The main theme of this series is to kill off kvm_arch_init(), kvm_arch_hardware_(un)setup(), and kvm_arch_check_processor_compat(), which all originated in x86 code from way back when, and needlessly complicate both common KVM code and architecture code. E.g. many architectures don't mark functions/data as __init/__ro_after_init purely because kvm_init() isn't marked __init to support x86's separate vendor modules. The idea/hope is that with those hooks gone (moved to arch code), it will be easier for x86 (and other architectures) to modify their module init sequences as needed without having to fight common KVM code. E.g. I'm hoping that ARM can build on this to simplify its hardware enabling logic, especially the pKVM side of things. There are bug fixes throughout this series. They are more scattered than I would usually prefer, but getting the sequencing correct was a gigantic pain for many of the x86 fixes due to needing to fix common code in order for the x86 fix to have any meaning. And while the bugs are often fatal, they aren't all that interesting for most users as they either require a malicious admin or broken hardware, i.e. aren't likely to be encountered by the vast majority of KVM users. So unless someone _really_ wants a particular fix isolated for backporting, I'm not planning on shuffling patches. v2: - Collect reviews/acks. - Reset eVMCS controls in VP assist page when disabling hardware. [Vitaly] - Clean up labels in kvm_init(). [Chao] - Fix a goof where VMX compat checks used boot_cpu_has. [Kai] - Reorder patches and/or tweak changelogs to not require time travel. [Paolo, Kai] - Rewrite the changelog for the patch to move ARM away from kvm_arch_init() to call out that it fixes theoretical bugs. [Philippe] - Document why it's safe to allow preemption and/or migration when accessing kvm_usage_count. v1: https://lore.kernel.org/all/20221102231911.3107438-1-seanjc@xxxxxxxxxx Chao Gao (3): KVM: x86: Do compatibility checks when onlining CPU KVM: Rename and move CPUHP_AP_KVM_STARTING to ONLINE section KVM: Disable CPU hotplug during hardware enabling/disabling Isaku Yamahata (3): KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock KVM: Remove on_each_cpu(hardware_disable_nolock) in kvm_exit() KVM: Make hardware_enable_failed a local variable in the "enable all" path Marc Zyngier (1): KVM: arm64: Simplify the CPUHP logic Sean Christopherson (43): KVM: Register /dev/kvm as the _very_ last thing during initialization KVM: Initialize IRQ FD after arch hardware setup KVM: Allocate cpus_hardware_enabled after arch hardware setup KVM: Teardown VFIO ops earlier in kvm_exit() KVM: s390: Unwind kvm_arch_init() piece-by-piece() if a step fails KVM: s390: Move hardware setup/unsetup to init/exit KVM: x86: Do timer initialization after XCR0 configuration KVM: x86: Move hardware setup/unsetup to init/exit KVM: Drop arch hardware (un)setup hooks KVM: VMX: Reset eVMCS controls in VP assist page during hardware disabling KVM: VMX: Don't bother disabling eVMCS static key on module exit KVM: VMX: Move Hyper-V eVMCS initialization to helper KVM: x86: Move guts of kvm_arch_init() to standalone helper KVM: VMX: Do _all_ initialization before exposing /dev/kvm to userspace KVM: x86: Serialize vendor module initialization (hardware setup) KVM: arm64: Free hypervisor allocations if vector slot init fails KVM: arm64: Unregister perf callbacks if hypervisor finalization fails KVM: arm64: Do arm/arch initialization without bouncing through kvm_init() KVM: arm64: Mark kvm_arm_init() and its unique descendants as __init KVM: MIPS: Hardcode callbacks to hardware virtualization extensions KVM: MIPS: Setup VZ emulation? directly from kvm_mips_init() KVM: MIPS: Register die notifier prior to kvm_init() KVM: RISC-V: Do arch init directly in riscv_kvm_init() KVM: RISC-V: Tag init functions and data with __init, __ro_after_init KVM: PPC: Move processor compatibility check to module init KVM: s390: Do s390 specific init without bouncing through kvm_init() KVM: s390: Mark __kvm_s390_init() and its descendants as __init KVM: Drop kvm_arch_{init,exit}() hooks KVM: VMX: Make VMCS configuration/capabilities structs read-only after init KVM: x86: Do CPU compatibility checks in x86 code KVM: Drop kvm_arch_check_processor_compat() hook KVM: x86: Use KBUILD_MODNAME to specify vendor module name KVM: x86: Unify pr_fmt to use module name for all KVM modules KVM: VMX: Use current CPU's info to perform "disabled by BIOS?" checks KVM: x86: Do VMX/SVM support checks directly in vendor code KVM: VMX: Shuffle support checks and hardware enabling code around KVM: SVM: Check for SVM support in CPU compatibility checks KVM: x86: Move CPU compat checks hook to kvm_x86_ops (from kvm_x86_init_ops) KVM: Ensure CPU is stable during low level hardware enable/disable KVM: Use a per-CPU variable to track which CPUs have enabled virtualization KVM: Register syscore (suspend/resume) ops early in kvm_init() KVM: Opt out of generic hardware enabling on s390 and PPC KVM: Clean up error labels in kvm_init() Documentation/virt/kvm/locking.rst | 25 +- arch/arm64/include/asm/kvm_host.h | 15 +- arch/arm64/include/asm/kvm_mmu.h | 4 +- arch/arm64/kvm/Kconfig | 1 + arch/arm64/kvm/arch_timer.c | 29 +- arch/arm64/kvm/arm.c | 93 +++--- arch/arm64/kvm/mmu.c | 12 +- arch/arm64/kvm/reset.c | 8 +- arch/arm64/kvm/sys_regs.c | 6 +- arch/arm64/kvm/vgic/vgic-init.c | 19 +- arch/arm64/kvm/vmid.c | 6 +- arch/mips/include/asm/kvm_host.h | 3 +- arch/mips/kvm/Kconfig | 1 + arch/mips/kvm/Makefile | 2 +- arch/mips/kvm/callback.c | 14 - arch/mips/kvm/mips.c | 34 +-- arch/mips/kvm/vz.c | 7 +- arch/powerpc/include/asm/kvm_host.h | 3 - arch/powerpc/include/asm/kvm_ppc.h | 1 - arch/powerpc/kvm/book3s.c | 12 +- arch/powerpc/kvm/e500.c | 6 +- arch/powerpc/kvm/e500mc.c | 6 +- arch/powerpc/kvm/powerpc.c | 20 -- arch/riscv/include/asm/kvm_host.h | 7 +- arch/riscv/kvm/Kconfig | 1 + arch/riscv/kvm/main.c | 23 +- arch/riscv/kvm/mmu.c | 12 +- arch/riscv/kvm/vmid.c | 4 +- arch/s390/include/asm/kvm_host.h | 1 - arch/s390/kvm/interrupt.c | 2 +- arch/s390/kvm/kvm-s390.c | 84 +++--- arch/s390/kvm/kvm-s390.h | 2 +- arch/s390/kvm/pci.c | 2 +- arch/s390/kvm/pci.h | 2 +- arch/x86/include/asm/kvm-x86-ops.h | 1 + arch/x86/include/asm/kvm_host.h | 8 +- arch/x86/kvm/Kconfig | 1 + arch/x86/kvm/cpuid.c | 1 + arch/x86/kvm/debugfs.c | 2 + arch/x86/kvm/emulate.c | 1 + arch/x86/kvm/hyperv.c | 1 + arch/x86/kvm/i8254.c | 4 +- arch/x86/kvm/i8259.c | 4 +- arch/x86/kvm/ioapic.c | 1 + arch/x86/kvm/irq.c | 1 + arch/x86/kvm/irq_comm.c | 7 +- arch/x86/kvm/kvm_onhyperv.c | 1 + arch/x86/kvm/lapic.c | 8 +- arch/x86/kvm/mmu/mmu.c | 6 +- arch/x86/kvm/mmu/page_track.c | 1 + arch/x86/kvm/mmu/spte.c | 4 +- arch/x86/kvm/mmu/spte.h | 4 +- arch/x86/kvm/mmu/tdp_iter.c | 1 + arch/x86/kvm/mmu/tdp_mmu.c | 1 + arch/x86/kvm/mtrr.c | 1 + arch/x86/kvm/pmu.c | 1 + arch/x86/kvm/smm.c | 1 + arch/x86/kvm/svm/avic.c | 2 +- arch/x86/kvm/svm/nested.c | 2 +- arch/x86/kvm/svm/pmu.c | 2 + arch/x86/kvm/svm/sev.c | 1 + arch/x86/kvm/svm/svm.c | 89 +++--- arch/x86/kvm/svm/svm_onhyperv.c | 1 + arch/x86/kvm/svm/svm_onhyperv.h | 4 +- arch/x86/kvm/vmx/capabilities.h | 4 +- arch/x86/kvm/vmx/hyperv.c | 1 + arch/x86/kvm/vmx/hyperv.h | 4 +- arch/x86/kvm/vmx/nested.c | 3 +- arch/x86/kvm/vmx/pmu_intel.c | 5 +- arch/x86/kvm/vmx/posted_intr.c | 2 + arch/x86/kvm/vmx/sgx.c | 5 +- arch/x86/kvm/vmx/vmcs12.c | 1 + arch/x86/kvm/vmx/vmx.c | 438 +++++++++++++++------------- arch/x86/kvm/vmx/vmx_ops.h | 4 +- arch/x86/kvm/x86.c | 248 +++++++++------- arch/x86/kvm/xen.c | 1 + include/kvm/arm_arch_timer.h | 6 +- include/kvm/arm_vgic.h | 4 + include/linux/cpuhotplug.h | 5 +- include/linux/kvm_host.h | 13 +- virt/kvm/Kconfig | 3 + virt/kvm/kvm_main.c | 303 ++++++++++--------- 82 files changed, 863 insertions(+), 816 deletions(-) delete mode 100644 arch/mips/kvm/callback.c base-commit: 3e04435fe60590a1c79ec94d60e9897c3ff7d73b -- 2.38.1.584.g0f3c55d4c2-goog _______________________________________________ kvmarm mailing list kvmarm@xxxxxxxxxxxxxxxxxxxxx https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
