Check the numbers of cycles per instruction (CPI) implied by ARM PMU
cycle counter values. Check that in -icount mode these strictly
match the specified rate.
Signed-off-by: Christopher Covington <cov@xxxxxxxxxxxxxx>
---
arm/pmu.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++++++++++-
arm/unittests.cfg | 13 ++++++++++
2 files changed, 84 insertions(+), 1 deletion(-)
diff --git a/arm/pmu.c b/arm/pmu.c
index 589e605..0ad113d 100644
--- a/arm/pmu.c
+++ b/arm/pmu.c
@@ -84,12 +84,82 @@ static bool check_cycles_increase(void)
return true;
}
-int main(void)
+/* Execute a known number of guest instructions. Only odd instruction counts
+ * greater than or equal to 3 are supported by the in-line assembly code. The
+ * control register (PMCR_EL0) is initialized with the provided value (allowing
+ * for example for the cycle counter or event counters to be reset). At the end
+ * of the exact instruction loop, zero is written to PMCR_EL0 to disable
+ * counting, allowing the cycle counter or event counters to be read at the
+ * leisure of the calling code.
+ */
+static void measure_instrs(int num, struct pmu_data pmcr)
+{
+ int i = (num - 1) / 2;
+
+ if (num < 3 || ((num - 1) % 2))
+ abort();
+
+ asm volatile(
+ "msr pmcr_el0, %[pmcr]\n"
+ "1: subs %[i], %[i], #1\n"
+ "b.gt 1b\n"
+ "msr pmcr_el0, xzr"
+ : [i] "+r" (i) : [pmcr] "r" (pmcr) : "cc");
+}
+
+/* Measure cycle counts for various known instruction counts. Ensure that the
+ * cycle counter progresses (similar to check_cycles_increase() but with more
+ * instructions and using reset and stop controls). If supplied a positive,
+ * nonzero CPI parameter, also strictly check that every measurement matches
+ * it. Strict CPI checking is used to test -icount mode.
+ */
+static bool check_cpi(int cpi)
+{
+ struct pmu_data pmcr;
+
+ pmcr.cycle_counter_reset = 1;
+ pmcr.enable = 1;
+
+ if (cpi > 0)
+ printf("Checking for CPI=%d.\n", cpi);
+ printf("instrs : cycles0 cycles1 ...\n");
+
+ for (int i = 3; i < 300; i += 32) {
+ int avg, sum = 0;
+
+ printf("%d :", i);
+ for (int j = 0; j < samples; j++) {
+ int cycles;
+
+ measure_instrs(i, pmcr);
+ asm volatile("mrs %0, pmccntr_el0" : "=r" (cycles));
+ printf(" %d", cycles);
+
+ if (!cycles || (cpi > 0 && cycles != i * cpi)) {
+ printf("\n");
+ return false;
+ }
+
+ sum += cycles;
+ }
+ avg = sum / samples;
+ printf(" sum=%d avg=%d avg_ipc=%d avg_cpi=%d\n",
+ sum, avg, i / avg, avg / i);
+ }
+
+ return true;
+}
+
+int main(int argc, char *argv[])
{
report_prefix_push("pmu");
report("Control register", check_pmcr());
report("Monotonically increasing cycle count", check_cycles_increase());
+ int cpi = (argc == 1 ? atol(argv[0]) : 0);
+
+ report("Cycle/instruction ratio", check_cpi(cpi));
+
return report_summary();
}
diff --git a/arm/unittests.cfg b/arm/unittests.cfg
index fd94adb..333ee0d 100644
--- a/arm/unittests.cfg
+++ b/arm/unittests.cfg
@@ -39,4 +39,17 @@ groups = selftest
# Test PMU support without -icount
[pmu]
file = pmu.flat
+extra_params = -append '-1'
+groups = pmu
+
+# Test PMU support with -icount IPC=1
+[pmu-icount-1]
+file = pmu.flat
+extra_params = -icount 0 -append '1'
+groups = pmu
+
+# Test PMU support with -icount IPC=256
+[pmu-icount-256]
+file = pmu.flat
+extra_params = -icount 8 -append '256'
groups = pmu
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
