Re: [PATCH v3 8/9] KVM: arm/arm64: vgic: Rely on the GIC driver to parse the firmware tables

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 08, 2016 at 11:29:32AM +0000, Julien Grall wrote:
> Currenlty, the firmware tables are parsed 2 times: once in the GIC

Currently,

> drivers, the other time when initializing the vGIC. It means code
> duplication and make more tedious to add the support for another
> firmware table (like ACPI).
> 
> Use the recently introduced helper gic_get_kvm_info() to get
> information about the virtual GIC.
> 
> With this change, the virtual GIC becomes agnostic to the firmware
> table and KVM will be able to initialize the vGIC on ACPI.
> 
> Signed-off-by: Julien Grall <julien.grall@xxxxxxx>
> 
> ---
> Cc: Christoffer Dall <christoffer.dall@xxxxxxxxxx>
> Cc: Marc Zyngier <marc.zyngier@xxxxxxx>
> Cc: Gleb Natapov <gleb@xxxxxxxxxx>
> Cc: Paolo Bonzini <pbonzini@xxxxxxxxxx>
> 
>     Changes in v2:
>         - Use 0 rather than a negative value to know when the maintenance IRQ
>         is not present.
>         - Use resource for vcpu and vctrl
> ---
>  include/kvm/arm_vgic.h |  7 +++---
>  virt/kvm/arm/vgic-v2.c | 67 ++++++++++++++++++--------------------------------
>  virt/kvm/arm/vgic-v3.c | 45 ++++++++++-----------------------
>  virt/kvm/arm/vgic.c    | 50 ++++++++++++++++++++-----------------
>  4 files changed, 68 insertions(+), 101 deletions(-)
> 
> diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
> index 13a3d53..ed62772 100644
> --- a/include/kvm/arm_vgic.h
> +++ b/include/kvm/arm_vgic.h
> @@ -25,6 +25,7 @@
>  #include <linux/spinlock.h>
>  #include <linux/types.h>
>  #include <kvm/iodev.h>
> +#include <linux/irqchip/arm-gic-common.h>
>  
>  #define VGIC_NR_IRQS_LEGACY	256
>  #define VGIC_NR_SGIS		16
> @@ -357,15 +358,15 @@ bool kvm_vgic_map_is_active(struct kvm_vcpu *vcpu, struct irq_phys_map *map);
>  #define vgic_initialized(k)	(!!((k)->arch.vgic.nr_cpus))
>  #define vgic_ready(k)		((k)->arch.vgic.ready)
>  
> -int vgic_v2_probe(struct device_node *vgic_node,
> +int vgic_v2_probe(const struct gic_kvm_info *gic_kvm_info,
>  		  const struct vgic_ops **ops,
>  		  const struct vgic_params **params);
>  #ifdef CONFIG_KVM_ARM_VGIC_V3
> -int vgic_v3_probe(struct device_node *vgic_node,
> +int vgic_v3_probe(const struct gic_kvm_info *gic_kvm_info,
>  		  const struct vgic_ops **ops,
>  		  const struct vgic_params **params);
>  #else
> -static inline int vgic_v3_probe(struct device_node *vgic_node,
> +static inline int vgic_v3_probe(const struct gic_kvm_info *gic_kvm_info,
>  				const struct vgic_ops **ops,
>  				const struct vgic_params **params)
>  {
> diff --git a/virt/kvm/arm/vgic-v2.c b/virt/kvm/arm/vgic-v2.c
> index ff02f08..3598cd4 100644
> --- a/virt/kvm/arm/vgic-v2.c
> +++ b/virt/kvm/arm/vgic-v2.c
> @@ -20,9 +20,6 @@
>  #include <linux/kvm_host.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
> -#include <linux/of.h>
> -#include <linux/of_address.h>
> -#include <linux/of_irq.h>
>  
>  #include <linux/irqchip/arm-gic.h>
>  
> @@ -177,38 +174,38 @@ static const struct vgic_ops vgic_v2_ops = {
>  static struct vgic_params vgic_v2_params;
>  
>  /**
> - * vgic_v2_probe - probe for a GICv2 compatible interrupt controller in DT
> - * @node:	pointer to the DT node
> - * @ops: 	address of a pointer to the GICv2 operations
> - * @params:	address of a pointer to HW-specific parameters
> + * vgic_v2_probe - probe for a GICv2 compatible interrupt controller
> + * @gic_kvm_info:	pointer to the GIC description
> + * @ops:		address of a pointer to the GICv2 operations
> + * @params:		address of a pointer to HW-specific parameters
>   *
>   * Returns 0 if a GICv2 has been found, with the low level operations
>   * in *ops and the HW parameters in *params. Returns an error code
>   * otherwise.
>   */
> -int vgic_v2_probe(struct device_node *vgic_node,
> -		  const struct vgic_ops **ops,
> -		  const struct vgic_params **params)
> +int vgic_v2_probe(const struct gic_kvm_info *gic_kvm_info,
> +		   const struct vgic_ops **ops,
> +		   const struct vgic_params **params)
>  {
>  	int ret;
> -	struct resource vctrl_res;
> -	struct resource vcpu_res;
>  	struct vgic_params *vgic = &vgic_v2_params;
> +	resource_size_t vctrl_size = resource_size(&gic_kvm_info->vctrl);
>  
> -	vgic->maint_irq = irq_of_parse_and_map(vgic_node, 0);
> -	if (!vgic->maint_irq) {
> -		kvm_err("error getting vgic maintenance irq from DT\n");
> +	if (!gic_kvm_info->maint_irq) {
> +		kvm_err("error getting vgic maintenance irq\n");
>  		ret = -ENXIO;
>  		goto out;
>  	}
> +	vgic->maint_irq = gic_kvm_info->maint_irq;
>  
> -	ret = of_address_to_resource(vgic_node, 2, &vctrl_res);
> -	if (ret) {
> -		kvm_err("Cannot obtain GICH resource\n");
> +	if (!gic_kvm_info->vctrl.start) {
> +		kvm_err("GICH not present in the firmware table\n");
> +		ret = -ENXIO;
>  		goto out;
>  	}
>  
> -	vgic->vctrl_base = of_iomap(vgic_node, 2);
> +	vgic->vctrl_base = ioremap(gic_kvm_info->vctrl.start,
> +				   resource_size(&gic_kvm_info->vctrl));
>  	if (!vgic->vctrl_base) {
>  		kvm_err("Cannot ioremap GICH\n");
>  		ret = -ENOMEM;
> @@ -219,30 +216,15 @@ int vgic_v2_probe(struct device_node *vgic_node,
>  	vgic->nr_lr = (vgic->nr_lr & 0x3f) + 1;
>  
>  	ret = create_hyp_io_mappings(vgic->vctrl_base,
> -				     vgic->vctrl_base + resource_size(&vctrl_res),
> -				     vctrl_res.start);
> +				     vgic->vctrl_base + vctrl_size,
> +				     gic_kvm_info->vctrl.start);
>  	if (ret) {
> -		kvm_err("Cannot map VCTRL into hyp\n");
> -		goto out_unmap;
> -	}
> -
> -	if (of_address_to_resource(vgic_node, 3, &vcpu_res)) {
> -		kvm_err("Cannot obtain GICV resource\n");
> -		ret = -ENXIO;
> -		goto out_unmap;
> -	}
> -
> -	if (!PAGE_ALIGNED(vcpu_res.start)) {
> -		kvm_err("GICV physical address 0x%llx not page aligned\n",
> -			(unsigned long long)vcpu_res.start);
> -		ret = -ENXIO;
> +		kvm_err("Cannot map VCTLR into hyp\n");
>  		goto out_unmap;
>  	}
>  
> -	if (!PAGE_ALIGNED(resource_size(&vcpu_res))) {
> -		kvm_err("GICV size 0x%llx not a multiple of page size 0x%lx\n",
> -			(unsigned long long)resource_size(&vcpu_res),
> -			PAGE_SIZE);
> +	if (!gic_kvm_info->vcpu.start) {
> +		kvm_err("GICV not present in the firmware table\n");
>  		ret = -ENXIO;
>  		goto out_unmap;
>  	}
> @@ -250,10 +232,10 @@ int vgic_v2_probe(struct device_node *vgic_node,
>  	vgic->can_emulate_gicv2 = true;
>  	kvm_register_device_ops(&kvm_arm_vgic_v2_ops, KVM_DEV_TYPE_ARM_VGIC_V2);
>  
> -	vgic->vcpu_base = vcpu_res.start;
> +	vgic->vcpu_base = gic_kvm_info->vcpu.start;
>  
> -	kvm_info("%s@%llx IRQ%d\n", vgic_node->name,
> -		 vctrl_res.start, vgic->maint_irq);
> +	kvm_info("GICH base=0x%llx, GICV base=0x%llx, IRQ=%d\n",
> +		 gic_kvm_info->vctrl.start, vgic->vcpu_base, vgic->maint_irq);
>  
>  	vgic->type = VGIC_V2;
>  	vgic->max_gic_vcpus = VGIC_V2_MAX_CPUS;
> @@ -264,6 +246,5 @@ int vgic_v2_probe(struct device_node *vgic_node,
>  out_unmap:
>  	iounmap(vgic->vctrl_base);
>  out:
> -	of_node_put(vgic_node);
>  	return ret;
>  }
> diff --git a/virt/kvm/arm/vgic-v3.c b/virt/kvm/arm/vgic-v3.c
> index 453eafd..92c1f04 100644
> --- a/virt/kvm/arm/vgic-v3.c
> +++ b/virt/kvm/arm/vgic-v3.c
> @@ -20,11 +20,9 @@
>  #include <linux/kvm_host.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
> -#include <linux/of.h>
> -#include <linux/of_address.h>
> -#include <linux/of_irq.h>
>  
>  #include <linux/irqchip/arm-gic-v3.h>
> +#include <linux/irqchip/arm-gic-common.h>
>  
>  #include <asm/kvm_emulate.h>
>  #include <asm/kvm_arm.h>
> @@ -217,30 +215,28 @@ static const struct vgic_ops vgic_v3_ops = {
>  static struct vgic_params vgic_v3_params;
>  
>  /**
> - * vgic_v3_probe - probe for a GICv3 compatible interrupt controller in DT
> - * @node:	pointer to the DT node
> - * @ops: 	address of a pointer to the GICv3 operations
> - * @params:	address of a pointer to HW-specific parameters
> + * vgic_v3_probe - probe for a GICv3 compatible interrupt controller
> + * @gic_kvm_info:	pointer to the GIC description
> + * @ops:		address of a pointer to the GICv3 operations
> + * @params:		address of a pointer to HW-specific parameters
>   *
>   * Returns 0 if a GICv3 has been found, with the low level operations
>   * in *ops and the HW parameters in *params. Returns an error code
>   * otherwise.
>   */
> -int vgic_v3_probe(struct device_node *vgic_node,
> +int vgic_v3_probe(const struct gic_kvm_info *gic_kvm_info,
>  		  const struct vgic_ops **ops,
>  		  const struct vgic_params **params)
>  {
>  	int ret = 0;
> -	u32 gicv_idx;
> -	struct resource vcpu_res;
>  	struct vgic_params *vgic = &vgic_v3_params;
>  
> -	vgic->maint_irq = irq_of_parse_and_map(vgic_node, 0);
> -	if (!vgic->maint_irq) {
> -		kvm_err("error getting vgic maintenance irq from DT\n");
> +	if (!gic_kvm_info->maint_irq) {
> +		kvm_err("error getting vgic maintenance irq\n");
>  		ret = -ENXIO;
>  		goto out;
>  	}
> +	vgic->maint_irq = gic_kvm_info->maint_irq;
>  
>  	ich_vtr_el2 = kvm_call_hyp(__vgic_v3_get_ich_vtr_el2);
>  
> @@ -251,24 +247,11 @@ int vgic_v3_probe(struct device_node *vgic_node,
>  	vgic->nr_lr = (ich_vtr_el2 & 0xf) + 1;
>  	vgic->can_emulate_gicv2 = false;
>  
> -	if (of_property_read_u32(vgic_node, "#redistributor-regions", &gicv_idx))
> -		gicv_idx = 1;
> -
> -	gicv_idx += 3; /* Also skip GICD, GICC, GICH */
> -	if (of_address_to_resource(vgic_node, gicv_idx, &vcpu_res)) {
> +	if (!gic_kvm_info->vcpu.start) {
>  		kvm_info("GICv3: no GICV resource entry\n");
>  		vgic->vcpu_base = 0;
> -	} else if (!PAGE_ALIGNED(vcpu_res.start)) {
> -		pr_warn("GICV physical address 0x%llx not page aligned\n",
> -			(unsigned long long)vcpu_res.start);
> -		vgic->vcpu_base = 0;
> -	} else if (!PAGE_ALIGNED(resource_size(&vcpu_res))) {
> -		pr_warn("GICV size 0x%llx not a multiple of page size 0x%lx\n",
> -			(unsigned long long)resource_size(&vcpu_res),
> -			PAGE_SIZE);
> -		vgic->vcpu_base = 0;
>  	} else {
> -		vgic->vcpu_base = vcpu_res.start;
> +		vgic->vcpu_base = gic_kvm_info->vcpu.start;
>  		vgic->can_emulate_gicv2 = true;
>  		kvm_register_device_ops(&kvm_arm_vgic_v2_ops,
>  					KVM_DEV_TYPE_ARM_VGIC_V2);
> @@ -281,13 +264,11 @@ int vgic_v3_probe(struct device_node *vgic_node,
>  	vgic->type = VGIC_V3;
>  	vgic->max_gic_vcpus = VGIC_V3_MAX_CPUS;
>  
> -	kvm_info("%s@%llx IRQ%d\n", vgic_node->name,
> -		 vcpu_res.start, vgic->maint_irq);
> -
> +	kvm_info("GICV base=0x%llx, IRQ=%d\n",
> +		 vgic->vcpu_base, vgic->maint_irq);
>  	*ops = &vgic_v3_ops;
>  	*params = vgic;
>  
>  out:
> -	of_node_put(vgic_node);
>  	return ret;
>  }
> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
> index 00429b3..60668a7 100644
> --- a/virt/kvm/arm/vgic.c
> +++ b/virt/kvm/arm/vgic.c
> @@ -21,9 +21,7 @@
>  #include <linux/kvm_host.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
> -#include <linux/of.h>
> -#include <linux/of_address.h>
> -#include <linux/of_irq.h>
> +#include <linux/irq.h>
>  #include <linux/rculist.h>
>  #include <linux/uaccess.h>
>  
> @@ -33,6 +31,7 @@
>  #include <trace/events/kvm.h>
>  #include <asm/kvm.h>
>  #include <kvm/iodev.h>
> +#include <linux/irqchip/arm-gic-common.h>
>  
>  #define CREATE_TRACE_POINTS
>  #include "trace.h"
> @@ -2389,33 +2388,38 @@ static struct notifier_block vgic_cpu_nb = {
>  	.notifier_call = vgic_cpu_notify,
>  };
>  
> -static const struct of_device_id vgic_ids[] = {
> -	{ .compatible = "arm,cortex-a15-gic",	.data = vgic_v2_probe, },
> -	{ .compatible = "arm,cortex-a7-gic",	.data = vgic_v2_probe, },
> -	{ .compatible = "arm,gic-400",		.data = vgic_v2_probe, },
> -	{ .compatible = "arm,gic-v3",		.data = vgic_v3_probe, },
> -	{},
> -};
> -
> -int kvm_vgic_hyp_init(void)
> +static int kvm_vgic_probe(void)
>  {
> -	const struct of_device_id *matched_id;
> -	const int (*vgic_probe)(struct device_node *,const struct vgic_ops **,
> -				const struct vgic_params **);
> -	struct device_node *vgic_node;
> +	const struct gic_kvm_info *gic_kvm_info;
>  	int ret;
>  
> -	vgic_node = of_find_matching_node_and_match(NULL,
> -						    vgic_ids, &matched_id);
> -	if (!vgic_node) {
> -		kvm_err("error: no compatible GIC node found\n");
> +	gic_kvm_info = gic_get_kvm_info();
> +	if (!gic_kvm_info)
>  		return -ENODEV;
> +
> +	switch (gic_kvm_info->type) {
> +	case GIC_V2:
> +		ret = vgic_v2_probe(gic_kvm_info, &vgic_ops, &vgic);
> +		break;
> +	case GIC_V3:
> +		ret = vgic_v3_probe(gic_kvm_info, &vgic_ops, &vgic);
> +		break;
> +	default:
> +		ret = -ENODEV;
>  	}
>  
> -	vgic_probe = matched_id->data;
> -	ret = vgic_probe(vgic_node, &vgic_ops, &vgic);
> -	if (ret)
> +	return ret;
> +}
> +
> +int kvm_vgic_hyp_init(void)
> +{
> +	int ret;
> +
> +	ret = kvm_vgic_probe();
> +	if (ret) {
> +		kvm_err("error: KVM vGIC probing failed\n");
>  		return ret;
> +	}
>  
>  	ret = request_percpu_irq(vgic->maint_irq, vgic_maintenance_handler,
>  				 "vgic", kvm_get_running_vcpus());
> -- 
> 1.9.1
> 

Acked-by: Christoffer Dall <christoffer.dall@xxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux