PCI PM 1.2 specifies that the device will perform an internal reset upon
transitioning from D3hot to D0 when the NO_SOFT_RESET bit is clear. This
method can be used to reset a function if neither PCIe FLR nor PCI AF FLR
are supported.
Signed-off-by: Yu Zhao <yu.zhao@xxxxxxxxx>
---
drivers/pci/pci.c | 34 ++++++++++++++++++++++++++++++++++
1 files changed, 34 insertions(+), 0 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 46ae997..e459a0b 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2085,6 +2085,36 @@ clear:
return 0;
}
+static int pci_pm_reset(struct pci_dev *dev, int probe)
+{
+ u16 csr;
+
+ if (!dev->pm_cap)
+ return -ENOTTY;
+
+ pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &csr);
+ if (csr & PCI_PM_CTRL_NO_SOFT_RESET)
+ return -ENOTTY;
+
+ if (probe)
+ return 0;
+
+ if (dev->current_state != PCI_D0)
+ return -EINVAL;
+
+ csr &= ~PCI_PM_CTRL_STATE_MASK;
+ csr |= PCI_D3hot;
+ pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
+ msleep(pci_pm_d3_delay);
+
+ csr &= ~PCI_PM_CTRL_STATE_MASK;
+ csr |= PCI_D0;
+ pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
+ msleep(pci_pm_d3_delay);
+
+ return 0;
+}
+
static int pci_dev_reset(struct pci_dev *dev, int probe)
{
int rc;
@@ -2102,6 +2132,10 @@ static int pci_dev_reset(struct pci_dev *dev, int probe)
goto done;
rc = pci_af_flr(dev, probe);
+ if (rc != -ENOTTY)
+ goto done;
+
+ rc = pci_pm_reset(dev, probe);
done:
up(&dev->dev.sem);
--
1.5.6.4
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
