On June 30, 2015 5:20:20 PM GMT+08:00, Christoffer Dall <christoffer.dall@xxxxxxxxxx> wrote:
>On Mon, Jun 22, 2015 at 06:41:31PM +0800, Zhichao Huang wrote:
>> The trapping code keeps track of the state of the debug registers,
>> allowing for the switch code to implement a lazy switching strategy.
>>
>> Signed-off-by: Zhichao Huang <zhichao.huang@xxxxxxxxxx>
>> ---
>> arch/arm/include/asm/kvm_asm.h | 3 +++
>> arch/arm/include/asm/kvm_host.h | 3 +++
>> arch/arm/kernel/asm-offsets.c | 1 +
>> arch/arm/kvm/coproc.c | 39 ++++++++++++++++++++++++++++++++++++--
>> arch/arm/kvm/interrupts_head.S | 42
>+++++++++++++++++++++++++++++++++++++++++
>> 5 files changed, 86 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h
>> index ba65e05..4fb64cf 100644
>> --- a/arch/arm/include/asm/kvm_asm.h
>> +++ b/arch/arm/include/asm/kvm_asm.h
>> @@ -64,6 +64,9 @@
>> #define cp14_DBGDSCRext 65 /* Debug Status and Control external */
>> #define NR_CP14_REGS 66 /* Number of regs (incl. invalid) */
>>
>> +#define KVM_ARM_DEBUG_DIRTY_SHIFT 0
>> +#define KVM_ARM_DEBUG_DIRTY (1 << KVM_ARM_DEBUG_DIRTY_SHIFT)
>> +
>> #define ARM_EXCEPTION_RESET 0
>> #define ARM_EXCEPTION_UNDEFINED 1
>> #define ARM_EXCEPTION_SOFTWARE 2
>> diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
>> index 3d16820..09b54bf 100644
>> --- a/arch/arm/include/asm/kvm_host.h
>> +++ b/arch/arm/include/asm/kvm_host.h
>> @@ -127,6 +127,9 @@ struct kvm_vcpu_arch {
>> /* System control coprocessor (cp14) */
>> u32 cp14[NR_CP14_REGS];
>>
>> + /* Debug state */
>> + u32 debug_flags;
>> +
>> /*
>> * Anything that is not used directly from assembly code goes
>> * here.
>> diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
>> index 9158de0..e876109 100644
>> --- a/arch/arm/kernel/asm-offsets.c
>> +++ b/arch/arm/kernel/asm-offsets.c
>> @@ -185,6 +185,7 @@ int main(void)
>> DEFINE(VCPU_FIQ_REGS, offsetof(struct kvm_vcpu,
>arch.regs.fiq_regs));
>> DEFINE(VCPU_PC, offsetof(struct kvm_vcpu,
>arch.regs.usr_regs.ARM_pc));
>> DEFINE(VCPU_CPSR, offsetof(struct kvm_vcpu,
>arch.regs.usr_regs.ARM_cpsr));
>> + DEFINE(VCPU_DEBUG_FLAGS, offsetof(struct kvm_vcpu,
>arch.debug_flags));
>> DEFINE(VCPU_HCR, offsetof(struct kvm_vcpu, arch.hcr));
>> DEFINE(VCPU_IRQ_LINES, offsetof(struct kvm_vcpu, arch.irq_lines));
>> DEFINE(VCPU_HSR, offsetof(struct kvm_vcpu, arch.fault.hsr));
>> diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c
>> index eeee648..fc0c2ef 100644
>> --- a/arch/arm/kvm/coproc.c
>> +++ b/arch/arm/kvm/coproc.c
>> @@ -220,14 +220,49 @@ bool access_vm_reg(struct kvm_vcpu *vcpu,
>> return true;
>> }
>>
>> +/*
>> + * We want to avoid world-switching all the DBG registers all the
>> + * time:
>> + *
>> + * - If we've touched any debug register, it is likely that we're
>> + * going to touch more of them. It then makes sense to disable the
>> + * traps and start doing the save/restore dance
>> + * - If debug is active (ARM_DSCR_MDBGEN set), it is then mandatory
>> + * to save/restore the registers, as the guest depends on them.
>> + *
>> + * For this, we use a DIRTY bit, indicating the guest has modified
>the
>> + * debug registers, used as follow:
>> + *
>> + * On guest entry:
>> + * - If the dirty bit is set (because we're coming back from
>trapping),
>> + * disable the traps, save host registers, restore guest
>registers.
>> + * - If debug is actively in use (ARM_DSCR_MDBGEN set),
>> + * set the dirty bit, disable the traps, save host registers,
>> + * restore guest registers.
>> + * - Otherwise, enable the traps
>> + *
>> + * On guest exit:
>> + * - If the dirty bit is set, save guest registers, restore host
>> + * registers and clear the dirty bit. This ensure that the host can
>> + * now use the debug registers.
>> + *
>> + * Notice:
>> + * - For ARMv7, if the CONFIG_HAVE_HW_BREAKPOINT is set in the guest,
>> + * debug is always actively in use (ARM_DSCR_MDBGEN set).
>> + * We have to do the save/restore dance in this case, because the
>> + * host and the guest might use their respective debug registers
>> + * at any moment.
>
>so doesn't this pretty much invalidate the whole saving/dirty effort?
>
>Guests configured from for example multi_v7_defconfig will then act
>like
>this and you will save/restore all these registers always.
>
>Wouldn't a better approach be to enable trapping to hyp mode most of
>the
>time, and simply clear the enabled bit of any host-used break- or
>wathcpoints upon guest entry, perhaps maintaining a bitmap of which
>ones
>must be re-set when exiting the guest, and thereby drastically reducing
>the amount of save/restore code you'd have to perform.
>
>Of course, you'd also have to keep track of whether the guest has any
>breakpoints or watchpoints enabled for when you do the full
>save/restore
>dance.
>
>That would also avoid all issues surrounding accesses to DBGDSCRext
>register I think.
I have thought about it, which means to say, "Since we can't find
whether the guest has any hwbrpts enabled from the DBGDSCR, why
don't we find it from the DBGBCR and DBGWCR?".
Case 1: The host and the guest enable all the hwbrpts.
It's necessary to world switch the debug registers all the time.
Case 2: The host and the guest enable some of the hwbrpts.
It's necessary to world switch the debug registers which are enabled.
But if we want skip thouse registers which aren't enabled, we have to
keep track of all the debug states both in the host and the guest.
We need to judge which debug registers we should switch, and which
not. It may bring in a complex logic in the assembly code. And if the
host or guest enabled almost all of the hwbrpts, this operation may
bring in the loss outweights the grain.
Is it acceptable and worthy? If yes, I will do it.
Case 3: Neither the host nor the guest enable any hwbrpts.
It's the case that we can skip the whole world switch thing.
The only problem is that we have to read all the debug registers on each
guest entry to find whether the host enable any hwbrpts or not.
But this case is a normal case, which is worthy to do the efforts to
reduce the saving/restoring overhead.
>
>> + */
>> static bool trap_debug32(struct kvm_vcpu *vcpu,
>> const struct coproc_params *p,
>> const struct coproc_reg *r)
>> {
>> - if (p->is_write)
>> + if (p->is_write) {
>> vcpu->arch.cp14[r->reg] = *vcpu_reg(vcpu, p->Rt1);
>> - else
>> + vcpu->arch.debug_flags |= KVM_ARM_DEBUG_DIRTY;
>> + } else {
>> *vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp14[r->reg];
>> + }
>>
>> return true;
>> }
>> diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S
>> index a20b9ad..5662c39 100644
>> --- a/arch/arm/kvm/interrupts_head.S
>> +++ b/arch/arm/kvm/interrupts_head.S
>> @@ -1,4 +1,6 @@
>> #include <linux/irqchip/arm-gic.h>
>> +#include <asm/hw_breakpoint.h>
>> +#include <asm/kvm_asm.h>
>> #include <asm/assembler.h>
>>
>> #define VCPU_USR_REG(_reg_nr) (VCPU_USR_REGS + (_reg_nr * 4))
>> @@ -407,6 +409,46 @@ vcpu .req r0 @ vcpu pointer always in r0
>> mcr p15, 2, r12, c0, c0, 0 @ CSSELR
>> .endm
>>
>> +/* Assume vcpu pointer in vcpu reg, clobbers r5 */
>> +.macro skip_debug_state target
>> + ldr r5, [vcpu, #VCPU_DEBUG_FLAGS]
>> + cmp r5, #KVM_ARM_DEBUG_DIRTY
>> + bne \target
>> +1:
>> +.endm
>> +
>> +/* Compute debug state: If ARM_DSCR_MDBGEN or KVM_ARM_DEBUG_DIRTY
>> + * is set, we do a full save/restore cycle and disable trapping.
>> + *
>> + * Assumes vcpu pointer in vcpu reg
>> + *
>> + * Clobbers r5, r6
>> + */
>> +.macro compute_debug_state target
>> + // Check the state of MDSCR_EL1
>> + ldr r5, [vcpu, #CP14_OFFSET(cp14_DBGDSCRext)]
>> + and r6, r5, #ARM_DSCR_MDBGEN
>> + cmp r6, #0
>
>you can just do 'ands' here, or even tst and you don't have to touch
>r6.
OK. Thanks for pointing out.
>
>> + beq 9998f // Nothing to see there
>> +
>> + // If ARM_DSCR_MDBGEN bit was set, we must set the flag
>> + mov r5, #KVM_ARM_DEBUG_DIRTY
>> + str r5, [vcpu, #VCPU_DEBUG_FLAGS]
>> + b 9999f // Don't skip restore
>> +
>> +9998:
>> + // Otherwise load the flags from memory in case we recently
>> + // trapped
>> + skip_debug_state \target
>> +9999:
>> +.endm
>> +
>> +/* Assume vcpu pointer in vcpu reg, clobbers r5 */
>> +.macro clear_debug_dirty_bit
>> + mov r5, #0
>> + str r5, [vcpu, #VCPU_DEBUG_FLAGS]
>> +.endm
>> +
>> /*
>> * Save the VGIC CPU state into memory
>> *
>> --
>> 1.7.12.4
>>
>Thanks,
>-Christoffer
--
Zhichao Huang
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
