Re: [PATCH 0/4] Avoid soft lockup message when KVM is stopped by host

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 15 Sep 2011, Marcelo Tosatti wrote:

> On Tue, Sep 13, 2011 at 04:49:55PM -0400, Eric B Munson wrote:
> > On Fri, 09 Sep 2011, Marcelo Tosatti wrote:
> > 
> > > On Thu, Sep 01, 2011 at 02:27:49PM -0600, emunson@xxxxxxxxx wrote:
> > > > On Thu, 01 Sep 2011 14:24:12 -0500, Anthony Liguori wrote:
> > > > >On 08/30/2011 07:26 AM, Marcelo Tosatti wrote:
> > > > >>On Mon, Aug 29, 2011 at 05:27:11PM -0600, Eric B Munson wrote:
> > > > >>>Currently, when qemu stops a guest kernel that guest will
> > > > >>>issue a soft lockup
> > > > >>>message when it resumes.  This set provides the ability for
> > > > >>>qemu to comminucate
> > > > >>>to the guest that it has been stopped.  When the guest hits
> > > > >>>the watchdog on
> > > > >>>resume it will check if it was suspended before issuing the
> > > > >>>warning.
> > > > >>>
> > > > >>>Eric B Munson (4):
> > > > >>>   Add flag to indicate that a vm was stopped by the host
> > > > >>>   Add functions to check if the host has stopped the vm
> > > > >>>   Add generic stubs for kvm stop check functions
> > > > >>>   Add check for suspended vm in softlockup detector
> > > > >>>
> > > > >>>  arch/x86/include/asm/pvclock-abi.h |    1 +
> > > > >>>  arch/x86/include/asm/pvclock.h     |    2 ++
> > > > >>>  arch/x86/kernel/kvmclock.c         |   14 ++++++++++++++
> > > > >>>  include/asm-generic/pvclock.h      |   14 ++++++++++++++
> > > > >>>  kernel/watchdog.c                  |   12 ++++++++++++
> > > > >>>  5 files changed, 43 insertions(+), 0 deletions(-)
> > > > >>>  create mode 100644 include/asm-generic/pvclock.h
> > > > >>>
> > > > >>>--
> > > > >>>1.7.4.1
> > > > >>
> > > > >>How is the host supposed to set this flag?
> > > > >>
> > > > >>As mentioned previously, if you save save/restore the offset
> > > > >>added to
> > > > >>kvmclock on stop/cont (and the TSC MSR, forgot to mention that), no
> > > > >>paravirt infrastructure is required. Which means the issue is
> > > > >>also fixed
> > > > >>for older guests.
> > > > >
> > 
> > Marcelo,
> > 
> > I think that stopping the TSC is the wrong approach because it will break time
> > between the two systems so timething that expects the monotonic clock to move
> > consistently will be wrong.
> 
> In case the VM stops for whatever reason, the host system is not
> supposed to adjust time related hardware state to compensate, in an
> attempt to present apparent continuous time.
> 
> If you save a VM and then restore it later, it is the guest
> responsability to adjust its time representation.
> 
> QEMU exposing continuous TSC and kvmclock state between "stop" and
> "cont" should not be a reason to introduce new paravirt infrastructure.
> 
> >  IMO, messing with the TSC at run time to avoid a watchdog message
> > is the wrong solution, better to teach the watchdog to ignore this
> > special case.
> 
> OK then, it is not a harmful addition, can you post the QEMU patches to
> set the "ignore watchdog" bit.

I am about to start working on the interface to set this bit, but to double
check I tried your suggestion to save the clock value on stop and restore it on
continue (see qemu patch below) and I am seeing very odd behavior from it.  On
random resumes the vm won't come back immediately (it took one 15 mintues to
respond) and the wall clock stays behind my host wall clock by the amount of
time it took to resume.

---
 cpus.c |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/cpus.c b/cpus.c
index 54c188c..4573e23 100644
--- a/cpus.c
+++ b/cpus.c
@@ -63,6 +63,7 @@
 #endif /* CONFIG_LINUX */
 
 static CPUState *next_cpu;
+struct kvm_clock_data data;
 
 /***********************************************************/
 void hw_error(const char *fmt, ...)
@@ -788,6 +789,7 @@ static int all_vcpus_paused(void)
 void pause_all_vcpus(void)
 {
     CPUState *penv = first_cpu;
+    int ret;
 
     while (penv) {
         penv->stop = 1;
@@ -803,11 +805,18 @@ void pause_all_vcpus(void)
             penv = (CPUState *)penv->next_cpu;
         }
     }
+
+    ret = kvm_vm_ioctl(kvm_state, KVM_GET_CLOCK, &data);
+    if (ret < 0) {
+        fprintf(stderr, "KVM_GET_CLOCK failed: %s\n", strerror(ret));
+        data.clock = 0;
+    }
 }
 
 void resume_all_vcpus(void)
 {
     CPUState *penv = first_cpu;
+    int ret;
 
     while (penv) {
         penv->stop = 0;
@@ -815,6 +824,11 @@ void resume_all_vcpus(void)
         qemu_cpu_kick(penv);
         penv = (CPUState *)penv->next_cpu;
     }
+    if (data.clock != 0) {
+        ret = kvm_vm_ioctl(kvm_state, KVM_SET_CLOCK, &data);
+        if (ret < 0)
+            fprintf(stderr, "KVM_SET_CLOCK failed: %s\n", strerror(ret));
+    }
 }
 
 static void qemu_tcg_init_vcpu(void *_env)
> 

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux KVM Devel]     [Linux Virtualization]     [Big List of Linux Books]     [Linux SCSI]     [Yosemite Forum]

  Powered by Linux