Re: VFIO based vGPU(was Re: [Announcement] 2015-Q3 release of XenGT - a Mediated ...)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2016-01-26 at 22:05 +0800, Yang Zhang wrote:
> On 2016/1/26 15:41, Jike Song wrote:
> > On 01/26/2016 05:30 AM, Alex Williamson wrote:
> > > [cc +Neo @Nvidia]
> > > 
> > > Hi Jike,
> > > 
> > > On Mon, 2016-01-25 at 19:34 +0800, Jike Song wrote:
> > > > On 01/20/2016 05:05 PM, Tian, Kevin wrote:
> > > > > I would expect we can spell out next level tasks toward above
> > > > > direction, upon which Alex can easily judge whether there are
> > > > > some common VFIO framework changes that he can help :-)
> > > > 
> > > > Hi Alex,
> > > > 
> > > > Here is a draft task list after a short discussion w/ Kevin,
> > > > would you please have a look?
> > > > 
> > > > 	Bus Driver
> > > > 
> > > > 		{ in i915/vgt/xxx.c }
> > > > 
> > > > 		- define a subset of vfio_pci interfaces
> > > > 		- selective pass-through (say aperture)
> > > > 		- trap MMIO: interface w/ QEMU
> > > 
> > > What's included in the subset?  Certainly the bus reset ioctls really
> > > don't apply, but you'll need to support the full device interface,
> > > right?  That includes the region info ioctl and access through the vfio
> > > device file descriptor as well as the interrupt info and setup ioctls.
> > > 
> > 
> > [All interfaces I thought are via ioctl:)  For other stuff like file
> > descriptor we'll definitely keep it.]
> > 
> > The list of ioctl commands provided by vfio_pci:
> > 
> > 	- VFIO_DEVICE_GET_PCI_HOT_RESET_INFO
> > 	- VFIO_DEVICE_PCI_HOT_RESET
> > 
> > As you said, above 2 don't apply. But for this:
> > 
> > 	- VFIO_DEVICE_RESET
> > 
> > In my opinion it should be kept, no matter what will be provided in
> > the bus driver.
> > 
> > 	- VFIO_PCI_ROM_REGION_INDEX
> > 	- VFIO_PCI_VGA_REGION_INDEX
> > 
> > I suppose above 2 don't apply neither? For a vgpu we don't provide a
> > ROM BAR or VGA region.
> > 
> > 	- VFIO_DEVICE_GET_INFO
> > 	- VFIO_DEVICE_GET_REGION_INFO
> > 	- VFIO_DEVICE_GET_IRQ_INFO
> > 	- VFIO_DEVICE_SET_IRQS
> > 
> > Above 4 are needed of course.
> > 
> > We will need to extend:
> > 
> > 	- VFIO_DEVICE_GET_REGION_INFO
> > 
> > 
> > a) adding a flag: DONT_MAP. For example, the MMIO of vgpu
> > should be trapped instead of being mmap-ed.
> 
> I may not in the context, but i am curious how to handle the DONT_MAP in 
> vfio driver? Since there are no real MMIO maps into the region and i 
> suppose the access to the region should be handled by vgpu in i915 
> driver, but currently most of the mmio accesses are handled by Qemu.

VFIO supports the following region attributes:

#define VFIO_REGION_INFO_FLAG_READ      (1 << 0) /* Region supports read */
#define VFIO_REGION_INFO_FLAG_WRITE     (1 << 1) /* Region supports write */
#define VFIO_REGION_INFO_FLAG_MMAP      (1 << 2) /* Region supports mmap */

If MMAP is not set, then the QEMU driver will do pread and/or pwrite to
the specified offsets of the device file descriptor, depending on what
accesses are supported.  This is all reported through the REGION_INFO
ioctl for a given index.  If mmap is supported, the VM will have direct
access to the area, without faulting to KVM other than to populate the
mapping.  Without mmap support, a VM MMIO access traps into KVM, which
returns out to QEMU to service the request, which then finds the
MemoryRegion serviced through vfio, which will then perform a
pread/pwrite through to the kernel vfio bus driver to handle the
access.  Thanks,

Alex
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux