regs_generic_v8.o
>>  
>> +ifeq ($(CONFIG_KVM_NEW_VGIC),y)
>> +kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic/vgic.o
>> +kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic/vgic_init.o
>> +kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic/vgic_irqfd.o
>> +kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic/vgic-v2.o
>> +kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic/vgic-v3.o
>> +kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic/vgic_mmio.o
>> +kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic/vgic_kvm_device.o
>> +else
>>  kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic.o
>>  kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic-v2.o
>>  kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic-v2-emul.o
>>  kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic-v3.o
>>  kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic-v3-emul.o
>> +endif
>>  kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/arch_timer.o
>>  kvm-$(CONFIG_KVM_ARM_PMU) += $(KVM)/arm/pmu.o
>> -- 
>> 2.7.3
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe kvm" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux