[v2] KVM: VMX: Fix commit which broke PML

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I found PML was broken since below commit:

	commit feda805fe7c4ed9cf78158e73b1218752e3b4314
	Author: Xiao Guangrong <guangrong.xiao@xxxxxxxxxxxxxxx>
	Date:   Wed Sep 9 14:05:55 2015 +0800

	KVM: VMX: unify SECONDARY_VM_EXEC_CONTROL update

	Unify the update in vmx_cpuid_update()

	Signed-off-by: Xiao Guangrong <guangrong.xiao@xxxxxxxxxxxxxxx>
	[Rewrite to use vmcs_set_secondary_exec_control. - Paolo]
	Signed-off-by: Paolo Bonzini <pbonzini@xxxxxxxxxx>

The reason is in above commit vmx_cpuid_update calls vmx_secondary_exec_control,
in which currently SECONDARY_EXEC_ENABLE_PML bit is cleared unconditionally (as
PML is enabled in creating vcpu). Therefore if vcpu_cpuid_update is called after
vcpu is created, PML will be disabled unexpectedly while log-dirty code still
thinks PML is used.

Fix this by clearing SECONDARY_EXEC_ENABLE_PML in vmx_secondary_exec_control
only when PML is not supported or not enabled (!enable_pml). This is more
reasonable as PML is currently either always enabled or disabled. With this
explicit updating SECONDARY_EXEC_ENABLE_PML in vmx_enable{disable}_pml is not
needed so also rename vmx_enable{disable}_pml to vmx_create{destroy}_pml_buffer.

Signed-off-by: Kai Huang <kai.huang@xxxxxxxxxxxxxxx>

---

v1->v2: Fix this by following Paolo's suggestion. It's better to not to clear
SECONDARY_EXEC_ENABLE_PML in vmx_secondary_exec_control unconditionally but only
clear it when PML is not supported or enabled.

---
 arch/x86/kvm/vmx.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 2ac11641..89f4fa2 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -4718,8 +4718,9 @@ static u32 vmx_secondary_exec_control(struct vcpu_vmx *vmx)
 	   a current VMCS12
 	*/
 	exec_control &= ~SECONDARY_EXEC_SHADOW_VMCS;
-	/* PML is enabled/disabled in creating/destorying vcpu */
-	exec_control &= ~SECONDARY_EXEC_ENABLE_PML;
+
+	if (!enable_pml)
+		exec_control &= ~SECONDARY_EXEC_ENABLE_PML;
 
 	/* Currently, we allow L1 guest to directly run pcommit instruction. */
 	exec_control &= ~SECONDARY_EXEC_PCOMMIT;
@@ -7804,7 +7805,7 @@ static void vmx_get_exit_info(struct kvm_vcpu *vcpu, u64 *info1, u64 *info2)
 	*info2 = vmcs_read32(VM_EXIT_INTR_INFO);
 }
 
-static int vmx_enable_pml(struct vcpu_vmx *vmx)
+static int vmx_create_pml_buffer(struct vcpu_vmx *vmx)
 {
 	struct page *pml_pg;
 
@@ -7817,12 +7818,10 @@ static int vmx_enable_pml(struct vcpu_vmx *vmx)
 	vmcs_write64(PML_ADDRESS, page_to_phys(vmx->pml_pg));
 	vmcs_write16(GUEST_PML_INDEX, PML_ENTITY_NUM - 1);
 
-	vmcs_set_bits(SECONDARY_VM_EXEC_CONTROL, SECONDARY_EXEC_ENABLE_PML);
-
 	return 0;
 }
 
-static void vmx_disable_pml(struct vcpu_vmx *vmx)
+static void vmx_destroy_pml_buffer(struct vcpu_vmx *vmx)
 {
 	ASSERT(vmx->pml_pg);
 	__free_page(vmx->pml_pg);
@@ -8706,7 +8705,7 @@ static void vmx_free_vcpu(struct kvm_vcpu *vcpu)
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
 	if (enable_pml)
-		vmx_disable_pml(vmx);
+		vmx_destroy_pml_buffer(vmx);
 	free_vpid(vmx->vpid);
 	leave_guest_mode(vcpu);
 	vmx_load_vmcs01(vcpu);
@@ -8790,7 +8789,7 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
 	 * for the guest, etc.
 	 */
 	if (enable_pml) {
-		err = vmx_enable_pml(vmx);
+		err = vmx_create_pml_buffer(vmx);
 		if (err)
 			goto free_vmcs;
 	}
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux