[Bug 82761] DMAR:[fault reason 06] PTE Read access is not set

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



https://bugzilla.kernel.org/show_bug.cgi?id=82761

--- Comment #5 from Ansa89 <ansalonistefano@xxxxxxxxx> ---
Tested with 3.17-rc1: the errors still there, but the spam rate seems lower
than 3.16.1 (with 3.16.1 I get the errors repeated a lot of times and the count
grows fast; with 3.17-rc1 I get the same errors repeated less times and the
count seems to grow slower).

After ~10 minutes:
dmesg | grep -i dmar
ACPI: DMAR 0x00000000C8EA83F0 0000B8 (v01 INTEL  SNB      00000001 INTL
00000001)
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
dmar: RMRR base: 0x000000c8d17000 end: 0x000000c8d24fff
dmar: RMRR base: 0x000000cb800000 end: 0x000000cf9fffff
DMAR: No ATSR found
[drm] DMAR active, disabling use of stolen memory
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000 
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000 
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000 
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000 
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000 
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000 
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000 
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000 
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000 
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000 
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000 
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000 
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000 
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000 
DMAR:[fault reason 06] PTE Read access is not set
dmar: DRHD: handling fault status reg 3
dmar: DMAR:[DMA Read] Request device [05:00.0] fault addr ff3f4000 
DMAR:[fault reason 06] PTE Read access is not set


In the end the bug seems not fixed in 3.17-rc1.

-- 
You are receiving this mail because:
You are watching the assignee of the bug.
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux