> From: Song, Jike > Sent: Wednesday, December 10, 2014 2:34 PM > > CC Kevin. > > > On 12/09/2014 05:54 PM, Jan Kiszka wrote: > > On 2014-12-04 03:24, Jike Song wrote: > >> Hi all, > >> > >> We are pleased to announce the first release of KVMGT project. KVMGT > is > >> the implementation of Intel GVT-g technology, a full GPU virtualization > >> solution. Under Intel GVT-g, a virtual GPU instance is maintained for > >> each VM, with part of performance critical resources directly assigned. > >> The capability of running native graphics driver inside a VM, without > >> hypervisor intervention in performance critical paths, achieves a good > >> balance of performance, feature, and sharing capability. > >> > >> > >> KVMGT is still in the early stage: > >> > >> - Basic functions of full GPU virtualization works, guest can see a > >> full-featured vGPU. > >> We ran several 3D workloads such as lightsmark, nexuiz, urbanterror > >> and warsow. > >> > >> - Only Linux guest supported so far, and PPGTT must be disabled in > >> guest through a > >> kernel parameter(see README.kvmgt in QEMU). > >> > >> - This drop also includes some Xen specific changes, which will be > >> cleaned up later. > >> > >> - Our end goal is to upstream both XenGT and KVMGT, which shares > ~90% > >> logic for vGPU > >> device model (will be part of i915 driver), with only difference in > >> hypervisor > >> specific services > >> > >> - insufficient test coverage, so please bear with stability issues :) > >> > >> > >> > >> There are things need to be improved, esp. the KVM interfacing part: > >> > >> 1 a domid was added to each KVMGT guest > >> > >> An ID is needed for foreground OS switching, e.g. > >> > >> # echo <domid> > > /sys/kernel/vgt/control/foreground_vm > >> > >> domid 0 is reserved for host OS. > >> > >> > >> 2 SRCU workarounds. > >> > >> Some KVM functions, such as: > >> > >> kvm_io_bus_register_dev > >> install_new_memslots > >> > >> must be called *without* &kvm->srcu read-locked. Otherwise it > >> hangs. > >> > >> In KVMGT, we need to register an iodev only *after* BAR > >> registers are > >> written by guest. That means, we already have &kvm->srcu > hold - > >> trapping/emulating PIO(BAR registers) makes us in such a > condition. > >> That will make kvm_io_bus_register_dev hangs. > >> > >> Currently we have to disable rcu_assign_pointer() in such > >> functions. > >> > >> These were dirty workarounds, your suggestions are high > welcome! > >> > >> > >> 3 syscalls were called to access "/dev/mem" from kernel > >> > >> An in-kernel memslot was added for aperture, but using syscalls > >> like > >> open and mmap to open and access the character device > "/dev/mem", > >> for pass-through. > >> > >> > >> > >> > >> The source codes(kernel, qemu as well as seabios) are available at github: > >> > >> git://github.com/01org/KVMGT-kernel > >> git://github.com/01org/KVMGT-qemu > >> git://github.com/01org/KVMGT-seabios > >> > >> In the KVMGT-qemu repository, there is a "README.kvmgt" to be referred. > >> > >> > >> > >> More information about Intel GVT-g and KVMGT can be found at: > >> > >> > https://www.usenix.org/conference/atc14/technical-sessions/presentation/tia > n > >> > >> > http://events.linuxfoundation.org/sites/events/files/slides/KVMGT-a%20Full%2 > 0GPU%20Virtualization%20Solution_1.pdf > >> > >> > >> > >> Appreciate your comments, BUG reports, and contributions! > >> > > > > There is an even increasing interest to keep KVM's in-kernel guest > > interface as small as possible, specifically for security reasons. I'm > > sure there are some good performance reasons to create a new in-kernel > > device model, but I suppose those will need good evidences why things > > are done in the way they finally should be - and not via a user-space > > device model. This is likely not a binary decision (all userspace vs. no > > userspace), it is more about the size and robustness of the in-kernel > > model vs. its performance. Thanks for explaining the background. We're not against the userspace model if applied, but based on our analysis we figured out the in-kernel model is the best suite, not just for performance reason, but also for the tight couple to i915 functionalities (scheduling, interrupt, security, etc.) and hypervisor functionalities (GPU shadow page table, etc.) which are best handled in kernel directly. Definitely we don't want to split it just for performance reason, w/o a functionally clear separation, because that just creates unnecessary/messy user/kernel interfaces. And now we've got i915 community's signal that they're willing to pick the core code into i915 driver, which we're currently working on. So, not to eliminate the possibility of user/kernel split, how about we first look at those in-kernel dm changes for KVM? Then you can help judge whether it's a reasonable change or instead there's a better option. Jike will summarize and start the discussion in a separate thread. > > > > One aspect could also be important: Are there hardware improvements in > > sight that will eventually help to reduce the in-kernel device model and > > make the overall design even more robust? How will those changes fit > > best into a proposed user/kernel split? > > I can't talk about hardware improvements publicly, but the foreseen changes target support in kernel drivers. :-) Thanks Kevin ��.n��������+%������w��{.n�����o�^n�r������&��z�ޗ�zf���h���~����������_��+v���)ߣ�
