The patch defines PCI error types and functions in eeh.h and
exports function eeh_pe_inject_err(), which will be called by
VFIO driver to inject the specified PCI error to the indicated
PE for testing purpose.
Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
---
v2: Use EEH_ERR_FUNC_{MIN,MAX} to validate PCI error function
---
arch/powerpc/include/asm/eeh.h | 26 ++++++++++++++++++++++++++
arch/powerpc/kernel/eeh.c | 40 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 66 insertions(+)
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 55abfd0..44366fa 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -195,6 +195,30 @@ enum {
#define EEH_RESET_FUNDAMENTAL 3 /* Fundamental reset */
#define EEH_LOG_TEMP 1 /* EEH temporary error log */
#define EEH_LOG_PERM 2 /* EEH permanent error log */
+#define EEH_ERR_TYPE_32 0 /* 32-bits PCI error */
+#define EEH_ERR_TYPE_64 1 /* 64-bits PCI error */
+#define EEH_ERR_FUNC_MIN 0
+#define EEH_ERR_FUNC_LD_MEM_ADDR 0 /* Memory load */
+#define EEH_ERR_FUNC_LD_MEM_DATA 1
+#define EEH_ERR_FUNC_LD_IO_ADDR 2 /* IO load */
+#define EEH_ERR_FUNC_LD_IO_DATA 3
+#define EEH_ERR_FUNC_LD_CFG_ADDR 4 /* Config load */
+#define EEH_ERR_FUNC_LD_CFG_DATA 5
+#define EEH_ERR_FUNC_ST_MEM_ADDR 6 /* Memory store */
+#define EEH_ERR_FUNC_ST_MEM_DATA 7
+#define EEH_ERR_FUNC_ST_IO_ADDR 8 /* IO store */
+#define EEH_ERR_FUNC_ST_IO_DATA 9
+#define EEH_ERR_FUNC_ST_CFG_ADDR 10 /* Config store */
+#define EEH_ERR_FUNC_ST_CFG_DATA 11
+#define EEH_ERR_FUNC_DMA_RD_ADDR 12 /* DMA read */
+#define EEH_ERR_FUNC_DMA_RD_DATA 13
+#define EEH_ERR_FUNC_DMA_RD_MASTER 14
+#define EEH_ERR_FUNC_DMA_RD_TARGET 15
+#define EEH_ERR_FUNC_DMA_WR_ADDR 16 /* DMA write */
+#define EEH_ERR_FUNC_DMA_WR_DATA 17
+#define EEH_ERR_FUNC_DMA_WR_MASTER 18
+#define EEH_ERR_FUNC_DMA_WR_TARGET 19
+#define EEH_ERR_FUNC_MAX 19
struct eeh_ops {
char *name;
@@ -295,6 +319,8 @@ int eeh_pe_set_option(struct eeh_pe *pe, int option);
int eeh_pe_get_state(struct eeh_pe *pe);
int eeh_pe_reset(struct eeh_pe *pe, int option);
int eeh_pe_configure(struct eeh_pe *pe);
+int eeh_pe_inject_err(struct eeh_pe *pe, int type, int func,
+ unsigned long addr, unsigned long mask);
/**
* EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 19a897c..55083e5 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -1651,6 +1651,46 @@ int eeh_pe_configure(struct eeh_pe *pe)
}
EXPORT_SYMBOL_GPL(eeh_pe_configure);
+/**
+ * eeh_pe_inject_err - Injecting the specified PCI error to the indicated PE
+ * @pe: the indicated PE
+ * @type: error type
+ * @function: error function
+ * @addr: address
+ * @mask: address mask
+ *
+ * The routine is called to inject the specified PCI error, which
+ * is determined by @type and @function, to the indicated PE for
+ * testing purpose.
+ */
+int eeh_pe_inject_err(struct eeh_pe *pe, int type, int func,
+ unsigned long addr, unsigned long mask)
+{
+ /* Invalid PE ? */
+ if (!pe)
+ return -ENODEV;
+
+ /* Unsupported operation ? */
+ if (!eeh_ops || !eeh_ops->err_inject)
+ return -ENOENT;
+
+ /* Check on PCI error type */
+ switch (type) {
+ case EEH_ERR_TYPE_32:
+ case EEH_ERR_TYPE_64:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Check on PCI error function */
+ if (func < EEH_ERR_FUNC_MIN || func > EEH_ERR_FUNC_MAX)
+ return -EINVAL;
+
+ return eeh_ops->err_inject(pe, type, func, addr, mask);
+}
+EXPORT_SYMBOL_GPL(eeh_pe_inject_err);
+
static int proc_eeh_show(struct seq_file *m, void *v)
{
if (!eeh_enabled()) {
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
