On Fri, Jun 19, 2015 at 01:23:48PM +0100, Alex Bennée wrote:
> This adds support for userspace to control the HW debug registers for
> guest debug. In the debug ioctl we copy the IMPDEF defined number of
s/defined//
> registers into a new register set called host_debug_state. There is now
> a new vcpu parameter called debug_ptr which selects which register set
> is to copied into the real registers when world switch occurs.
But this patch doesn't seem to add the debug_ptr field?
s/to//
>
> I've moved some helper functions into the hw_breakpoint.h header for
> re-use.
>
> As with single step we need to tweak the guest registers to enable the
> exceptions so we need to save and restore those bits.
>
> Two new capabilities have been added to the KVM_EXTENSION ioctl to allow
> userspace to query the number of hardware break and watch points
> available on the host hardware.
>
> Signed-off-by: Alex Bennée <alex.bennee@xxxxxxxxxx>
>
> ---
> v2
> - switched to C setup
> - replace host debug registers directly into context
> - minor tweak to api docs
> - setup right register for debug
> - add FAR_EL2 to debug exit structure
> - add support for trapping debug register access
> v3
> - remove stray trace statement
> - fix spacing around operators (various)
> - clean-up usage of trap_debug
> - introduce debug_ptr, replace excessive memcpy stuff
> - don't use memcpy in ioctl, just assign
> - update cap ioctl documentation
> - reword a number comments
> - rename host_debug_state->external_debug_state
> v4
> - use the new u32/u64 split debug_ptr approach
> - fix some wording/comments
> v5
> - don't set MDSCR_EL1.KDE (not needed)
> v6
> - update wording given change in commentary
> - KVM_GUESTDBG_USE_HW_BP->KVM_GUESTDBG_USE_HW
> ---
> Documentation/virtual/kvm/api.txt | 7 ++++++-
> arch/arm/kvm/arm.c | 7 +++++++
> arch/arm64/include/asm/hw_breakpoint.h | 12 +++++++++++
> arch/arm64/include/asm/kvm_host.h | 6 +++++-
> arch/arm64/kernel/hw_breakpoint.c | 12 -----------
> arch/arm64/kvm/debug.c | 37 +++++++++++++++++++++++++++++-----
> arch/arm64/kvm/handle_exit.c | 6 ++++++
> arch/arm64/kvm/reset.c | 12 +++++++++++
> include/uapi/linux/kvm.h | 2 ++
> 9 files changed, 82 insertions(+), 19 deletions(-)
>
> diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
> index 33c8143..ada57df 100644
> --- a/Documentation/virtual/kvm/api.txt
> +++ b/Documentation/virtual/kvm/api.txt
> @@ -2668,7 +2668,7 @@ The top 16 bits of the control field are architecture specific control
> flags which can include the following:
>
> - KVM_GUESTDBG_USE_SW_BP: using software breakpoints [x86, arm64]
> - - KVM_GUESTDBG_USE_HW_BP: using hardware breakpoints [x86, s390]
> + - KVM_GUESTDBG_USE_HW_BP: using hardware breakpoints [x86, s390, arm64]
> - KVM_GUESTDBG_INJECT_DB: inject DB type exception [x86]
> - KVM_GUESTDBG_INJECT_BP: inject BP type exception [x86]
> - KVM_GUESTDBG_EXIT_PENDING: trigger an immediate guest exit [s390]
> @@ -2683,6 +2683,11 @@ updated to the correct (supplied) values.
> The second part of the structure is architecture specific and
> typically contains a set of debug registers.
>
> +For arm64 the number of debug registers is implementation defined and
> +can be determined by querying the KVM_CAP_GUEST_DEBUG_HW_BPS and
> +KVM_CAP_GUEST_DEBUG_HW_WPS capabilities which return a positive number
> +indicating the number of supported registers.
> +
> When debug events exit the main run loop with the reason
> KVM_EXIT_DEBUG with the kvm_debug_exit_arch part of the kvm_run
> structure containing architecture specific debug information.
> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
> index 0d17c7b..60c4045 100644
> --- a/arch/arm/kvm/arm.c
> +++ b/arch/arm/kvm/arm.c
> @@ -307,6 +307,7 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
>
> #define KVM_GUESTDBG_VALID_MASK (KVM_GUESTDBG_ENABLE | \
> KVM_GUESTDBG_USE_SW_BP | \
> + KVM_GUESTDBG_USE_HW | \
> KVM_GUESTDBG_SINGLESTEP)
>
> /**
> @@ -327,6 +328,12 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
>
> if (dbg->control & KVM_GUESTDBG_ENABLE) {
> vcpu->guest_debug = dbg->control;
> +
> + /* Hardware assisted Break and Watch points */
> + if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW) {
> + vcpu->arch.external_debug_state = dbg->arch;
> + }
> +
> } else {
> /* If not enabled clear all flags */
> vcpu->guest_debug = 0;
> diff --git a/arch/arm64/include/asm/hw_breakpoint.h b/arch/arm64/include/asm/hw_breakpoint.h
> index 52b484b..c450552 100644
> --- a/arch/arm64/include/asm/hw_breakpoint.h
> +++ b/arch/arm64/include/asm/hw_breakpoint.h
> @@ -130,6 +130,18 @@ static inline void ptrace_hw_copy_thread(struct task_struct *task)
> }
> #endif
>
> +/* Determine number of BRP registers available. */
> +static inline int get_num_brps(void)
> +{
> + return ((read_cpuid(ID_AA64DFR0_EL1) >> 12) & 0xf) + 1;
> +}
> +
> +/* Determine number of WRP registers available. */
> +static inline int get_num_wrps(void)
> +{
> + return ((read_cpuid(ID_AA64DFR0_EL1) >> 20) & 0xf) + 1;
> +}
> +
> extern struct pmu perf_ops_bp;
>
> #endif /* __KERNEL__ */
> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> index 9697daf..0a3ee7b 100644
> --- a/arch/arm64/include/asm/kvm_host.h
> +++ b/arch/arm64/include/asm/kvm_host.h
> @@ -116,13 +116,17 @@ struct kvm_vcpu_arch {
> * debugging the guest from the host and to maintain separate host and
> * guest state during world switches. vcpu_debug_state are the debug
> * registers of the vcpu as the guest sees them. host_debug_state are
> - * the host registers which are saved and restored during world switches.
> + * the host registers which are saved and restored during
> + * world switches. external_debug_state contains the debug
> + * values we want to debugging the guest. This is set via the
nit: s/debugging/debug/
> + * KVM_SET_GUEST_DEBUG ioctl.
> *
> * debug_ptr points to the set of debug registers that should be loaded
> * onto the hardware when running the guest.
> */
> struct kvm_guest_debug_arch *debug_ptr;
> struct kvm_guest_debug_arch vcpu_debug_state;
> + struct kvm_guest_debug_arch external_debug_state;
>
> /* Pointer to host CPU context */
> kvm_cpu_context_t *host_cpu_context;
> diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c
> index e7d934d..3a41bbf 100644
> --- a/arch/arm64/kernel/hw_breakpoint.c
> +++ b/arch/arm64/kernel/hw_breakpoint.c
> @@ -49,18 +49,6 @@ static DEFINE_PER_CPU(int, stepping_kernel_bp);
> static int core_num_brps;
> static int core_num_wrps;
>
> -/* Determine number of BRP registers available. */
> -static int get_num_brps(void)
> -{
> - return ((read_cpuid(ID_AA64DFR0_EL1) >> 12) & 0xf) + 1;
> -}
> -
> -/* Determine number of WRP registers available. */
> -static int get_num_wrps(void)
> -{
> - return ((read_cpuid(ID_AA64DFR0_EL1) >> 20) & 0xf) + 1;
> -}
> -
> int hw_breakpoint_slots(int type)
> {
> /*
> diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c
> index d439eb8..b287bbc 100644
> --- a/arch/arm64/kvm/debug.c
> +++ b/arch/arm64/kvm/debug.c
> @@ -96,10 +96,6 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
> MDCR_EL2_TDRA |
> MDCR_EL2_TDOSA);
>
> - /* Trap on access to debug registers? */
> - if (trap_debug)
> - vcpu->arch.mdcr_el2 |= MDCR_EL2_TDA;
> -
> /* Is Guest debugging in effect? */
> if (vcpu->guest_debug) {
> /* Route all software debug exceptions to EL2 */
> @@ -134,11 +130,42 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
> } else {
> vcpu_sys_reg(vcpu, MDSCR_EL1) &= ~DBG_MDSCR_SS;
> }
> +
> + /*
> + * HW Breakpoints and watchpoints
> + *
> + * We simply switch the debug_ptr to point to our new
> + * external_debug_state which has been populated by the
> + * debug ioctl. The existing KVM_ARM64_DEBUG_DIRTY
> + * mechanism ensures the registers are updated on the
> + * world switch.
> + */
> + if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW) {
> + /* Enable breakpoints/watchpoints */
> + vcpu_sys_reg(vcpu, MDSCR_EL1) |= DBG_MDSCR_MDE;
> +
> + vcpu->arch.debug_ptr = &vcpu->arch.external_debug_state;
> + vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
> + trap_debug = true;
> + }
> }
> +
> + /* Trap debug register access */
> + if (trap_debug)
> + vcpu->arch.mdcr_el2 |= MDCR_EL2_TDA;
> }
>
> void kvm_arm_clear_debug(struct kvm_vcpu *vcpu)
> {
> - if (vcpu->guest_debug)
> + if (vcpu->guest_debug) {
> restore_guest_debug_regs(vcpu);
> +
> + /*
> + * If we were using HW debug we need to restore the
> + * debug_ptr to the guest debug state.
> + */
> + if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW)
> + vcpu->arch.debug_ptr = &vcpu->arch.vcpu_debug_state;
I still think this would be more cleanly done in the setup_debug
function, but ok:
Reviewed-by: Christoffer Dall <christoffer.dall@xxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
