The radix guest code can has fewer restrictions about what context it
can run in, so move this flushing out of assembly and have it use the
Linux TLB flush implementations introduced previously.
This allows powerpc:tlbie trace events to be used.
This changes the tlbiel sequence to only execute RIC=2 flush once on
the first set flushed, then RIC=0 for the rest of the sets. The end
result of the flush should be unchanged. This matches the local PID
flush pattern that was introduced in a5998fcb92 ("powerpc/mm/radix:
Optimise tlbiel flush all case").
Signed-off-by: Nicholas Piggin <npiggin@xxxxxxxxx>
---
arch/powerpc/kvm/book3s_hv.c | 26 +++++++++++++++++++++++++
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 13 ++++++-------
2 files changed, 32 insertions(+), 7 deletions(-)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 4d07fca5121c..60c887faa0a9 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -2901,6 +2901,32 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
for (sub = 0; sub < core_info.n_subcores; ++sub)
spin_unlock(&core_info.vc[sub]->lock);
+ if (kvm_is_radix(vc->kvm)) {
+ int tmp = pcpu;
+
+ /*
+ * Do we need to flush the process scoped TLB for the LPAR?
+ *
+ * On POWER9, individual threads can come in here, but the
+ * TLB is shared between the 4 threads in a core, hence
+ * invalidating on one thread invalidates for all.
+ * Thus we make all 4 threads use the same bit here.
+ *
+ * Hash must be flushed in realmode in order to use tlbiel.
+ */
+ mtspr(SPRN_LPID, vc->kvm->arch.lpid);
+ isync();
+
+ if (cpu_has_feature(CPU_FTR_ARCH_300))
+ tmp &= ~0x3UL;
+
+ if (cpumask_test_cpu(tmp, &vc->kvm->arch.need_tlb_flush)) {
+ radix__local_flush_tlb_lpid_guest(vc->kvm->arch.lpid);
+ /* Clear the bit after the TLB flush */
+ cpumask_clear_cpu(tmp, &vc->kvm->arch.need_tlb_flush);
+ }
+ }
+
/*
* Interrupts will be enabled once we get into the guest,
* so tell lockdep that we're about to enable interrupts.
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index bd63fa8a08b5..d4c7bb3e777e 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -636,6 +636,10 @@ kvmppc_hv_entry:
/* Primary thread switches to guest partition. */
cmpwi r6,0
bne 10f
+
+ /* Radix has already switched LPID and flushed core TLB */
+ bne cr7,22f
+
lwz r7,KVM_LPID(r9)
BEGIN_FTR_SECTION
ld r6,KVM_SDR1(r9)
@@ -647,7 +651,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
mtspr SPRN_LPID,r7
isync
- /* See if we need to flush the TLB */
+ /* See if we need to flush the TLB. Hash has to be done in RM */
lhz r6,PACAPACAINDEX(r13) /* test_bit(cpu, need_tlb_flush) */
BEGIN_FTR_SECTION
/*
@@ -674,15 +678,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
li r7,0x800 /* IS field = 0b10 */
ptesync
li r0,0 /* RS for P9 version of tlbiel */
- bne cr7, 29f
28: tlbiel r7 /* On P9, rs=0, RIC=0, PRS=0, R=0 */
addi r7,r7,0x1000
bdnz 28b
- b 30f
-29: PPC_TLBIEL(7,0,2,1,1) /* for radix, RIC=2, PRS=1, R=1 */
- addi r7,r7,0x1000
- bdnz 29b
-30: ptesync
+ ptesync
23: ldarx r7,0,r6 /* clear the bit after TLB flushed */
andc r7,r7,r8
stdcx. r7,0,r6
--
2.17.0
--
To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
