On Fri, Nov 07, 2014 at 03:58:18PM -0800, Andy Lutomirski wrote:
> diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
> index 3710b8241945..a5afdf0f7fa4 100644
> --- a/arch/x86/kernel/entry_64.S
> +++ b/arch/x86/kernel/entry_64.S
> @@ -804,6 +804,54 @@ retint_swapgs: /* return to user-space */
Ok, so retint_swapgs is also on the error_exit path.
What you're basically proposing is to use SYSRET on exceptions exit
too AFAICT. And while I don't see anything wrong with the patch, you
probably need to run this by more people like tip guys + Linus just in
case. We can't allow ourselves to leak stuff here.
> */
> DISABLE_INTERRUPTS(CLBR_ANY)
> TRACE_IRQS_IRETQ
> +
> + /*
> + * Try to use SYSRET instead of IRET if we're returning to
> + * a completely clean 64-bit userspace context.
> + */
> + movq (RCX-R11)(%rsp), %rcx
> + cmpq %rcx,(RIP-R11)(%rsp) /* RCX == RIP */
> + jne opportunistic_sysret_failed
> +
> + /*
> + * On Intel CPUs, sysret with non-canonical RCX/RIP will #GP
> + * in kernel space. This essentially lets the user take over
> + * the kernel, since userspace controls RSP. It's not worth
> + * testing for canonicalness exactly -- this check detects any
> + * of the 17 high bits set, which is true for non-canonical
> + * or kernel addresses. (This will pessimize vsyscall=native.
> + * Big deal.)
> + */
> + shr $47, %rcx
shr $__VIRTUAL_MASK_SHIFT, %rcx
I guess, in case someone decides to play with the address space again
and forgets this naked bit here.
> + jnz opportunistic_sysret_failed
> +
> + cmpq $__USER_CS,(CS-R11)(%rsp) /* CS must match SYSRET */
> + jne opportunistic_sysret_failed
> +
> + movq (R11-R11)(%rsp), %r11
> + cmpq %r11,(EFLAGS-R11)(%rsp) /* R11 == RFLAGS */
> + jne opportunistic_sysret_failed
> +
> + testq $X86_EFLAGS_RF,%r11 /* sysret can't restore RF */
> + jnz opportunistic_sysret_failed
> +
> + /* nothing to check for RSP */
> +
> + cmpq $__USER_DS,(SS-R11)(%rsp) /* SS must match SYSRET */
> + jne opportunistic_sysret_failed
> +
> + /*
> + * We win! This label is here just for ease of understanding
> + * perf profiles. Nothing jumps here.
> + */
> +irq_return_via_sysret:
> + CFI_REMEMBER_STATE
> + RESTORE_ARGS 1,8,1
> + movq (RSP-RIP)(%rsp),%rsp
> + USERGS_SYSRET64
> + CFI_RESTORE_STATE
> +
> +opportunistic_sysret_failed:
> SWAPGS
> jmp restore_args
Ok, dammit, it happened again:
...
[ 13.480778] BTRFS info (device sda9): disk space caching is enabled
[ 13.487270] BTRFS: has skinny extents
[ 14.368392] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.928679] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 15.936406] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 15.942879] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 115.065408] ata1.00: exception Emask 0x0 SAct 0x7fd80000 SErr 0x0 action 0x6 frozen
[ 115.073159] ata1.00: failed command: WRITE FPDMA QUEUED
[ 115.078459] ata1.00: cmd 61/80:98:c0:e7:35/4a:00:1f:00:00/40 tag 19 ncq 9764864 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 115.093623] ata1.00: status: { DRDY }
[ 115.097314] ata1.00: failed command: WRITE FPDMA QUEUED
[ 115.102569] ata1.00: cmd 61/30:a0:40:32:36/20:00:1f:00:00/40 tag 20 ncq 4218880 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 115.117668] ata1.00: status: { DRDY }
[ 115.121351] ata1.00: failed command: WRITE FPDMA QUEUED
[ 115.126602] ata1.00: cmd 61/80:b0:80:f7:37/20:00:1f:00:00/40 tag 22 ncq 4259840 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 115.141701] ata1.00: status: { DRDY }
[ 115.145389] ata1.00: failed command: WRITE FPDMA QUEUED
[ 115.150638] ata1.00: cmd 61/90:b8:70:52:36/03:00:1f:00:00/40 tag 23 ncq 466944 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 115.165682] ata1.00: status: { DRDY }
[ 115.169357] ata1.00: failed command: WRITE FPDMA QUEUED
[ 115.174617] ata1.00: cmd 61/c0:c0:00:58:36/39:00:1f:00:00/40 tag 24 ncq 7569408 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 115.189713] ata1.00: status: { DRDY }
[ 115.193400] ata1.00: failed command: WRITE FPDMA QUEUED
[ 115.198650] ata1.00: cmd 61/80:c8:c0:91:36/4b:00:1f:00:00/40 tag 25 ncq 9895936 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 115.213755] ata1.00: status: { DRDY }
[ 115.217431] ata1.00: failed command: WRITE FPDMA QUEUED
[ 115.222692] ata1.00: cmd 61/80:d0:40:dd:36/4a:00:1f:00:00/40 tag 26 ncq 9764864 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 115.237788] ata1.00: status: { DRDY }
[ 115.241479] ata1.00: failed command: WRITE FPDMA QUEUED
[ 115.246723] ata1.00: cmd 61/40:d8:c0:27:37/30:00:1f:00:00/40 tag 27 ncq 6324224 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 115.261825] ata1.00: status: { DRDY }
[ 115.265519] ata1.00: failed command: READ FPDMA QUEUED
[ 115.270683] ata1.00: cmd 60/08:e0:40:98:18/00:00:1f:00:00/40 tag 28 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 115.285432] ata1.00: status: { DRDY }
[ 115.289113] ata1.00: failed command: WRITE FPDMA QUEUED
[ 115.294367] ata1.00: cmd 61/00:e8:00:58:37/15:00:1f:00:00/40 tag 29 ncq 2752512 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 115.309463] ata1.00: status: { DRDY }
[ 115.313149] ata1.00: failed command: WRITE FPDMA QUEUED
[ 115.318399] ata1.00: cmd 61/00:f0:00:6d:37/2b:00:1f:00:00/40 tag 30 ncq 5636096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 115.333503] ata1.00: status: { DRDY }
[ 115.337201] ata1: hard resetting link
[ 115.645895] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 115.743776] ata1.00: configured for UDMA/133
[ 115.748074] ata1.00: device reported invalid CHS sector 0
[ 115.753516] ata1.00: device reported invalid CHS sector 0
[ 115.758947] ata1.00: device reported invalid CHS sector 0
[ 115.764383] ata1.00: device reported invalid CHS sector 0
[ 115.769825] ata1.00: device reported invalid CHS sector 0
[ 115.775260] ata1.00: device reported invalid CHS sector 0
[ 115.780689] ata1.00: device reported invalid CHS sector 0
[ 115.786123] ata1.00: device reported invalid CHS sector 0
[ 115.791563] ata1.00: device reported invalid CHS sector 0
[ 115.796998] ata1.00: device reported invalid CHS sector 0
[ 115.802431] ata1.00: device reported invalid CHS sector 0
[ 115.807914] ata1: EH complete
[ 146.085052] ata1.00: exception Emask 0x0 SAct 0x77c SErr 0x0 action 0x6 frozen
[ 146.092320] ata1.00: failed command: READ FPDMA QUEUED
[ 146.097489] ata1.00: cmd 60/08:10:40:98:18/00:00:1f:00:00/40 tag 2 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 146.112367] ata1.00: status: { DRDY }
[ 146.116244] ata1.00: failed command: WRITE FPDMA QUEUED
[ 146.121696] ata1.00: cmd 61/40:18:c0:27:37/30:00:1f:00:00/40 tag 3 ncq 6324224 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 146.137389] ata1.00: status: { DRDY }
[ 146.141267] ata1.00: failed command: WRITE FPDMA QUEUED
[ 146.146710] ata1.00: cmd 61/80:20:40:dd:36/4a:00:1f:00:00/40 tag 4 ncq 9764864 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 146.162395] ata1.00: status: { DRDY }
[ 146.166269] ata1.00: failed command: WRITE FPDMA QUEUED
[ 146.171723] ata1.00: cmd 61/80:28:c0:91:36/4b:00:1f:00:00/40 tag 5 ncq 9895936 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 146.187402] ata1.00: status: { DRDY }
[ 146.191278] ata1.00: failed command: WRITE FPDMA QUEUED
[ 146.196718] ata1.00: cmd 61/c0:30:00:58:36/39:00:1f:00:00/40 tag 6 ncq 7569408 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 146.212399] ata1.00: status: { DRDY }
[ 146.216275] ata1.00: failed command: WRITE FPDMA QUEUED
[ 146.221723] ata1.00: cmd 61/80:40:80:f7:37/20:00:1f:00:00/40 tag 8 ncq 4259840 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 146.237407] ata1.00: status: { DRDY }
[ 146.241280] ata1.00: failed command: WRITE FPDMA QUEUED
[ 146.246725] ata1.00: cmd 61/30:48:40:32:36/20:00:1f:00:00/40 tag 9 ncq 4218880 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 146.262407] ata1.00: status: { DRDY }
[ 146.266282] ata1.00: failed command: WRITE FPDMA QUEUED
[ 146.271731] ata1.00: cmd 61/80:50:c0:e7:35/4a:00:1f:00:00/40 tag 10 ncq 9764864 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 146.287498] ata1.00: status: { DRDY }
[ 146.291371] ata1: hard resetting link
[ 146.599768] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 146.608680] ata1.00: configured for UDMA/133
[ 146.613180] ata1.00: device reported invalid CHS sector 0
[ 146.618807] ata1.00: device reported invalid CHS sector 0
[ 146.624430] ata1.00: device reported invalid CHS sector 0
[ 146.630048] ata1.00: device reported invalid CHS sector 0
[ 146.635658] ata1.00: device reported invalid CHS sector 0
[ 146.641270] ata1.00: device reported invalid CHS sector 0
[ 146.646881] ata1.00: device reported invalid CHS sector 0
[ 146.652484] ata1.00: device reported invalid CHS sector 0
[ 146.658122] ata1: EH complete
[ 177.110908] ata1.00: exception Emask 0x0 SAct 0x7f800 SErr 0x0 action 0x6 frozen
[ 177.118525] ata1.00: failed command: WRITE FPDMA QUEUED
[ 177.123960] ata1.00: cmd 61/80:58:c0:e7:35/4a:00:1f:00:00/40 tag 11 ncq 9764864 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 177.139559] ata1.00: status: { DRDY }
[ 177.143419] ata1.00: failed command: WRITE FPDMA QUEUED
[ 177.148849] ata1.00: cmd 61/30:60:40:32:36/20:00:1f:00:00/40 tag 12 ncq 4218880 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 177.164454] ata1.00: status: { DRDY }
[ 177.168311] ata1.00: failed command: WRITE FPDMA QUEUED
[ 177.173747] ata1.00: cmd 61/80:68:80:f7:37/20:00:1f:00:00/40 tag 13 ncq 4259840 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 177.189387] ata1.00: status: { DRDY }
[ 177.193254] ata1.00: failed command: WRITE FPDMA QUEUED
[ 177.198691] ata1.00: cmd 61/c0:70:00:58:36/39:00:1f:00:00/40 tag 14 ncq 7569408 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 177.214430] ata1.00: status: { DRDY }
[ 177.218304] ata1.00: failed command: WRITE FPDMA QUEUED
[ 177.223755] ata1.00: cmd 61/80:78:c0:91:36/4b:00:1f:00:00/40 tag 15 ncq 9895936 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 177.239575] ata1.00: status: { DRDY }
[ 177.243460] ata1.00: failed command: WRITE FPDMA QUEUED
[ 177.248908] ata1.00: cmd 61/80:80:40:dd:36/4a:00:1f:00:00/40 tag 16 ncq 9764864 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 177.264743] ata1.00: status: { DRDY }
[ 177.268622] ata1.00: failed command: WRITE FPDMA QUEUED
[ 177.274075] ata1.00: cmd 61/40:88:c0:27:37/30:00:1f:00:00/40 tag 17 ncq 6324224 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 177.289913] ata1.00: status: { DRDY }
[ 177.293795] ata1.00: failed command: READ FPDMA QUEUED
[ 177.299153] ata1.00: cmd 60/08:90:40:98:18/00:00:1f:00:00/40 tag 18 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 177.314633] ata1.00: status: { DRDY }
[ 177.318509] ata1: hard resetting link
[ 177.626616] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 177.968639] ata1.00: configured for UDMA/133
[ 177.973609] ata1.00: device reported invalid CHS sector 0
[ 177.979669] ata1.00: device reported invalid CHS sector 0
[ 177.985723] ata1.00: device reported invalid CHS sector 0
[ 177.991371] ata1.00: device reported invalid CHS sector 0
[ 177.997008] ata1.00: device reported invalid CHS sector 0
[ 178.002641] ata1.00: device reported invalid CHS sector 0
[ 178.008260] ata1.00: device reported invalid CHS sector 0
[ 178.013886] ata1.00: device reported invalid CHS sector 0
[ 178.019558] ata1: EH complete
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
