Hi, Paolo, Amit, any ideas? Thanks, Zhang Haoyu On 2014-9-4 15:56, Zhang Haoyu wrote: >>>>> If virtio-blk and virtio-serial share an IRQ, the guest operating system has to check each virtqueue for activity. Maybe there is some inefficiency doing that. >>>>> AFAIK virtio-serial registers 64 virtqueues (on 31 ports + console) even if everything is unused. >>>> That could be the case if MSI is disabled. >>> Do the windows virtio drivers enable MSIs, in their inf file? >> It depends on the version of the drivers, but it is a reasonable guess >> at what differs between Linux and Windows. Haoyu, can you give us the >> output of lspci from a Linux guest? >> > I made a test with fio on rhel-6.5 guest, the same degradation happened too, this degradation can be reproduced on rhel6.5 guest 100%. > virtio_console module installed: > 64K-write-sequence: 285 MBPS, 4380 IOPS > virtio_console module uninstalled: > 64K-write-sequence: 370 MBPS, 5670 IOPS > > And, virio-blk's interrupt mode always is MSI, no matter if virtio_console module is installed or uninstalled. > 25: 2245933 PCI-MSI-edge virtio1-requests > > fio command: > fio -filename /dev/vda -direct=1 -iodepth=1 -thread -rw=write -ioengine=psync -bs=64k -size=30G -numjobs=1 -name=mytest > > QEMU comamnd: > /usr/bin/kvm -id 5497356709352 -chardev socket,id=qmp,path=/var/run/qemu-server/5497356709352.qmp,server,nowait -mon chardev=qmp,mode=control -vnc :0,websocket,to=200 -enable-kvm -pidfile /var/run/qemu-server/5497356709352.pid -daemonize -name io-test-rhel-6.5 -smp sockets=1,cores=1 -cpu core2duo -nodefaults -vga cirrus -no-hpet -k en-us -boot menu=on,splash-time=8000 -m 4096 -usb -drive file=/sf/data/local/zhanghaoyu/rhel-server-6.5-x86_64-dvd.iso,if=none,id=drive-ide0,media=cdrom,aio=native,forecast=disable -device ide-cd,bus=ide.0,unit=0,drive=drive-ide0,id=ide0,bootindex=200 -drive file=/sf/data/local/images/host-1051721dff13/io-test-rhel-6.5.vm/vm-disk-1.qcow2,if=none,id=drive-virtio1,cache=none,aio=native -device virtio-blk-pci,drive=drive-virtio1,id=virtio1,bus=pci.0,addr=0xb -drive file=/sf/data/local/images/host-1051721dff13/io-test-rhel-6.5.vm/vm-disk-2.qcow2,if=none,id=drive-virtio2,cache=none,aio=native -device virtio-blk-pci,drive=drive-virtio2,id=virtio2,bus=pci > .0,addr=0xc,bootindex=101 -netdev type=tap,id=net0,ifname=164922379979200,script=/sf/etc/kvm/vtp-bridge,vhost=on,vhostforce=on -device virtio-net-pci,mac=FE:FC:FE:C6:47:F6,netdev=net0,bus=pci.0,addr=0x12,id=net0,bootindex=300 -rtc driftfix=slew,clock=rt -global kvm-pit.lost_tick_policy=discard -global PIIX4_PM.disable_s3=1 -global PIIX4_PM.disable_s4=1 -chardev socket,path=/run/virtser/1649223799792.sock,server,nowait,id=channelser -device virtio-serial,vectors=4 -device virtserialport,chardev=channelser,name=channelser.virtserial0.0 > > [environment] > Host:linux-3.10(RHEL7-rc1) > QEMU: qemu-2.0.1 > Guest: RHEL6.5 > > # lspci -tv > -[0000:00]-+-00.0 Intel Corporation 440FX - 82441FX PMC [Natoma] > +-01.0 Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] > +-01.1 Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] > +-01.2 Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] > +-01.3 Intel Corporation 82371AB/EB/MB PIIX4 ACPI > +-02.0 Cirrus Logic GD 5446 > +-03.0 Red Hat, Inc Virtio console > +-0b.0 Red Hat, Inc Virtio block device > +-0c.0 Red Hat, Inc Virtio block device > \-12.0 Red Hat, Inc Virtio network device > > # lspci -vvv > 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) > Subsystem: Red Hat, Inc Qemu virtual machine > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] > Subsystem: Red Hat, Inc Qemu virtual machine > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > 00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] (prog-if 80 [Master]) > Subsystem: Red Hat, Inc Qemu virtual machine > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] > Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) > Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] > Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) > Region 4: I/O ports at c0e0 [size=16] > Kernel driver in use: ata_piix > Kernel modules: ata_generic, pata_acpi, ata_piix > > 00:01.2 USB controller: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] (rev 01) (prog-if 00 [UHCI]) > Subsystem: Red Hat, Inc Qemu virtual machine > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin D routed to IRQ 11 > Region 4: I/O ports at c080 [size=32] > Kernel driver in use: uhci_hcd > > 00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03) > Subsystem: Red Hat, Inc Qemu virtual machine > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 9 > Kernel driver in use: piix4_smbus > Kernel modules: i2c-piix4 > > 00:02.0 VGA compatible controller: Cirrus Logic GD 5446 (prog-if 00 [VGA controller]) > Subsystem: Red Hat, Inc Device 1100 > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M] > Region 1: Memory at febd0000 (32-bit, non-prefetchable) [size=4K] > Expansion ROM at febc0000 [disabled] [size=64K] > Kernel modules: cirrusfb > > 00:03.0 Communication controller: Red Hat, Inc Virtio console > Subsystem: Red Hat, Inc Device 0003 > Physical Slot: 3 > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at c0a0 [size=32] > Region 1: Memory at febd1000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] MSI-X: Enable- Count=4 Masked- > Vector table: BAR=1 offset=00000000 > PBA: BAR=1 offset=00000800 > Kernel driver in use: virtio-pci > Kernel modules: virtio_pci > > 00:0b.0 SCSI storage controller: Red Hat, Inc Virtio block device > Subsystem: Red Hat, Inc Device 0002 > Physical Slot: 11 > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at c000 [size=64] > Region 1: Memory at febd2000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] MSI-X: Enable+ Count=2 Masked- > Vector table: BAR=1 offset=00000000 > PBA: BAR=1 offset=00000800 > Kernel driver in use: virtio-pci > Kernel modules: virtio_pci > > 00:0c.0 SCSI storage controller: Red Hat, Inc Virtio block device > Subsystem: Red Hat, Inc Device 0002 > Physical Slot: 12 > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at c040 [size=64] > Region 1: Memory at febd3000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] MSI-X: Enable+ Count=2 Masked- > Vector table: BAR=1 offset=00000000 > PBA: BAR=1 offset=00000800 > Kernel driver in use: virtio-pci > Kernel modules: virtio_pci > > 00:12.0 Ethernet controller: Red Hat, Inc Virtio network device > Subsystem: Red Hat, Inc Device 0001 > Physical Slot: 18 > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at c0c0 [size=32] > Region 1: Memory at febd4000 (32-bit, non-prefetchable) [size=4K] > Expansion ROM at feb80000 [disabled] [size=256K] > Capabilities: [40] MSI-X: Enable+ Count=3 Masked- > Vector table: BAR=1 offset=00000000 > PBA: BAR=1 offset=00000800 > Kernel driver in use: virtio-pci > Kernel modules: virtio_pci > > Thanks, > Zhang Haoyu > >> Paolo > > -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
