Re: [PATCH V1 4/5] kvm: arm64: Implement ACPI probing code for GICv2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 28, 2015 at 01:34:33AM -0400, Wei Huang wrote:
> This patches enables ACPI support for KVM virtual GICv2. KVM parses
> ACPI table for virt GIC related information and initializes resources.
> 
> Signed-off-by: Alexander Spyridaki <a.spyridakis@xxxxxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Wei Huang <wei@xxxxxxxxxx>
> ---
>  virt/kvm/arm/vgic-v2.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 48 insertions(+), 1 deletion(-)
> 
> diff --git a/virt/kvm/arm/vgic-v2.c b/virt/kvm/arm/vgic-v2.c
> index 711de82..01ce8a3 100644
> --- a/virt/kvm/arm/vgic-v2.c
> +++ b/virt/kvm/arm/vgic-v2.c
> @@ -264,6 +264,53 @@ int vgic_v2_acpi_probe(struct acpi_madt_generic_interrupt *vgic_acpi,
>  		       const struct vgic_ops **ops,
>  		       const struct vgic_params **params)
>  {
> -	return -EINVAL;
> +	struct vgic_params *vgic = &vgic_v2_params;
> +	int irq_mode, ret;
> +
> +	/* IRQ trigger mode */
> +	irq_mode = (vgic_acpi->flags & ACPI_MADT_VGIC_IRQ_MODE) ?
> +		ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
> +	vgic->maint_irq = acpi_register_gsi(NULL, vgic_acpi->vgic_interrupt,
> +					    irq_mode, ACPI_ACTIVE_HIGH);
> +	if (!vgic->maint_irq) {
> +		kvm_err("Cannot register VGIC ACPI maintenance irq\n");
> +		ret = -ENXIO;
> +		goto out;
> +	}
> +
> +	/* GICH resource */
> +	vgic->vctrl_base = ioremap(vgic_acpi->gich_base_address, SZ_8K);
> +	if (!vgic->vctrl_base) {
> +		kvm_err("cannot ioremap GICH memory\n");
> +		ret = -ENOMEM;
> +		goto out;
> +	}
> +
> +	vgic->nr_lr = readl_relaxed(vgic->vctrl_base + GICH_VTR);
> +	vgic->nr_lr = (vgic->nr_lr & 0x3f) + 1;
> +
> +	ret = create_hyp_io_mappings(vgic->vctrl_base,
> +				     vgic->vctrl_base + SZ_8K,
> +				     vgic_acpi->gich_base_address);
> +	if (ret) {
> +		kvm_err("Cannot map GICH into hyp\n");
> +		goto out;
> +	}
> +
> +	vgic->vcpu_base = vgic_acpi->gicv_base_address;
> +	vgic->can_emulate_gicv2 = true;
> +	kvm_register_device_ops(&kvm_arm_vgic_v2_ops, KVM_DEV_TYPE_ARM_VGIC_V2);
> +
> +	kvm_info("GICH base=0x%llx, GICV base=0x%llx, IRQ=%d\n",
> +		 (unsigned long long)vgic_acpi->gich_base_address,
> +		 (unsigned long long)vgic_acpi->gicv_base_address,
> +		 vgic->maint_irq);
> +
> +	vgic->type = VGIC_V2;

we're missing max_gic_vcpus here

	vgic->max_gic_vcpus = VGIC_V2_MAX_CPUS;

> +	*ops = &vgic_v2_ops;
> +	*params = vgic;
> +
> +out:
> +	return ret;
>  }
>  #endif /* CONFIG_ACPI */
> -- 
> 1.8.3.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux