Signed-off-by: Lan Tianyu <tianyu.lan@xxxxxxxxx>
---
hw/vfio/pci.c | 137 +-------------------------------------------------
hw/vfio/pci.h | 158 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 159 insertions(+), 136 deletions(-)
create mode 100644 hw/vfio/pci.h
diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index e0e339a..5c3f8a7 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -42,138 +42,7 @@
#include "trace.h"
#include "hw/vfio/vfio.h"
#include "hw/vfio/vfio-common.h"
-
-struct VFIOPCIDevice;
-
-typedef struct VFIOQuirk {
- MemoryRegion mem;
- struct VFIOPCIDevice *vdev;
- QLIST_ENTRY(VFIOQuirk) next;
- struct {
- uint32_t base_offset:TARGET_PAGE_BITS;
- uint32_t address_offset:TARGET_PAGE_BITS;
- uint32_t address_size:3;
- uint32_t bar:3;
-
- uint32_t address_match;
- uint32_t address_mask;
-
- uint32_t address_val:TARGET_PAGE_BITS;
- uint32_t data_offset:TARGET_PAGE_BITS;
- uint32_t data_size:3;
-
- uint8_t flags;
- uint8_t read_flags;
- uint8_t write_flags;
- } data;
-} VFIOQuirk;
-
-typedef struct VFIOBAR {
- VFIORegion region;
- bool ioport;
- bool mem64;
- QLIST_HEAD(, VFIOQuirk) quirks;
-} VFIOBAR;
-
-typedef struct VFIOVGARegion {
- MemoryRegion mem;
- off_t offset;
- int nr;
- QLIST_HEAD(, VFIOQuirk) quirks;
-} VFIOVGARegion;
-
-typedef struct VFIOVGA {
- off_t fd_offset;
- int fd;
- VFIOVGARegion region[QEMU_PCI_VGA_NUM_REGIONS];
-} VFIOVGA;
-
-typedef struct VFIOINTx {
- bool pending; /* interrupt pending */
- bool kvm_accel; /* set when QEMU bypass through KVM enabled */
- uint8_t pin; /* which pin to pull for qemu_set_irq */
- EventNotifier interrupt; /* eventfd triggered on interrupt */
- EventNotifier unmask; /* eventfd for unmask on QEMU bypass */
- PCIINTxRoute route; /* routing info for QEMU bypass */
- uint32_t mmap_timeout; /* delay to re-enable mmaps after interrupt */
- QEMUTimer *mmap_timer; /* enable mmaps after periods w/o interrupts */
-} VFIOINTx;
-
-typedef struct VFIOMSIVector {
- /*
- * Two interrupt paths are configured per vector. The first, is only used
- * for interrupts injected via QEMU. This is typically the non-accel path,
- * but may also be used when we want QEMU to handle masking and pending
- * bits. The KVM path bypasses QEMU and is therefore higher performance,
- * but requires masking at the device. virq is used to track the MSI route
- * through KVM, thus kvm_interrupt is only available when virq is set to a
- * valid (>= 0) value.
- */
- EventNotifier interrupt;
- EventNotifier kvm_interrupt;
- struct VFIOPCIDevice *vdev; /* back pointer to device */
- int virq;
- bool use;
-} VFIOMSIVector;
-
-enum {
- VFIO_INT_NONE = 0,
- VFIO_INT_INTx = 1,
- VFIO_INT_MSI = 2,
- VFIO_INT_MSIX = 3,
-};
-
-/* Cache of MSI-X setup plus extra mmap and memory region for split BAR map */
-typedef struct VFIOMSIXInfo {
- uint8_t table_bar;
- uint8_t pba_bar;
- uint16_t entries;
- uint32_t table_offset;
- uint32_t pba_offset;
- MemoryRegion mmap_mem;
- void *mmap;
-} VFIOMSIXInfo;
-
-typedef struct VFIOPCIDevice {
- PCIDevice pdev;
- VFIODevice vbasedev;
- VFIOINTx intx;
- unsigned int config_size;
- uint8_t *emulated_config_bits; /* QEMU emulated bits, little-endian */
- off_t config_offset; /* Offset of config space region within device fd */
- unsigned int rom_size;
- off_t rom_offset; /* Offset of ROM region within device fd */
- void *rom;
- int msi_cap_size;
- VFIOMSIVector *msi_vectors;
- VFIOMSIXInfo *msix;
- int nr_vectors; /* Number of MSI/MSIX vectors currently in use */
- int interrupt; /* Current interrupt type */
- VFIOBAR bars[PCI_NUM_REGIONS - 1]; /* No ROM */
- VFIOVGA vga; /* 0xa0000, 0x3b0, 0x3c0 */
- PCIHostDeviceAddress host;
- EventNotifier err_notifier;
- EventNotifier req_notifier;
- int (*resetfn)(struct VFIOPCIDevice *);
- uint32_t features;
-#define VFIO_FEATURE_ENABLE_VGA_BIT 0
-#define VFIO_FEATURE_ENABLE_VGA (1 << VFIO_FEATURE_ENABLE_VGA_BIT)
-#define VFIO_FEATURE_ENABLE_REQ_BIT 1
-#define VFIO_FEATURE_ENABLE_REQ (1 << VFIO_FEATURE_ENABLE_REQ_BIT)
- int32_t bootindex;
- uint8_t pm_cap;
- bool has_vga;
- bool pci_aer;
- bool req_enabled;
- bool has_flr;
- bool has_pm_reset;
- bool rom_read_failed;
-} VFIOPCIDevice;
-
-typedef struct VFIORomBlacklistEntry {
- uint16_t vendor_id;
- uint16_t device_id;
-} VFIORomBlacklistEntry;
+#include "hw/vfio/pci.h"
/*
* List of device ids/vendor ids for which to disable
@@ -193,12 +62,8 @@ static const VFIORomBlacklistEntry romblacklist[] = {
{ 0x14e4, 0x168e }
};
-#define MSIX_CAP_LENGTH 12
static void vfio_disable_interrupts(VFIOPCIDevice *vdev);
-static uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len);
-static void vfio_pci_write_config(PCIDevice *pdev, uint32_t addr,
- uint32_t val, int len);
static void vfio_mmap_set_enabled(VFIOPCIDevice *vdev, bool enabled);
/*
diff --git a/hw/vfio/pci.h b/hw/vfio/pci.h
new file mode 100644
index 0000000..9f360bf
--- /dev/null
+++ b/hw/vfio/pci.h
@@ -0,0 +1,158 @@
+#include <dirent.h>
+#include <linux/vfio.h>
+#include <sys/ioctl.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+#include "config.h"
+#include "exec/address-spaces.h"
+#include "exec/memory.h"
+#include "hw/pci/msi.h"
+#include "hw/pci/msix.h"
+#include "hw/pci/pci.h"
+#include "qemu-common.h"
+#include "qemu/error-report.h"
+#include "qemu/event_notifier.h"
+#include "qemu/queue.h"
+#include "qemu/range.h"
+#include "sysemu/kvm.h"
+#include "sysemu/sysemu.h"
+#include "trace.h"
+#include "hw/vfio/vfio.h"
+#include "hw/vfio/vfio-common.h"
+
+struct VFIOPCIDevice;
+
+typedef struct VFIOQuirk {
+ MemoryRegion mem;
+ struct VFIOPCIDevice *vdev;
+ QLIST_ENTRY(VFIOQuirk) next;
+ struct {
+ uint32_t base_offset:TARGET_PAGE_BITS;
+ uint32_t address_offset:TARGET_PAGE_BITS;
+ uint32_t address_size:3;
+ uint32_t bar:3;
+
+ uint32_t address_match;
+ uint32_t address_mask;
+
+ uint32_t address_val:TARGET_PAGE_BITS;
+ uint32_t data_offset:TARGET_PAGE_BITS;
+ uint32_t data_size:3;
+
+ uint8_t flags;
+ uint8_t read_flags;
+ uint8_t write_flags;
+ } data;
+} VFIOQuirk;
+
+typedef struct VFIOBAR {
+ VFIORegion region;
+ bool ioport;
+ bool mem64;
+ QLIST_HEAD(, VFIOQuirk) quirks;
+} VFIOBAR;
+
+typedef struct VFIOVGARegion {
+ MemoryRegion mem;
+ off_t offset;
+ int nr;
+ QLIST_HEAD(, VFIOQuirk) quirks;
+} VFIOVGARegion;
+
+typedef struct VFIOVGA {
+ off_t fd_offset;
+ int fd;
+ VFIOVGARegion region[QEMU_PCI_VGA_NUM_REGIONS];
+} VFIOVGA;
+
+typedef struct VFIOINTx {
+ bool pending; /* interrupt pending */
+ bool kvm_accel; /* set when QEMU bypass through KVM enabled */
+ uint8_t pin; /* which pin to pull for qemu_set_irq */
+ EventNotifier interrupt; /* eventfd triggered on interrupt */
+ EventNotifier unmask; /* eventfd for unmask on QEMU bypass */
+ PCIINTxRoute route; /* routing info for QEMU bypass */
+ uint32_t mmap_timeout; /* delay to re-enable mmaps after interrupt */
+ QEMUTimer *mmap_timer; /* enable mmaps after periods w/o interrupts */
+} VFIOINTx;
+
+typedef struct VFIOMSIVector {
+ /*
+ * Two interrupt paths are configured per vector. The first, is only used
+ * for interrupts injected via QEMU. This is typically the non-accel path,
+ * but may also be used when we want QEMU to handle masking and pending
+ * bits. The KVM path bypasses QEMU and is therefore higher performance,
+ * but requires masking at the device. virq is used to track the MSI route
+ * through KVM, thus kvm_interrupt is only available when virq is set to a
+ * valid (>= 0) value.
+ */
+ EventNotifier interrupt;
+ EventNotifier kvm_interrupt;
+ struct VFIOPCIDevice *vdev; /* back pointer to device */
+ int virq;
+ bool use;
+} VFIOMSIVector;
+
+enum {
+ VFIO_INT_NONE = 0,
+ VFIO_INT_INTx = 1,
+ VFIO_INT_MSI = 2,
+ VFIO_INT_MSIX = 3,
+};
+
+/* Cache of MSI-X setup plus extra mmap and memory region for split BAR map */
+typedef struct VFIOMSIXInfo {
+ uint8_t table_bar;
+ uint8_t pba_bar;
+ uint16_t entries;
+ uint32_t table_offset;
+ uint32_t pba_offset;
+ MemoryRegion mmap_mem;
+ void *mmap;
+} VFIOMSIXInfo;
+
+typedef struct VFIOPCIDevice {
+ PCIDevice pdev;
+ VFIODevice vbasedev;
+ VFIOINTx intx;
+ unsigned int config_size;
+ uint8_t *emulated_config_bits; /* QEMU emulated bits, little-endian */
+ off_t config_offset; /* Offset of config space region within device fd */
+ unsigned int rom_size;
+ off_t rom_offset; /* Offset of ROM region within device fd */
+ void *rom;
+ int msi_cap_size;
+ VFIOMSIVector *msi_vectors;
+ VFIOMSIXInfo *msix;
+ int nr_vectors; /* Number of MSI/MSIX vectors currently in use */
+ int interrupt; /* Current interrupt type */
+ VFIOBAR bars[PCI_NUM_REGIONS - 1]; /* No ROM */
+ VFIOVGA vga; /* 0xa0000, 0x3b0, 0x3c0 */
+ PCIHostDeviceAddress host;
+ EventNotifier err_notifier;
+ EventNotifier req_notifier;
+ int (*resetfn)(struct VFIOPCIDevice *);
+ uint32_t features;
+#define VFIO_FEATURE_ENABLE_VGA_BIT 0
+#define VFIO_FEATURE_ENABLE_VGA (1 << VFIO_FEATURE_ENABLE_VGA_BIT)
+#define VFIO_FEATURE_ENABLE_REQ_BIT 1
+#define VFIO_FEATURE_ENABLE_REQ (1 << VFIO_FEATURE_ENABLE_REQ_BIT)
+ int32_t bootindex;
+ uint8_t pm_cap;
+ bool has_vga;
+ bool pci_aer;
+ bool req_enabled;
+ bool has_flr;
+ bool has_pm_reset;
+ bool rom_read_failed;
+} VFIOPCIDevice;
+
+typedef struct VFIORomBlacklistEntry {
+ uint16_t vendor_id;
+ uint16_t device_id;
+} VFIORomBlacklistEntry;
+
+#define MSIX_CAP_LENGTH 12
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
