Re: [PATCH v2] PCI: Fix crash during pci_dev hot-unplug on pseries KVM guest

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 7/23/24 09:21, Rob Herring wrote:
On Mon, Jul 15, 2024 at 01:52:30PM -0700, Lizhi Hou wrote:
On 7/15/24 11:55, Rob Herring wrote:
On Mon, Jul 15, 2024 at 2:08 AM Amit Machhiwal <amachhiw@xxxxxxxxxxxxx> wrote:
With CONFIG_PCI_DYNAMIC_OF_NODES [1], a hot-plug and hot-unplug sequence
of a PCI device attached to a PCI-bridge causes following kernel Oops on
a pseries KVM guest:

   RTAS: event: 2, Type: Hotplug Event (229), Severity: 1
   Kernel attempted to read user page (10ec00000048) - exploit attempt? (uid: 0)
   BUG: Unable to handle kernel data access on read at 0x10ec00000048
   Faulting instruction address: 0xc0000000012d8728
   Oops: Kernel access of bad area, sig: 11 [#1]
   LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
<snip>
   NIP [c0000000012d8728] __of_changeset_entry_invert+0x10/0x1ac
   LR [c0000000012da7f0] __of_changeset_revert_entries+0x98/0x180
   Call Trace:
   [c00000000bcc3970] [c0000000012daa60] of_changeset_revert+0x58/0xd8
   [c00000000bcc39c0] [c000000000d0ed78] of_pci_remove_node+0x74/0xb0
   [c00000000bcc39f0] [c000000000cdcfe0] pci_stop_bus_device+0xf4/0x138
   [c00000000bcc3a30] [c000000000cdd140] pci_stop_and_remove_bus_device_locked+0x34/0x64
   [c00000000bcc3a60] [c000000000cf3780] remove_store+0xf0/0x108
   [c00000000bcc3ab0] [c000000000e89e04] dev_attr_store+0x34/0x78
   [c00000000bcc3ad0] [c0000000007f8dd4] sysfs_kf_write+0x70/0xa4
   [c00000000bcc3af0] [c0000000007f7248] kernfs_fop_write_iter+0x1d0/0x2e0
   [c00000000bcc3b40] [c0000000006c9b08] vfs_write+0x27c/0x558
   [c00000000bcc3bf0] [c0000000006ca168] ksys_write+0x90/0x170
   [c00000000bcc3c40] [c000000000033248] system_call_exception+0xf8/0x290
   [c00000000bcc3e50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec
<snip>

A git bisect pointed this regression to be introduced via [1] that added
a mechanism to create device tree nodes for parent PCI bridges when a
PCI device is hot-plugged.

The Oops is caused when `pci_stop_dev()` tries to remove a non-existing
device-tree node associated with the pci_dev that was earlier
hot-plugged and was attached under a pci-bridge. The PCI dev header
`dev->hdr_type` being 0, results a conditional check done with
`pci_is_bridge()` into false. Consequently, a call to
`of_pci_make_dev_node()` to create a device node is never made. When at
a later point in time, in the device node removal path, a memcpy is
attempted in `__of_changeset_entry_invert()`; since the device node was
never created, results in an Oops due to kernel read access to a bad
address.

To fix this issue, the patch updates `of_changeset_create_node()` to
allocate a new node only when the device node doesn't exist and init it
in case it does already. Also, introduce `of_pci_free_node()` to be
called to only revert and destroy the changeset device node that was
created via a call to `of_changeset_create_node()`.

[1] commit 407d1a51921e ("PCI: Create device tree node for bridge")

Fixes: 407d1a51921e ("PCI: Create device tree node for bridge")
Reported-by: Kowshik Jois B S <kowsjois@xxxxxxxxxxxxx>
Signed-off-by: Lizhi Hou <lizhi.hou@xxxxxxx>
Signed-off-by: Amit Machhiwal <amachhiw@xxxxxxxxxxxxx>
---
Changes since v1:
      * Included Lizhi's suggested changes on V1
      * Fixed below two warnings from Lizhi's changes and rearranged the cleanup
        part a bit in `of_pci_make_dev_node`
          drivers/pci/of.c:611:6: warning: no previous prototype for ‘of_pci_free_node’ [-Wmissing-prototypes]
            611 | void of_pci_free_node(struct device_node *np)
                |      ^~~~~~~~~~~~~~~~
          drivers/pci/of.c: In function ‘of_pci_make_dev_node’:
          drivers/pci/of.c:696:1: warning: label ‘out_destroy_cset’ defined but not used [-Wunused-label]
            696 | out_destroy_cset:
                | ^~~~~~~~~~~~~~~~
      * V1: https://lore.kernel.org/all/20240703141634.2974589-1-amachhiw@xxxxxxxxxxxxx/

   drivers/of/dynamic.c  | 16 ++++++++++++----
   drivers/of/unittest.c |  2 +-
   drivers/pci/bus.c     |  3 +--
   drivers/pci/of.c      | 39 ++++++++++++++++++++++++++-------------
   drivers/pci/pci.h     |  2 ++
   include/linux/of.h    |  1 +
   6 files changed, 43 insertions(+), 20 deletions(-)

diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c
index dda6092e6d3a..9bba5e82a384 100644
--- a/drivers/of/dynamic.c
+++ b/drivers/of/dynamic.c
@@ -492,21 +492,29 @@ struct device_node *__of_node_dup(const struct device_node *np,
    * a given changeset.
    *
    * @ocs: Pointer to changeset
+ * @np: Pointer to device node. If null, allocate a new node. If not, init an
+ *     existing one.
    * @parent: Pointer to parent device node
    * @full_name: Node full name
    *
    * Return: Pointer to the created device node or NULL in case of an error.
    */
   struct device_node *of_changeset_create_node(struct of_changeset *ocs,
+                                            struct device_node *np,
                                               struct device_node *parent,
                                               const char *full_name)
   {
-       struct device_node *np;
          int ret;

-       np = __of_node_dup(NULL, full_name);
-       if (!np)
-               return NULL;
+       if (!np) {
+               np = __of_node_dup(NULL, full_name);
+               if (!np)
+                       return NULL;
+       } else {
+               of_node_set_flag(np, OF_DYNAMIC);
+               of_node_set_flag(np, OF_DETACHED);
Are we going to rename the function to
of_changeset_create_or_maybe_modify_node()? No. The functions here are
very clear in that they allocate new objects and don't reuse what's
passed in.
Ok. How about keeping of_changeset_create_node unchanged.

Instead, call kzalloc(), of_node_init() and of_changeset_attach_node()

in of_pci_make_dev_node() directly.

A similar example is dlpar_parse_cc_node().


Does this sound better?
No, because really that code should be re-written using of_changeset
API.

My suggestion is add a data pointer to struct of_changeset and then set
that to something to know the data ptr is a changeset and is your
changeset.

I do not fully understand the point. I think the issue is that we do not know if a given of_node is created by of_pci_make_dev_node(), correct?

of_node->data can point to anything. And we do not know if it points a cset or not.  Do you mean to add a flag (e.g. OF_PCI_DYNAMIC) to indicate of_node->data points to cset?

I probably misunderstood. Could you explain more?


Thanks,

Lizhi


Rob




[Index of Archives]     [KVM Development]     [KVM ARM]     [KVM ia64]     [Linux Virtualization]     [Linux USB Devel]     [Linux Video]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux