Make use of the RX_MODE control virtqueue class to enable the
set_rx_mode netdev interface. This allows us to selectively
enable/disable promiscuous and allmulti mode so we don't see
packets we don't want. We'll automatically enable these as
needed if additional unicast or multicast addresses are
requested.
Signed-off-by: Alex Williamson <alex.williamson@xxxxxx>
---
drivers/net/virtio_net.c | 26 ++++++++++++++++++++++++++
include/linux/virtio_net.h | 10 ++++++++++
2 files changed, 36 insertions(+), 0 deletions(-)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index c909444..b247558 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -660,6 +660,30 @@ static int virtnet_set_tx_csum(struct net_device *dev, u32 data)
return ethtool_op_set_tx_hw_csum(dev, data);
}
+static void virtnet_set_rx_mode(struct net_device *dev)
+{
+ struct virtnet_info *vi = netdev_priv(dev);
+ u8 promisc, allmulti;
+
+ if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_RX))
+ return;
+
+ promisc = ((dev->flags & IFF_PROMISC) != 0 || dev->uc_count > 0);
+ allmulti = ((dev->flags & IFF_ALLMULTI) != 0 || dev->mc_count > 0);
+
+ if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX,
+ VIRTIO_NET_CTRL_RX_PROMISC,
+ &promisc, sizeof(promisc)))
+ printk(KERN_WARNING "%s: Failed to %sable promisc mode.\n",
+ dev->name, promisc ? "en" : "dis");
+
+ if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX,
+ VIRTIO_NET_CTRL_RX_ALLMULTI,
+ &allmulti, sizeof(allmulti)))
+ printk(KERN_WARNING "%s: Failed to %sable allmulti mode.\n",
+ dev->name, allmulti ? "en" : "dis");
+}
+
static struct ethtool_ops virtnet_ethtool_ops = {
.set_tx_csum = virtnet_set_tx_csum,
.set_sg = ethtool_op_set_sg,
@@ -684,6 +708,7 @@ static const struct net_device_ops virtnet_netdev = {
.ndo_start_xmit = start_xmit,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = virtnet_set_mac_address,
+ .ndo_set_rx_mode = virtnet_set_rx_mode,
.ndo_change_mtu = virtnet_change_mtu,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = virtnet_netpoll,
@@ -902,6 +927,7 @@ static unsigned int features[] = {
VIRTIO_NET_F_HOST_ECN, VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6,
VIRTIO_NET_F_GUEST_ECN, /* We don't yet handle UFO input. */
VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ,
+ VIRTIO_NET_F_CTRL_RX,
VIRTIO_F_NOTIFY_ON_EMPTY,
};
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index fd0981c..aac09ec 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -23,6 +23,7 @@
#define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */
#define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */
#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
+#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
@@ -76,4 +77,13 @@ typedef __u8 virtio_net_ctrl_ack;
#define VIRTIO_NET_OK 0
#define VIRTIO_NET_ERR 1
+/*
+ * Control the RX mode, ie. promisucous and allmulti. PROMISC and
+ * ALLMULTI commands require an "out" sg entry containing a 1 byte
+ * state value, zero = disable, non-zero = enable.
+ */
+#define VIRTIO_NET_CTRL_RX 0
+ #define VIRTIO_NET_CTRL_RX_PROMISC 0
+ #define VIRTIO_NET_CTRL_RX_ALLMULTI 1
+
#endif /* _LINUX_VIRTIO_NET_H */
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
