[PATCH RESEND v15 07/10] KVM: arm: page logging 2nd stage fault handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds support for 2nd stage page fault handling while dirty page
logging. On huge page faults, huge pages are dissolved to normal pages, and
rebuilding of 2nd stage huge pages is blocked. In case migration is 
canceled this restriction is removed and huge pages may be rebuilt again.

This patch applies cleanly on top of patch series posted Dec. 15'th:
https://lists.cs.columbia.edu/pipermail/kvmarm/2014-December/012826.html

Patch #11 has been dropped, and should not be applied.

Signed-off-by: Mario Smarduch <m.smarduch@xxxxxxxxxxx>
---

Change Log since last RESEND v1 --> v2:
- Disallow dirty page logging of IO region - fail for initial write protect
  and disable logging code in 2nd stage page fault handler.
- Fixed auto spell correction errors

Change Log RESEND v0 --> v1:
- fixed bug exposed by new generic __get_user_pages_fast(), when region is 
  writable, prevent write protection of pte on read fault
- Removed marking entire huge page dirty on initial access
- don't dissolve huge pages of non-writable regions
- Made updates based on Christoffers comments
  - renamed logging status function to memslot_is_logging()
  - changed few values to bool from longs
  - streamlined user_mem_abort() to eliminate extra conditional checks
---
 arch/arm/kvm/mmu.c |  113 ++++++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 105 insertions(+), 8 deletions(-)

diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
index 73d506f..b878236 100644
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -47,6 +47,18 @@ static phys_addr_t hyp_idmap_vector;
 #define kvm_pmd_huge(_x)	(pmd_huge(_x) || pmd_trans_huge(_x))
 #define kvm_pud_huge(_x)	pud_huge(_x)
 
+#define KVM_S2PTE_FLAG_IS_IOMAP		(1UL << 0)
+#define KVM_S2PTE_FLAG_LOGGING_ACTIVE	(1UL << 1)
+
+static bool memslot_is_logging(struct kvm_memory_slot *memslot)
+{
+#ifdef CONFIG_ARM
+	return !!memslot->dirty_bitmap;
+#else
+	return false;
+#endif
+}
+
 static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
 {
 	/*
@@ -59,6 +71,25 @@ static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
 		kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa);
 }
 
+/**
+ * stage2_dissolve_pmd() - clear and flush huge PMD entry
+ * @kvm:	pointer to kvm structure.
+ * @addr:	IPA
+ * @pmd:	pmd pointer for IPA
+ *
+ * Function clears a PMD entry, flushes addr 1st and 2nd stage TLBs. Marks all
+ * pages in the range dirty.
+ */
+static void stage2_dissolve_pmd(struct kvm *kvm, phys_addr_t addr, pmd_t *pmd)
+{
+	if (!kvm_pmd_huge(*pmd))
+		return;
+
+	pmd_clear(pmd);
+	kvm_tlb_flush_vmid_ipa(kvm, addr);
+	put_page(virt_to_page(pmd));
+}
+
 static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache,
 				  int min, int max)
 {
@@ -703,10 +734,13 @@ static int stage2_set_pmd_huge(struct kvm *kvm, struct kvm_mmu_memory_cache
 }
 
 static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
-			  phys_addr_t addr, const pte_t *new_pte, bool iomap)
+			  phys_addr_t addr, const pte_t *new_pte,
+			  unsigned long flags)
 {
 	pmd_t *pmd;
 	pte_t *pte, old_pte;
+	bool iomap = flags & KVM_S2PTE_FLAG_IS_IOMAP;
+	bool logging_active = flags & KVM_S2PTE_FLAG_LOGGING_ACTIVE;
 
 	/* Create stage-2 page table mapping - Levels 0 and 1 */
 	pmd = stage2_get_pmd(kvm, cache, addr);
@@ -718,6 +752,13 @@ static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
 		return 0;
 	}
 
+	/*
+	 * While dirty page logging - dissolve huge PMD, then continue on to
+	 * allocate page.
+	 */
+	if (logging_active)
+		stage2_dissolve_pmd(kvm, addr, pmd);
+
 	/* Create stage-2 page mappings - Level 2 */
 	if (pmd_none(*pmd)) {
 		if (!cache)
@@ -774,7 +815,8 @@ int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa,
 		if (ret)
 			goto out;
 		spin_lock(&kvm->mmu_lock);
-		ret = stage2_set_pte(kvm, &cache, addr, &pte, true);
+		ret = stage2_set_pte(kvm, &cache, addr, &pte,
+						KVM_S2PTE_FLAG_IS_IOMAP);
 		spin_unlock(&kvm->mmu_lock);
 		if (ret)
 			goto out;
@@ -1002,6 +1044,8 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	pfn_t pfn;
 	pgprot_t mem_type = PAGE_S2;
 	bool fault_ipa_uncached;
+	bool can_set_pte_rw = true;
+	unsigned long set_pte_flags = 0;
 
 	write_fault = kvm_is_write_fault(vcpu);
 	if (fault_status == FSC_PERM && !write_fault) {
@@ -1009,6 +1053,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 		return -EFAULT;
 	}
 
+
 	/* Let's check if we will get back a huge page backed by hugetlbfs */
 	down_read(&current->mm->mmap_sem);
 	vma = find_vma_intersection(current->mm, hva, hva + 1);
@@ -1059,12 +1104,35 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	if (is_error_pfn(pfn))
 		return -EFAULT;
 
-	if (kvm_is_device_pfn(pfn))
+	if (kvm_is_device_pfn(pfn)) {
 		mem_type = PAGE_S2_DEVICE;
+		set_pte_flags = KVM_S2PTE_FLAG_IS_IOMAP;
+	}
 
 	spin_lock(&kvm->mmu_lock);
 	if (mmu_notifier_retry(kvm, mmu_seq))
 		goto out_unlock;
+
+	/*
+	 * When logging is enabled general page fault handling changes:
+	 * -  Writable huge pages are dissolved on a read or write fault.
+	 * -  pte's are not allowed write permission on a read fault to
+	 *    writable region so future writes can be marked dirty
+	 * Access to non-writable region is unchanged, and logging of IO
+	 * regions is not allowed.
+	 */
+	if (memslot_is_logging(memslot) && writable) {
+		set_pte_flags = KVM_S2PTE_FLAG_LOGGING_ACTIVE;
+		if (hugetlb) {
+			gfn += pte_index(fault_ipa);
+			pfn += pte_index(fault_ipa);
+			hugetlb = false;
+		}
+		force_pte = true;
+		if (!write_fault)
+			can_set_pte_rw = false;
+	}
+
 	if (!hugetlb && !force_pte)
 		hugetlb = transparent_hugepage_adjust(&pfn, &fault_ipa);
 
@@ -1082,16 +1150,23 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 		ret = stage2_set_pmd_huge(kvm, memcache, fault_ipa, &new_pmd);
 	} else {
 		pte_t new_pte = pfn_pte(pfn, mem_type);
-		if (writable) {
+
+		/*
+		 * Don't set write permission, for non-writable region, and
+		 * for read fault to writable region while logging.
+		 */
+		if (writable && can_set_pte_rw) {
 			kvm_set_s2pte_writable(&new_pte);
 			kvm_set_pfn_dirty(pfn);
 		}
 		coherent_cache_guest_page(vcpu, hva, PAGE_SIZE,
 					  fault_ipa_uncached);
 		ret = stage2_set_pte(kvm, memcache, fault_ipa, &new_pte,
-			pgprot_val(mem_type) == pgprot_val(PAGE_S2_DEVICE));
+							set_pte_flags);
 	}
 
+	if (write_fault)
+		mark_page_dirty(kvm, gfn);
 
 out_unlock:
 	spin_unlock(&kvm->mmu_lock);
@@ -1242,7 +1317,14 @@ static void kvm_set_spte_handler(struct kvm *kvm, gpa_t gpa, void *data)
 {
 	pte_t *pte = (pte_t *)data;
 
-	stage2_set_pte(kvm, NULL, gpa, pte, false);
+	/*
+	 * We can always call stage2_set_pte with KVM_S2PTE_FLAG_LOGGING_ACTIVE
+	 * flag clear because MMU notifiers will have unmapped a huge PMD before
+	 * calling ->change_pte() (which in turn calls kvm_set_spte_hva()) and
+	 * therefore stage2_set_pte() never needs to clear out a huge PMD
+	 * through this calling path.
+	 */
+	stage2_set_pte(kvm, NULL, gpa, pte, 0);
 }
 
 
@@ -1396,7 +1478,13 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
 	bool writable = !(mem->flags & KVM_MEM_READONLY);
 	int ret = 0;
 
-	if (change != KVM_MR_CREATE && change != KVM_MR_MOVE)
+	/*
+	 * Let - enable of dirty page logging through, later check if it's for
+	 * an IO region and fail.
+	 */
+	if (change != KVM_MR_CREATE && change != KVM_MR_MOVE &&
+		change == KVM_MR_FLAGS_ONLY &&
+		!(memslot->flags & KVM_MEM_LOG_DIRTY_PAGES))
 		return 0;
 
 	/*
@@ -1447,15 +1535,24 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
 			phys_addr_t pa = (vma->vm_pgoff << PAGE_SHIFT) +
 					 vm_start - vma->vm_start;
 
-			ret = kvm_phys_addr_ioremap(kvm, gpa, pa,
+			if (change != KVM_MR_FLAGS_ONLY)
+				ret = kvm_phys_addr_ioremap(kvm, gpa, pa,
 						    vm_end - vm_start,
 						    writable);
+			else
+				/* IO region dirty page logging not allowed */
+				return -EINVAL;
+
 			if (ret)
 				break;
 		}
 		hva = vm_end;
 	} while (hva < reg_end);
 
+	/* Anything after here doesn't apply to memslot flag changes */
+	if (change == KVM_MR_FLAGS_ONLY)
+		return ret;
+
 	spin_lock(&kvm->mmu_lock);
 	if (ret)
 		unmap_stage2_range(kvm, mem->guest_phys_addr, mem->memory_size);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux