Can we have "per-VM PLE values"? My understanding is that the ple values are kvm module setting which applying to all VMs in the system. And all vms must be stopped first, then unload kvm-intel, reload kvm-intel with new ple setting. /sbin/modprobe -r kvm-intel /sbin/modprobe kvm-intel ple_window=16384 Regards Bin -----Original Message----- From: Marcelo Tosatti [mailto:mtosatti@xxxxxxxxxx] Sent: Thursday, March 06, 2014 10:07 PM To: Li, Bin (Bin) Cc: Paolo Bonzini; kvm@xxxxxxxxxxxxxxx; Jatania, Neel (Neel); linux-kernel@xxxxxxxxxxxxxxx; Peter Zijlstra; Mike Galbraith; Chris Wright; ttracy@xxxxxxxxxx; Nakajima, Jun; riel@xxxxxxxxxx Subject: Re: Enhancement for PLE handler in KVM On Wed, Mar 05, 2014 at 09:16:45PM +0000, Li, Bin (Bin) wrote: > Did you also find out here why this is the case? > > Binl: > Yes. The application running in our customized embedded OS is also real time application which is timing sensitive. > The timing sensitive level varies among the applications. > When I talking about different threshold, the assumption is using default 4096 ple_window setting. > If I set up the ple_window to 16384 or higher, there will be no problem for our application. But the finial user could also run linux or window VM on same hypervisor which would prefer default 4096 setting for linux and windows. Then have per-VM PLE values? > We are looking for a solution to be good for both linux / window and real time application. > The enhancement patch we proposed will satisfy both linux/window application and real time embedded applications. > > Paolo -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
