Hi Paolo & Alex,
I find that there is a build error in the following two cases:
- KVM is configured as 'M' and VFIO as 'Y'
The reason is the build of irqbypass manager is triggered in
arch/x86/kvm/Makefile, and VFIO is built before KVM, hence
it cannot find the symbols in irqbypass manager.
- Disable KVM and enable VFIO in .config
The reason is similar with the above one, the irqbypass manager
is not built since KVM is not configured.
I think the point is that we cannot trigger the build of irqbypass
manager inside KVM or VFIO, we need trigger the build at a high
level and it should be built before VFIO and KVM. Any ideas?
Thanks,
Feng
> -----Original Message-----
> From: Wu, Feng
> Sent: Friday, September 18, 2015 10:30 PM
> To: pbonzini@xxxxxxxxxx; alex.williamson@xxxxxxxxxx; joro@xxxxxxxxxx;
> mtosatti@xxxxxxxxxx
> Cc: eric.auger@xxxxxxxxxx; kvm@xxxxxxxxxxxxxxx;
> iommu@xxxxxxxxxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Wu, Feng
> Subject: [PATCH v9 12/18] vfio: Register/unregister irq_bypass_producer
>
> This patch adds the registration/unregistration of an
> irq_bypass_producer for MSI/MSIx on vfio pci devices.
>
> Signed-off-by: Feng Wu <feng.wu@xxxxxxxxx>
> ---
> v8:
> - Merge "[PATCH v7 08/17] vfio: Select IRQ_BYPASS_MANAGER for vfio PCI
> devices"
> into this patch.
>
> v6:
> - Make the add_consumer and del_consumer callbacks static
> - Remove pointless INIT_LIST_HEAD to 'vdev->ctx[vector].producer.node)'
> - Use dev_info instead of WARN_ON() when irq_bypass_register_producer fails
> - Remove optional dummy callbacks for irq producer
>
> drivers/vfio/pci/Kconfig | 1 +
> drivers/vfio/pci/vfio_pci_intrs.c | 9 +++++++++
> drivers/vfio/pci/vfio_pci_private.h | 2 ++
> 3 files changed, 12 insertions(+)
>
> diff --git a/drivers/vfio/pci/Kconfig b/drivers/vfio/pci/Kconfig
> index 579d83b..02912f1 100644
> --- a/drivers/vfio/pci/Kconfig
> +++ b/drivers/vfio/pci/Kconfig
> @@ -2,6 +2,7 @@ config VFIO_PCI
> tristate "VFIO support for PCI devices"
> depends on VFIO && PCI && EVENTFD
> select VFIO_VIRQFD
> + select IRQ_BYPASS_MANAGER
> help
> Support for the PCI VFIO bus driver. This is required to make
> use of PCI drivers using the VFIO framework.
> diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
> index 1f577b4..c65299d 100644
> --- a/drivers/vfio/pci/vfio_pci_intrs.c
> +++ b/drivers/vfio/pci/vfio_pci_intrs.c
> @@ -319,6 +319,7 @@ static int vfio_msi_set_vector_signal(struct
> vfio_pci_device *vdev,
>
> if (vdev->ctx[vector].trigger) {
> free_irq(irq, vdev->ctx[vector].trigger);
> + irq_bypass_unregister_producer(&vdev->ctx[vector].producer);
> kfree(vdev->ctx[vector].name);
> eventfd_ctx_put(vdev->ctx[vector].trigger);
> vdev->ctx[vector].trigger = NULL;
> @@ -360,6 +361,14 @@ static int vfio_msi_set_vector_signal(struct
> vfio_pci_device *vdev,
> return ret;
> }
>
> + vdev->ctx[vector].producer.token = trigger;
> + vdev->ctx[vector].producer.irq = irq;
> + ret = irq_bypass_register_producer(&vdev->ctx[vector].producer);
> + if (unlikely(ret))
> + dev_info(&pdev->dev,
> + "irq bypass producer (token %p) registeration fails: %d\n",
> + vdev->ctx[vector].producer.token, ret);
> +
> vdev->ctx[vector].trigger = trigger;
>
> return 0;
> diff --git a/drivers/vfio/pci/vfio_pci_private.h
> b/drivers/vfio/pci/vfio_pci_private.h
> index ae0e1b4..0e7394f 100644
> --- a/drivers/vfio/pci/vfio_pci_private.h
> +++ b/drivers/vfio/pci/vfio_pci_private.h
> @@ -13,6 +13,7 @@
>
> #include <linux/mutex.h>
> #include <linux/pci.h>
> +#include <linux/irqbypass.h>
>
> #ifndef VFIO_PCI_PRIVATE_H
> #define VFIO_PCI_PRIVATE_H
> @@ -29,6 +30,7 @@ struct vfio_pci_irq_ctx {
> struct virqfd *mask;
> char *name;
> bool masked;
> + struct irq_bypass_producer producer;
> };
>
> struct vfio_pci_device {
> --
> 2.1.0
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
