On Sat, Jul 18, 2020 at 1:13 AM Athira Rajeev
<atrajeev@xxxxxxxxxxxxxxxxxx> wrote:
>
> From: Madhavan Srinivasan <maddy@xxxxxxxxxxxxx>
>
> Add power10 feature function to dt_cpu_ftrs.c along
> with a power10 specific init() to initialize pmu sprs,
> sets the oprofile_cpu_type and cpu_features. This will
> enable performance monitoring unit(PMU) for Power10
> in CPU features with "performance-monitor-power10".
>
> For PowerISA v3.1, BHRB disable is controlled via Monitor Mode
> Control Register A (MMCRA) bit, namely "BHRB Recording Disable
> (BHRBRD)". This patch initializes MMCRA BHRBRD to disable BHRB
> feature at boot for power10.
>
> Signed-off-by: Madhavan Srinivasan <maddy@xxxxxxxxxxxxx>
> ---
> arch/powerpc/include/asm/reg.h | 3 +++
> arch/powerpc/kernel/cpu_setup_power.S | 8 ++++++++
> arch/powerpc/kernel/dt_cpu_ftrs.c | 26 ++++++++++++++++++++++++++
> 3 files changed, 37 insertions(+)
>
> diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
> index 21a1b2d..900ada1 100644
> --- a/arch/powerpc/include/asm/reg.h
> +++ b/arch/powerpc/include/asm/reg.h
> @@ -1068,6 +1068,9 @@
> #define MMCR0_PMC2_LOADMISSTIME 0x5
> #endif
>
> +/* BHRB disable bit for PowerISA v3.10 */
> +#define MMCRA_BHRB_DISABLE 0x0000002000000000
Shouldn't this go under SPRN_MMCRA with the other MMCRA_*.
> +
> /*
> * SPRG usage:
> *
> diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S
> index efdcfa7..b8e0d1e 100644
> --- a/arch/powerpc/kernel/cpu_setup_power.S
> +++ b/arch/powerpc/kernel/cpu_setup_power.S
> @@ -94,6 +94,7 @@ _GLOBAL(__restore_cpu_power8)
> _GLOBAL(__setup_cpu_power10)
> mflr r11
> bl __init_FSCR_power10
> + bl __init_PMU_ISA31
So we set MMCRA here but then aren't we still going to call __init_PMU
which will overwrite that?
Would this setting MMCRA also need to be handled in __restore_cpu_power10?
> b 1f
>
> _GLOBAL(__setup_cpu_power9)
> @@ -233,3 +234,10 @@ __init_PMU_ISA207:
> li r5,0
> mtspr SPRN_MMCRS,r5
> blr
> +
> +__init_PMU_ISA31:
> + li r5,0
> + mtspr SPRN_MMCR3,r5
> + LOAD_REG_IMMEDIATE(r5, MMCRA_BHRB_DISABLE)
> + mtspr SPRN_MMCRA,r5
> + blr
> diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c
> index 3a40951..f482286 100644
> --- a/arch/powerpc/kernel/dt_cpu_ftrs.c
> +++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
> @@ -450,6 +450,31 @@ static int __init feat_enable_pmu_power9(struct dt_cpu_feature *f)
> return 1;
> }
>
> +static void init_pmu_power10(void)
> +{
> + init_pmu_power9();
> +
> + mtspr(SPRN_MMCR3, 0);
> + mtspr(SPRN_MMCRA, MMCRA_BHRB_DISABLE);
> +}
> +
> +static int __init feat_enable_pmu_power10(struct dt_cpu_feature *f)
> +{
> + hfscr_pmu_enable();
> +
> + init_pmu_power10();
> + init_pmu_registers = init_pmu_power10;
> +
> + cur_cpu_spec->cpu_features |= CPU_FTR_MMCRA;
> + cur_cpu_spec->cpu_user_features |= PPC_FEATURE_PSERIES_PERFMON_COMPAT;
> +
> + cur_cpu_spec->num_pmcs = 6;
> + cur_cpu_spec->pmc_type = PPC_PMC_IBM;
> + cur_cpu_spec->oprofile_cpu_type = "ppc64/power10";
> +
> + return 1;
> +}
> +
> static int __init feat_enable_tm(struct dt_cpu_feature *f)
> {
> #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
> @@ -639,6 +664,7 @@ struct dt_cpu_feature_match {
> {"pc-relative-addressing", feat_enable, 0},
> {"machine-check-power9", feat_enable_mce_power9, 0},
> {"performance-monitor-power9", feat_enable_pmu_power9, 0},
> + {"performance-monitor-power10", feat_enable_pmu_power10, 0},
> {"event-based-branch-v3", feat_enable, 0},
> {"random-number-generator", feat_enable, 0},
> {"system-call-vectored", feat_disable, 0},
> --
> 1.8.3.1
>
