The patch adds one more EEH sub-command (VFIO_EEH_PE_INJECT_ERR)
to inject the specified EEH error, which is represented by
(struct vfio_eeh_pe_err), to the indicated PE for testing purpose.
Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
---
Documentation/vfio.txt | 12 ++++++++++++
drivers/vfio/vfio_spapr_eeh.c | 10 ++++++++++
include/uapi/linux/vfio.h | 36 +++++++++++++++++++++++++++++++++++-
3 files changed, 57 insertions(+), 1 deletion(-)
diff --git a/Documentation/vfio.txt b/Documentation/vfio.txt
index 96978ec..c6e11a3 100644
--- a/Documentation/vfio.txt
+++ b/Documentation/vfio.txt
@@ -385,6 +385,18 @@ The code flow from the example above should be slightly changed:
....
+ /* Inject EEH error, which is expected to be caused by 32-bits
+ * config load.
+ */
+ pe_op.op = VFIO_EEH_PE_INJECT_ERR;
+ pe_op.err.type = VFIO_EEH_ERR_TYPE_32;
+ pe_op.err.func = VFIO_EEH_ERR_FUNC_LD_CFG_ADDR;
+ pe_op.err.addr = 0ul;
+ pe_op.err.mask = 0ul;
+ ioctl(container, VFIO_EEH_PE_OP, &pe_op);
+
+ ....
+
/* When 0xFF's returned from reading PCI config space or IO BARs
* of the PCI device. Check the PE's state to see if that has been
* frozen.
diff --git a/drivers/vfio/vfio_spapr_eeh.c b/drivers/vfio/vfio_spapr_eeh.c
index 5fa42db..38edeb4 100644
--- a/drivers/vfio/vfio_spapr_eeh.c
+++ b/drivers/vfio/vfio_spapr_eeh.c
@@ -85,6 +85,16 @@ long vfio_spapr_iommu_eeh_ioctl(struct iommu_group *group,
case VFIO_EEH_PE_CONFIGURE:
ret = eeh_pe_configure(pe);
break;
+ case VFIO_EEH_PE_INJECT_ERR:
+ minsz = offsetofend(struct vfio_eeh_pe_op, err.mask);
+ if (op.argsz < minsz)
+ return -EINVAL;
+ if (copy_from_user(&op, (void __user *)arg, minsz))
+ return -EFAULT;
+
+ ret = eeh_pe_inject_err(pe, op.err.type, op.err.func,
+ op.err.addr, op.err.mask);
+ break;
default:
ret = -EINVAL;
}
diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
index 82889c3..f68e962 100644
--- a/include/uapi/linux/vfio.h
+++ b/include/uapi/linux/vfio.h
@@ -468,12 +468,23 @@ struct vfio_iommu_spapr_tce_info {
* - unfreeze IO/DMA for frozen PE;
* - read PE state;
* - reset PE;
- * - configure PE.
+ * - configure PE;
+ * - inject EEH error.
*/
+struct vfio_eeh_pe_err {
+ __u32 type;
+ __u32 func;
+ __u64 addr;
+ __u64 mask;
+};
+
struct vfio_eeh_pe_op {
__u32 argsz;
__u32 flags;
__u32 op;
+ union {
+ struct vfio_eeh_pe_err err;
+ };
};
#define VFIO_EEH_PE_DISABLE 0 /* Disable EEH functionality */
@@ -490,6 +501,29 @@ struct vfio_eeh_pe_op {
#define VFIO_EEH_PE_RESET_HOT 6 /* Assert hot reset */
#define VFIO_EEH_PE_RESET_FUNDAMENTAL 7 /* Assert fundamental reset */
#define VFIO_EEH_PE_CONFIGURE 8 /* PE configuration */
+#define VFIO_EEH_PE_INJECT_ERR 9 /* Inject EEH error */
+#define VFIO_EEH_ERR_TYPE_32 0 /* 32-bits EEH error type */
+#define VFIO_EEH_ERR_TYPE_64 1 /* 64-bits EEH error type */
+#define VFIO_EEH_ERR_FUNC_LD_MEM_ADDR 0 /* Memory load */
+#define VFIO_EEH_ERR_FUNC_LD_MEM_DATA 1
+#define VFIO_EEH_ERR_FUNC_LD_IO_ADDR 2 /* IO load */
+#define VFIO_EEH_ERR_FUNC_LD_IO_DATA 3
+#define VFIO_EEH_ERR_FUNC_LD_CFG_ADDR 4 /* Config load */
+#define VFIO_EEH_ERR_FUNC_LD_CFG_DATA 5
+#define VFIO_EEH_ERR_FUNC_ST_MEM_ADDR 6 /* Memory store */
+#define VFIO_EEH_ERR_FUNC_ST_MEM_DATA 7
+#define VFIO_EEH_ERR_FUNC_ST_IO_ADDR 8 /* IO store */
+#define VFIO_EEH_ERR_FUNC_ST_IO_DATA 9
+#define VFIO_EEH_ERR_FUNC_ST_CFG_ADDR 10 /* Config store */
+#define VFIO_EEH_ERR_FUNC_ST_CFG_DATA 11
+#define VFIO_EEH_ERR_FUNC_DMA_RD_ADDR 12 /* DMA read */
+#define VFIO_EEH_ERR_FUNC_DMA_RD_DATA 13
+#define VFIO_EEH_ERR_FUNC_DMA_RD_MASTER 14
+#define VFIO_EEH_ERR_FUNC_DMA_RD_TARGET 15
+#define VFIO_EEH_ERR_FUNC_DMA_WR_ADDR 16 /* DMA write */
+#define VFIO_EEH_ERR_FUNC_DMA_WR_DATA 17
+#define VFIO_EEH_ERR_FUNC_DMA_WR_MASTER 18
+#define VFIO_EEH_ERR_FUNC_DMA_WR_TARGET 19
#define VFIO_EEH_PE_OP _IO(VFIO_TYPE, VFIO_BASE + 21)
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
