On 2014/8/21 21:06, Andre Przywara wrote:
> With everything in place we allow userland to request the kernel
> using a virtual GICv3 in the guest, which finally lifts the 8 vCPU
> limit for a guest.
> Also we provide the necessary support for guests setting the memory
> addresses for the virtual distributor and redistributors.
> This requires some userland code to make use of that feature and
> explicitly ask for a virtual GICv3.
>
> Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
> ---
> arch/arm64/include/uapi/asm/kvm.h | 7 ++++++
> include/kvm/arm_vgic.h | 4 ++--
> virt/kvm/arm/vgic-v3-emul.c | 3 +++
> virt/kvm/arm/vgic.c | 46 ++++++++++++++++++++++++++-----------
> 4 files changed, 45 insertions(+), 15 deletions(-)
>
> diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
> index 5513de4..9a62081 100644
> --- a/arch/arm64/include/uapi/asm/kvm.h
> +++ b/arch/arm64/include/uapi/asm/kvm.h
> @@ -77,6 +77,13 @@ struct kvm_regs {
> #define KVM_VGIC_V2_DIST_SIZE 0x1000
> #define KVM_VGIC_V2_CPU_SIZE 0x2000
>
> +/* Supported VGICv3 address types */
> +#define KVM_VGIC_V3_ADDR_TYPE_DIST 2
> +#define KVM_VGIC_V3_ADDR_TYPE_REDIST 3
> +
> +#define KVM_VGIC_V3_DIST_SIZE SZ_64K
> +#define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K)
> +
> #define KVM_ARM_VCPU_POWER_OFF 0 /* CPU is started in OFF state */
> #define KVM_ARM_VCPU_EL1_32BIT 1 /* CPU running a 32bit VM */
> #define KVM_ARM_VCPU_PSCI_0_2 2 /* CPU uses PSCI v0.2 */
> diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
> index 3b164ee..82e00a5 100644
> --- a/include/kvm/arm_vgic.h
> +++ b/include/kvm/arm_vgic.h
> @@ -35,8 +35,8 @@
> #define VGIC_MAX_IRQS 1024
>
> /* Sanity checks... */
> -#if (KVM_MAX_VCPUS > 8)
> -#error Invalid number of CPU interfaces
> +#if (KVM_MAX_VCPUS > 255)
> +#error Too many KVM VCPUs, the VGIC only supports up to 255 VCPUs for now
> #endif
>
> #if (VGIC_NR_IRQS_LEGACY & 31)
> diff --git a/virt/kvm/arm/vgic-v3-emul.c b/virt/kvm/arm/vgic-v3-emul.c
> index ac5c5ee..d4d9fe4 100644
> --- a/virt/kvm/arm/vgic-v3-emul.c
> +++ b/virt/kvm/arm/vgic-v3-emul.c
> @@ -874,6 +874,9 @@ static int vgic_v3_has_attr(struct kvm_device *dev,
> case KVM_VGIC_V2_ADDR_TYPE_DIST:
> case KVM_VGIC_V2_ADDR_TYPE_CPU:
> return -ENXIO;
> + case KVM_VGIC_V3_ADDR_TYPE_DIST:
> + case KVM_VGIC_V3_ADDR_TYPE_REDIST:
> + return 0;
> }
> break;
> case KVM_DEV_ARM_VGIC_GRP_DIST_REGS:
> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
> index b1bcb6d..f13ab4e 100644
> --- a/virt/kvm/arm/vgic.c
> +++ b/virt/kvm/arm/vgic.c
> @@ -1567,7 +1567,7 @@ static int vgic_ioaddr_assign(struct kvm *kvm, phys_addr_t *ioaddr,
> /**
> * kvm_vgic_addr - set or get vgic VM base addresses
> * @kvm: pointer to the vm struct
> - * @type: the VGIC addr type, one of KVM_VGIC_V2_ADDR_TYPE_XXX
> + * @type: the VGIC addr type, one of KVM_VGIC_V[23]_ADDR_TYPE_XXX
> * @addr: pointer to address value
> * @write: if true set the address in the VM address space, if false read the
> * address
> @@ -1581,29 +1581,49 @@ int kvm_vgic_addr(struct kvm *kvm, unsigned long type, u64 *addr, bool write)
> {
> int r = 0;
> struct vgic_dist *vgic = &kvm->arch.vgic;
> + int type_needed;
> + phys_addr_t *addr_ptr, block_size;
>
> mutex_lock(&kvm->lock);
> switch (type) {
> case KVM_VGIC_V2_ADDR_TYPE_DIST:
> - if (write) {
> - r = vgic_ioaddr_assign(kvm, &vgic->vgic_dist_base,
> - *addr, KVM_VGIC_V2_DIST_SIZE);
> - } else {
> - *addr = vgic->vgic_dist_base;
> - }
> + type_needed = KVM_DEV_TYPE_ARM_VGIC_V2;
> + addr_ptr = &vgic->vgic_dist_base;
> + block_size = KVM_VGIC_V2_DIST_SIZE;
> break;
> case KVM_VGIC_V2_ADDR_TYPE_CPU:
> - if (write) {
> - r = vgic_ioaddr_assign(kvm, &vgic->vgic_cpu_base,
> - *addr, KVM_VGIC_V2_CPU_SIZE);
> - } else {
> - *addr = vgic->vgic_cpu_base;
> - }
> + type_needed = KVM_DEV_TYPE_ARM_VGIC_V2;
> + addr_ptr = &vgic->vgic_cpu_base;
> + block_size = KVM_VGIC_V2_CPU_SIZE;
> break;
> +#ifdef CONFIG_ARM_GIC_V3
> + case KVM_VGIC_V3_ADDR_TYPE_DIST:
> + type_needed = KVM_DEV_TYPE_ARM_VGIC_V3;
> + addr_ptr = &vgic->vgic_dist_base;
> + block_size = KVM_VGIC_V3_DIST_SIZE;
> + break;
> + case KVM_VGIC_V3_ADDR_TYPE_REDIST:
Hi, Andre, here is the redist region base address, is it?
So, I think the block_size should be (online_vcpus * KVM_VGIC_V3_REDIST_SIZE).
> + type_needed = KVM_DEV_TYPE_ARM_VGIC_V3;
> + addr_ptr = &vgic->vgic_redist_base;
> + block_size = KVM_VGIC_V3_REDIST_SIZE;
> + break;
> +#endif
> default:
> r = -ENODEV;
> + goto out;
> }
>
> + if (vgic->vgic_model != type_needed) {
> + r = -ENODEV;
> + goto out;
> + }
> +
Here, call vgic_ioaddr_assign func to assign redist region base address may be wrong...
In this func, it will check the GICD and GICC assign base address is overlap each other or not,
and, there is not the GICR check action.
Thanks!
> + if (write)
> + r = vgic_ioaddr_assign(kvm, addr_ptr, *addr, block_size);
> + else
> + *addr = *addr_ptr;
> +
> +out:
> mutex_unlock(&kvm->lock);
> return r;
> }
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
