Claudio Carvalho <cclaudio@xxxxxxxxxxxxx> writes: > From: Sukadev Bhattiprolu <sukadev@xxxxxxxxxxxxxxxxxx> > > To enter a secure guest, we have to go through the ultravisor, therefore > we do a ucall when we are entering a secure guest. > > This change is needed for any sort of entry to the secure guest from the > hypervisor, whether it is a return from an hcall, a return from a > hypervisor interrupt, or the first time that a secure guest vCPU is run. > > If we are returning from an hcall, the results are already in the > appropriate registers R3:12, except for R3, R6 and R7. R3 has the status > of the reflected hcall, therefore we move it to R0 for the ultravisor and > set R3 to the UV_RETURN ucall number. R6,7 were used as temporary > registers, hence we restore them. This is another case where some documentation would help people to review the code. > Have fast_guest_return check the kvm_arch.secure_guest field so that a > new CPU enters UV when started (in response to a RTAS start-cpu call). > > Thanks to input from Paul Mackerras, Ram Pai and Mike Anderson. > > Signed-off-by: Sukadev Bhattiprolu <sukadev@xxxxxxxxxxxxxxxxxx> > [ Pass SRR1 in r11 for UV_RETURN, fix kvmppc_msr_interrupt to preserve > the MSR_S bit ] > Signed-off-by: Paul Mackerras <paulus@xxxxxxxxxx> > [ Fix UV_RETURN ucall number and arch.secure_guest check ] > Signed-off-by: Ram Pai <linuxram@xxxxxxxxxx> > [ Save the actual R3 in R0 for the ultravisor and use R3 for the > UV_RETURN ucall number. Update commit message and ret_to_ultra comment ] > Signed-off-by: Claudio Carvalho <cclaudio@xxxxxxxxxxxxx> > --- > arch/powerpc/include/asm/kvm_host.h | 1 + > arch/powerpc/include/asm/ultravisor-api.h | 1 + > arch/powerpc/kernel/asm-offsets.c | 1 + > arch/powerpc/kvm/book3s_hv_rmhandlers.S | 40 +++++++++++++++++++---- > 4 files changed, 37 insertions(+), 6 deletions(-) > > diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S > index cffb365d9d02..89813ca987c2 100644 > --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S > +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S > @@ -36,6 +36,7 @@ > #include <asm/asm-compat.h> > #include <asm/feature-fixups.h> > #include <asm/cpuidle.h> > +#include <asm/ultravisor-api.h> > > /* Sign-extend HDEC if not on POWER9 */ > #define EXTEND_HDEC(reg) \ > @@ -1092,16 +1093,12 @@ BEGIN_FTR_SECTION > END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) > > ld r5, VCPU_LR(r4) > - ld r6, VCPU_CR(r4) > mtlr r5 > - mtcr r6 > > ld r1, VCPU_GPR(R1)(r4) > ld r2, VCPU_GPR(R2)(r4) > ld r3, VCPU_GPR(R3)(r4) > ld r5, VCPU_GPR(R5)(r4) > - ld r6, VCPU_GPR(R6)(r4) > - ld r7, VCPU_GPR(R7)(r4) > ld r8, VCPU_GPR(R8)(r4) > ld r9, VCPU_GPR(R9)(r4) > ld r10, VCPU_GPR(R10)(r4) > @@ -1119,10 +1116,38 @@ BEGIN_FTR_SECTION > mtspr SPRN_HDSISR, r0 > END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) > > + ld r6, VCPU_KVM(r4) > + lbz r7, KVM_SECURE_GUEST(r6) > + cmpdi r7, 0 You could hoist the load of r6 and r7 to here? > + bne ret_to_ultra > + > + lwz r6, VCPU_CR(r4) > + mtcr r6 > + > + ld r7, VCPU_GPR(R7)(r4) > + ld r6, VCPU_GPR(R6)(r4) > ld r0, VCPU_GPR(R0)(r4) > ld r4, VCPU_GPR(R4)(r4) > HRFI_TO_GUEST > b . > +/* > + * We are entering a secure guest, so we have to invoke the ultravisor to do > + * that. If we are returning from a hcall, the results are already in the > + * appropriate registers R3:12, except for R3, R6 and R7. R3 has the status of > + * the reflected hcall, therefore we move it to R0 for the ultravisor and set > + * R3 to the UV_RETURN ucall number. R6,7 were used as temporary registers > + * above, hence we restore them. > + */ > +ret_to_ultra: > + lwz r6, VCPU_CR(r4) > + mtcr r6 > + mfspr r11, SPRN_SRR1 > + mr r0, r3 > + LOAD_REG_IMMEDIATE(r3, UV_RETURN) Worth open coding to save three instructions? > + ld r7, VCPU_GPR(R7)(r4) > + ld r6, VCPU_GPR(R6)(r4) > + ld r4, VCPU_GPR(R4)(r4) > + sc 2 > > /* > * Enter the guest on a P9 or later system where we have exactly > @@ -3318,13 +3343,16 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX) > * r0 is used as a scratch register > */ > kvmppc_msr_interrupt: > + andis. r0, r11, MSR_S@h > rldicl r0, r11, 64 - MSR_TS_S_LG, 62 > - cmpwi r0, 2 /* Check if we are in transactional state.. */ > + cmpwi cr1, r0, 2 /* Check if we are in transactional state.. */ > ld r11, VCPU_INTR_MSR(r9) > - bne 1f > + bne cr1, 1f > /* ... if transactional, change to suspended */ > li r0, 1 > 1: rldimi r11, r0, MSR_TS_S_LG, 63 - MSR_TS_T_LG > + beqlr > + oris r11, r11, MSR_S@h /* preserve MSR_S bit setting */ > blr I don't see this part mentioned in the change log? It's also pretty subtle, a comment might be helpful. cheers
