On Mon, Sep 01, 2014 at 01:41:54PM +0800, Amos Kong wrote:
> One VM only has 128 msix interrupt, virtio-config interrupt
> has less workload. This patch shares one normal interrupt
normal == INT#x? Please don't call it normal. The proper name is
"legacy INT#x".
So you are trying to use legacy INT#x at the same time
with MSI-X? This does not work: the PCI spec says:
While enabled for MSI or MSI-X
operation, a function is prohibited from using its INTx# pin (if
implemented) to request
service (MSI, MSI-X, and INTx# are mutually exclusive).
does the patch work for you? If it does it might be a (minor) spec
violation in kvm.
Besides, INT#x really leads to terrible performance because
sharing is forced even if there aren't many devices.
Why do we need INT#x?
How about setting IRQF_SHARED for the config interrupt
while using MSI-X? You'd have to read ISR to check that the interrupt was
intended for your device.
> for configuration between virtio devices.
>
> Signed-off-by: Amos Kong <akong@xxxxxxxxxx>
> ---
> drivers/virtio/virtio_pci.c | 41 ++++++++++++++++-------------------------
> 1 file changed, 16 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
> index 3d1463c..b1263b3 100644
> --- a/drivers/virtio/virtio_pci.c
> +++ b/drivers/virtio/virtio_pci.c
> @@ -52,6 +52,7 @@ struct virtio_pci_device
> /* Name strings for interrupts. This size should be enough,
> * and I'm too lazy to allocate each name separately. */
> char (*msix_names)[256];
> + char config_msix_name[256];
> /* Number of available vectors */
> unsigned msix_vectors;
> /* Vectors allocated, excluding per-vq vectors if any */
> @@ -282,12 +283,6 @@ static void vp_free_vectors(struct virtio_device *vdev)
> free_cpumask_var(vp_dev->msix_affinity_masks[i]);
>
> if (vp_dev->msix_enabled) {
> - /* Disable the vector used for configuration */
> - iowrite16(VIRTIO_MSI_NO_VECTOR,
> - vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
> - /* Flush the write out to device */
> - ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
> -
> pci_disable_msix(vp_dev->pci_dev);
> vp_dev->msix_enabled = 0;
> }
> @@ -339,24 +334,18 @@ static int vp_request_msix_vectors(struct virtio_device *vdev, int nvectors,
> goto error;
> vp_dev->msix_enabled = 1;
>
> - /* Set the vector used for configuration */
> - v = vp_dev->msix_used_vectors;
> - snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
> + /* Set shared IRQ for configuration */
> + snprintf(vp_dev->config_msix_name, sizeof(*vp_dev->msix_names),
> "%s-config", name);
> - err = request_irq(vp_dev->msix_entries[v].vector,
> - vp_config_changed, 0, vp_dev->msix_names[v],
> + err = request_irq(vp_dev->pci_dev->irq,
> + vp_config_changed,
> + IRQF_SHARED,
> + vp_dev->config_msix_name,
> vp_dev);
> - if (err)
> - goto error;
> - ++vp_dev->msix_used_vectors;
> -
> - iowrite16(v, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
> - /* Verify we had enough resources to assign the vector */
> - v = ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
> - if (v == VIRTIO_MSI_NO_VECTOR) {
> - err = -EBUSY;
> + if (!err)
> + vp_dev->intx_enabled = 1;
> + else
> goto error;
> - }
>
> if (!per_vq_vectors) {
> /* Shared vector for all VQs */
> @@ -535,14 +524,16 @@ static int vp_try_to_find_vqs(struct virtio_device *vdev, unsigned nvqs,
> goto error_request;
> } else {
> if (per_vq_vectors) {
> - /* Best option: one for change interrupt, one per vq. */
> - nvectors = 1;
> + /* Best option: one normal interrupt for change,
> + one msix per vq. */
> + nvectors = 0;
> for (i = 0; i < nvqs; ++i)
> if (callbacks[i])
> ++nvectors;
> } else {
> - /* Second best: one for change, shared for all vqs. */
> - nvectors = 2;
> + /* Second best: one normal interrupt for
> + change, share one msix for all vqs. */
> + nvectors = 1;
> }
>
> err = vp_request_msix_vectors(vdev, nvectors, per_vq_vectors);
> --
> 1.9.3
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
