Re: [PATCH v6 2/3] spapr: nvdimm: Implement H_SCM_FLUSH hcall

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 2/1/22 18:57, Shivaprasad G Bhat wrote:
The patch adds support for the SCM flush hcall for the nvdimm devices.
To be available for exploitation by guest through the next patch. The
hcall is applicable only for new SPAPR specific device class which is
also introduced in this patch.

The hcall expects the semantics such that the flush to return with
H_LONG_BUSY_ORDER_10_MSEC when the operation is expected to take longer
time along with a continue_token. The hcall to be called again by providing
the continue_token to get the status. So, all fresh requests are put into
a 'pending' list and flush worker is submitted to the thread pool. The
thread pool completion callbacks move the requests to 'completed' list,
which are cleaned up after collecting the return status for the guest
in subsequent hcall from the guest.

The semantics makes it necessary to preserve the continue_tokens and
their return status across migrations. So, the completed flush states
are forwarded to the destination and the pending ones are restarted
at the destination in post_load. The necessary nvdimm flush specific
vmstate structures are also introduced in this patch which are to be
saved in the new SPAPR specific nvdimm device to be introduced in the
following patch.

Signed-off-by: Shivaprasad G Bhat <sbhat@xxxxxxxxxxxxx>
---
  hw/ppc/spapr.c                |    2
  hw/ppc/spapr_nvdimm.c         |  263 +++++++++++++++++++++++++++++++++++++++++
  include/hw/ppc/spapr.h        |    4 -
  include/hw/ppc/spapr_nvdimm.h |    1
  4 files changed, 269 insertions(+), 1 deletion(-)

diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
index 3d6ec309dd..9263985663 100644
--- a/hw/ppc/spapr.c
+++ b/hw/ppc/spapr.c
@@ -1634,6 +1634,8 @@ static void spapr_machine_reset(MachineState *machine)
          spapr->ov5_cas = spapr_ovec_clone(spapr->ov5);
      }
+ spapr_nvdimm_finish_flushes();
+
      /* DRC reset may cause a device to be unplugged. This will cause troubles
       * if this device is used by another device (eg, a running vhost backend
       * will crash QEMU if the DIMM holding the vring goes away). To avoid such
diff --git a/hw/ppc/spapr_nvdimm.c b/hw/ppc/spapr_nvdimm.c
index 91de1052f2..ed6fda2c23 100644
--- a/hw/ppc/spapr_nvdimm.c
+++ b/hw/ppc/spapr_nvdimm.c
@@ -22,6 +22,7 @@
   * THE SOFTWARE.
   */
  #include "qemu/osdep.h"
+#include "qemu/cutils.h"
  #include "qapi/error.h"
  #include "hw/ppc/spapr_drc.h"
  #include "hw/ppc/spapr_nvdimm.h"
@@ -30,6 +31,9 @@
  #include "hw/ppc/fdt.h"
  #include "qemu/range.h"
  #include "hw/ppc/spapr_numa.h"
+#include "block/thread-pool.h"
+#include "migration/vmstate.h"
+#include "qemu/pmem.h"
/* DIMM health bitmap bitmap indicators. Taken from kernel's papr_scm.c */
  /* SCM device is unable to persist memory contents */
@@ -47,6 +51,14 @@
  /* Have an explicit check for alignment */
  QEMU_BUILD_BUG_ON(SPAPR_MINIMUM_SCM_BLOCK_SIZE % SPAPR_MEMORY_BLOCK_SIZE);
+#define TYPE_SPAPR_NVDIMM "spapr-nvdimm"
+OBJECT_DECLARE_TYPE(SpaprNVDIMMDevice, SPAPRNVDIMMClass, SPAPR_NVDIMM)
+
+struct SPAPRNVDIMMClass {
+    /* private */
+    NVDIMMClass parent_class;
+};
+
  bool spapr_nvdimm_validate(HotplugHandler *hotplug_dev, NVDIMMDevice *nvdimm,
                             uint64_t size, Error **errp)
  {
@@ -375,6 +387,256 @@ static target_ulong h_scm_bind_mem(PowerPCCPU *cpu, SpaprMachineState *spapr,
      return H_SUCCESS;
  }
+typedef struct SpaprNVDIMMDeviceFlushState {
+    uint64_t continue_token;
+    int64_t hcall_ret;
+    int backend_fd;

state->backend_fd is being calculated right before calling thread_pool_submit_aio() and used
in the flush_worker_cb() callback. I believe we can remove it and calculate backend_fd inside
flush_worker_cb(), like this:


--- a/hw/ppc/spapr_nvdimm.c
+++ b/hw/ppc/spapr_nvdimm.c
@@ -390,7 +390,6 @@ static target_ulong h_scm_bind_mem(PowerPCCPU *cpu, SpaprMachineState *spa
pr,
 typedef struct SpaprNVDIMMDeviceFlushState {
     uint64_t continue_token;
     int64_t hcall_ret;
-    int backend_fd;
     uint32_t drcidx;
QLIST_ENTRY(SpaprNVDIMMDeviceFlushState) node;
@@ -411,6 +410,7 @@ static int flush_worker_cb(void *opaque)
     SpaprDrc *drc = spapr_drc_by_index(state->drcidx);
     PCDIMMDevice *dimm = PC_DIMM(drc->dev);
     HostMemoryBackend *backend = MEMORY_BACKEND(dimm->hostmem);
+    int backend_fd = memory_region_get_fd(&backend->mr);
if (object_property_get_bool(OBJECT(backend), "pmem", NULL)) {
         MemoryRegion *mr = host_memory_backend_get_memory(dimm->hostmem);
@@ -422,7 +422,7 @@ static int flush_worker_cb(void *opaque)
         pmem_persist(ptr, size);
     } else {
         /* flush raw backing image */
-        if (qemu_fdatasync(state->backend_fd) < 0) {
+        if (qemu_fdatasync(backend_fd) < 0) {
             error_report("papr_scm: Could not sync nvdimm to backend file: %s",
                          strerror(errno));
             return H_HARDWARE;
@@ -447,12 +447,9 @@ static int spapr_nvdimm_flush_post_load(void *opaque, int version_id)
 {
     SpaprNVDIMMDevice *s_nvdimm = (SpaprNVDIMMDevice *)opaque;
     SpaprNVDIMMDeviceFlushState *state;
-    HostMemoryBackend *backend = MEMORY_BACKEND(PC_DIMM(s_nvdimm)->hostmem);
     ThreadPool *pool = aio_get_thread_pool(qemu_get_aio_context());
QLIST_FOREACH(state, &s_nvdimm->pending_nvdimm_flush_states, node) {
-        state->backend_fd = memory_region_get_fd(&backend->mr);
-
         thread_pool_submit_aio(pool, flush_worker_cb, state,
                                spapr_nvdimm_flush_completion_cb, state);
     }
@@ -621,7 +618,6 @@ static target_ulong h_scm_flush(PowerPCCPU *cpu, SpaprMachineState *spapr,
         }
state->drcidx = drc_index;
-        state->backend_fd = fd;
thread_pool_submit_aio(pool, flush_worker_cb, state,
                                spapr_nvdimm_flush_completion_cb, state);


This will spare some lines in flush_post_load() and a field in the SpaprNVDIMMDeviceFlushState.


+    uint32_t drcidx;
+
+    QLIST_ENTRY(SpaprNVDIMMDeviceFlushState) node;
+} SpaprNVDIMMDeviceFlushState;
+
+typedef struct SpaprNVDIMMDevice SpaprNVDIMMDevice;
+struct SpaprNVDIMMDevice {
+    NVDIMMDevice parent_obj;
+
+    uint64_t nvdimm_flush_token;
+    QLIST_HEAD(, SpaprNVDIMMDeviceFlushState) pending_nvdimm_flush_states;
+    QLIST_HEAD(, SpaprNVDIMMDeviceFlushState) completed_nvdimm_flush_states;
+};
+
+static int flush_worker_cb(void *opaque)
+{
+    SpaprNVDIMMDeviceFlushState *state = opaque;
+    SpaprDrc *drc = spapr_drc_by_index(state->drcidx);
+    PCDIMMDevice *dimm = PC_DIMM(drc->dev);
+    HostMemoryBackend *backend = MEMORY_BACKEND(dimm->hostmem);
+
+    if (object_property_get_bool(OBJECT(backend), "pmem", NULL)) {
+        MemoryRegion *mr = host_memory_backend_get_memory(dimm->hostmem);
+        void *ptr = memory_region_get_ram_ptr(mr);
+        size_t size = object_property_get_uint(OBJECT(dimm), PC_DIMM_SIZE_PROP,
+                                               NULL);
+
+        /* flush pmem backend */
+        pmem_persist(ptr, size);
+    } else {
+        /* flush raw backing image */
+        if (qemu_fdatasync(state->backend_fd) < 0) {
+            error_report("papr_scm: Could not sync nvdimm to backend file: %s",
+                         strerror(errno));
+            return H_HARDWARE;
+        }
+    }
+
+    return H_SUCCESS;
+}
+
+static void spapr_nvdimm_flush_completion_cb(void *opaque, int hcall_ret)
+{
+    SpaprNVDIMMDeviceFlushState *state = opaque;
+    SpaprDrc *drc = spapr_drc_by_index(state->drcidx);
+    SpaprNVDIMMDevice *s_nvdimm = SPAPR_NVDIMM(drc->dev);
+
+    state->hcall_ret = hcall_ret;
+    QLIST_REMOVE(state, node);
+    QLIST_INSERT_HEAD(&s_nvdimm->completed_nvdimm_flush_states, state, node);
+}
+
+static int spapr_nvdimm_flush_post_load(void *opaque, int version_id)
+{
+    SpaprNVDIMMDevice *s_nvdimm = (SpaprNVDIMMDevice *)opaque;
+    SpaprNVDIMMDeviceFlushState *state;
+    HostMemoryBackend *backend = MEMORY_BACKEND(PC_DIMM(s_nvdimm)->hostmem);
+    ThreadPool *pool = aio_get_thread_pool(qemu_get_aio_context());
+
+    QLIST_FOREACH(state, &s_nvdimm->pending_nvdimm_flush_states, node) {
+        state->backend_fd = memory_region_get_fd(&backend->mr);
+
+        thread_pool_submit_aio(pool, flush_worker_cb, state,
+                               spapr_nvdimm_flush_completion_cb, state);
+    }
+
+    return 0;
+}
+
+static const VMStateDescription vmstate_spapr_nvdimm_flush_state = {
+     .name = "spapr_nvdimm_flush_state",
+     .version_id = 1,
+     .minimum_version_id = 1,
+     .fields = (VMStateField[]) {
+         VMSTATE_UINT64(continue_token, SpaprNVDIMMDeviceFlushState),
+         VMSTATE_INT64(hcall_ret, SpaprNVDIMMDeviceFlushState),
+         VMSTATE_UINT32(drcidx, SpaprNVDIMMDeviceFlushState),
+         VMSTATE_END_OF_LIST()
+     },
+};
+
+const VMStateDescription vmstate_spapr_nvdimm_states = {
+    .name = "spapr_nvdimm_states",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .post_load = spapr_nvdimm_flush_post_load,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT64(nvdimm_flush_token, SpaprNVDIMMDevice),
+        VMSTATE_QLIST_V(completed_nvdimm_flush_states, SpaprNVDIMMDevice, 1,
+                        vmstate_spapr_nvdimm_flush_state,
+                        SpaprNVDIMMDeviceFlushState, node),
+        VMSTATE_QLIST_V(pending_nvdimm_flush_states, SpaprNVDIMMDevice, 1,
+                        vmstate_spapr_nvdimm_flush_state,
+                        SpaprNVDIMMDeviceFlushState, node),
+        VMSTATE_END_OF_LIST()
+    },
+};
+
+/*
+ * Assign a token and reserve it for the new flush state.
+ */
+static SpaprNVDIMMDeviceFlushState *spapr_nvdimm_init_new_flush_state(
+                                                SpaprNVDIMMDevice *spapr_nvdimm)
+{
+    SpaprNVDIMMDeviceFlushState *state;
+
+    state = g_malloc0(sizeof(*state));
+
+    spapr_nvdimm->nvdimm_flush_token++;
+    /* Token zero is presumed as no job pending. Asser on overflow to zero */


I guess you meant 'Assert'.



+    g_assert(spapr_nvdimm->nvdimm_flush_token != 0);
+
+    state->continue_token = spapr_nvdimm->nvdimm_flush_token;
+
+    QLIST_INSERT_HEAD(&spapr_nvdimm->pending_nvdimm_flush_states, state, node);
+
+    return state;
+}
+
+/*
+ * spapr_nvdimm_finish_flushes
+ *      Waits for all pending flush requests to complete
+ *      their execution and free the states
+ */
+void spapr_nvdimm_finish_flushes(void)
+{
+    SpaprNVDIMMDeviceFlushState *state, *next;
+    GSList *list, *nvdimms;
+
+    /*
+     * Called on reset path, the main loop thread which calls
+     * the pending BHs has gotten out running in the reset path,
+     * finally reaching here. Other code path being guest
+     * h_client_architecture_support, thats early boot up.
+     */
+    nvdimms = nvdimm_get_device_list();
+    for (list = nvdimms; list; list = list->next) {
+        NVDIMMDevice *nvdimm = list->data;
+        if (object_dynamic_cast(OBJECT(nvdimm), TYPE_SPAPR_NVDIMM)) {
+            SpaprNVDIMMDevice *s_nvdimm = SPAPR_NVDIMM(nvdimm);
+            while (!QLIST_EMPTY(&s_nvdimm->pending_nvdimm_flush_states)) {
+                aio_poll(qemu_get_aio_context(), true);
+            }
+
+            QLIST_FOREACH_SAFE(state, &s_nvdimm->completed_nvdimm_flush_states,
+                               node, next) {
+                QLIST_REMOVE(state, node);
+                g_free(state);
+            }
+        }
+    }
+    g_slist_free(nvdimms);
+}
+
+/*
+ * spapr_nvdimm_get_flush_status
+ *      Fetches the status of the hcall worker and returns
+ *      H_LONG_BUSY_ORDER_10_MSEC if the worker is still running.
+ */
+static int spapr_nvdimm_get_flush_status(SpaprNVDIMMDevice *s_nvdimm,
+                                         uint64_t token)
+{
+    SpaprNVDIMMDeviceFlushState *state, *node;
+
+    QLIST_FOREACH(state, &s_nvdimm->pending_nvdimm_flush_states, node) {
+        if (state->continue_token == token) {
+            return H_LONG_BUSY_ORDER_10_MSEC;
+        }
+    }
+
+    QLIST_FOREACH_SAFE(state, &s_nvdimm->completed_nvdimm_flush_states,
+                       node, node) {
+        if (state->continue_token == token) {
+            int ret = state->hcall_ret;
+            QLIST_REMOVE(state, node);
+            g_free(state);
+            return ret;
+        }
+    }
+
+    /* If not found in complete list too, invalid token */
+    return H_P2;
+}
+
+/*
+ * H_SCM_FLUSH
+ * Input: drc_index, continue-token
+ * Out: continue-token
+ * Return Value: H_SUCCESS, H_Parameter, H_P2, H_LONG_BUSY_ORDER_10_MSEC

We need to mention the H_UNSUPPORTED return value as well.


Thanks,


Daniel

+ *
+ * Given a DRC Index Flush the data to backend NVDIMM device. The hcall returns
+ * H_LONG_BUSY_ORDER_10_MSEC when the flush takes longer time and the hcall
+ * needs to be issued multiple times in order to be completely serviced. The
+ * continue-token from the output to be passed in the argument list of
+ * subsequent hcalls until the hcall is completely serviced at which point
+ * H_SUCCESS or other error is returned.
+ */
+static target_ulong h_scm_flush(PowerPCCPU *cpu, SpaprMachineState *spapr,
+                                target_ulong opcode, target_ulong *args)
+{
+    int ret;
+    uint32_t drc_index = args[0];
+    uint64_t continue_token = args[1];
+    SpaprDrc *drc = spapr_drc_by_index(drc_index);
+    PCDIMMDevice *dimm;
+    HostMemoryBackend *backend = NULL;
+    SpaprNVDIMMDeviceFlushState *state;
+    ThreadPool *pool = aio_get_thread_pool(qemu_get_aio_context());
+    int fd;
+
+    if (!drc || !drc->dev ||
+        spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) {
+        return H_PARAMETER;
+    }
+
+    dimm = PC_DIMM(drc->dev);
+    if (continue_token == 0) {
+        backend = MEMORY_BACKEND(dimm->hostmem);
+        fd = memory_region_get_fd(&backend->mr);
+
+        if (fd < 0) {
+            return H_UNSUPPORTED;
+        }
+
+        state = spapr_nvdimm_init_new_flush_state(SPAPR_NVDIMM(dimm));
+        if (!state) {
+            return H_HARDWARE;
+        }
+
+        state->drcidx = drc_index;
+        state->backend_fd = fd;
+
+        thread_pool_submit_aio(pool, flush_worker_cb, state,
+                               spapr_nvdimm_flush_completion_cb, state);
+
+        continue_token = state->continue_token;
+    }
+
+    ret = spapr_nvdimm_get_flush_status(SPAPR_NVDIMM(dimm), continue_token);
+    if (H_IS_LONG_BUSY(ret)) {
+        args[0] = continue_token;
+    }
+
+    return ret;
+}
+
  static target_ulong h_scm_unbind_mem(PowerPCCPU *cpu, SpaprMachineState *spapr,
                                       target_ulong opcode, target_ulong *args)
  {
@@ -523,6 +785,7 @@ static void spapr_scm_register_types(void)
      spapr_register_hypercall(H_SCM_UNBIND_MEM, h_scm_unbind_mem);
      spapr_register_hypercall(H_SCM_UNBIND_ALL, h_scm_unbind_all);
      spapr_register_hypercall(H_SCM_HEALTH, h_scm_health);
+    spapr_register_hypercall(H_SCM_FLUSH, h_scm_flush);
  }
type_init(spapr_scm_register_types)
diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
index ee7504b976..727b2a0e7f 100644
--- a/include/hw/ppc/spapr.h
+++ b/include/hw/ppc/spapr.h
@@ -341,6 +341,7 @@ struct SpaprMachineState {
  #define H_P7              -60
  #define H_P8              -61
  #define H_P9              -62
+#define H_UNSUPPORTED     -67
  #define H_OVERLAP         -68
  #define H_UNSUPPORTED_FLAG -256
  #define H_MULTI_THREADS_ACTIVE -9005
@@ -559,8 +560,9 @@ struct SpaprMachineState {
  #define H_SCM_UNBIND_ALL        0x3FC
  #define H_SCM_HEALTH            0x400
  #define H_RPT_INVALIDATE        0x448
+#define H_SCM_FLUSH             0x44C
-#define MAX_HCALL_OPCODE H_RPT_INVALIDATE
+#define MAX_HCALL_OPCODE        H_SCM_FLUSH
/* The hcalls above are standardized in PAPR and implemented by pHyp
   * as well.
diff --git a/include/hw/ppc/spapr_nvdimm.h b/include/hw/ppc/spapr_nvdimm.h
index 764f999f54..e9436cb6ef 100644
--- a/include/hw/ppc/spapr_nvdimm.h
+++ b/include/hw/ppc/spapr_nvdimm.h
@@ -21,5 +21,6 @@ void spapr_dt_persistent_memory(SpaprMachineState *spapr, void *fdt);
  bool spapr_nvdimm_validate(HotplugHandler *hotplug_dev, NVDIMMDevice *nvdimm,
                             uint64_t size, Error **errp);
  void spapr_add_nvdimm(DeviceState *dev, uint64_t slot);
+void spapr_nvdimm_finish_flushes(void);
#endif





[Index of Archives]     [KVM Development]     [KVM ARM]     [KVM ia64]     [Linux Virtualization]     [Linux USB Devel]     [Linux Video]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux