On Tue, 15 Nov 2022 22:55:02 +0000,
Oliver Upton <oliver.upton@xxxxxxxxx> wrote:
>
> Marek reported a BUG resulting from the recent parallel faults changes,
> as the hyp stage-1 map walker attempted to allocate table memory while
> holding the RCU read lock:
>
> BUG: sleeping function called from invalid context at
> include/linux/sched/mm.h:274
> in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
> preempt_count: 0, expected: 0
> RCU nest depth: 1, expected: 0
> 2 locks held by swapper/0/1:
> #0: ffff80000a8a44d0 (kvm_hyp_pgd_mutex){+.+.}-{3:3}, at:
> __create_hyp_mappings+0x80/0xc4
> #1: ffff80000a927720 (rcu_read_lock){....}-{1:2}, at:
> kvm_pgtable_walk+0x0/0x1f4
> CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc3+ #5918
> Hardware name: Raspberry Pi 3 Model B (DT)
> Call trace:
> dump_backtrace.part.0+0xe4/0xf0
> show_stack+0x18/0x40
> dump_stack_lvl+0x8c/0xb8
> dump_stack+0x18/0x34
> __might_resched+0x178/0x220
> __might_sleep+0x48/0xa0
> prepare_alloc_pages+0x178/0x1a0
> __alloc_pages+0x9c/0x109c
> alloc_page_interleave+0x1c/0xc4
> alloc_pages+0xec/0x160
> get_zeroed_page+0x1c/0x44
> kvm_hyp_zalloc_page+0x14/0x20
> hyp_map_walker+0xd4/0x134
> kvm_pgtable_visitor_cb.isra.0+0x38/0x5c
> __kvm_pgtable_walk+0x1a4/0x220
> kvm_pgtable_walk+0x104/0x1f4
> kvm_pgtable_hyp_map+0x80/0xc4
> __create_hyp_mappings+0x9c/0xc4
> kvm_mmu_init+0x144/0x1cc
> kvm_arch_init+0xe4/0xef4
> kvm_init+0x3c/0x3d0
> arm_init+0x20/0x30
> do_one_initcall+0x74/0x400
> kernel_init_freeable+0x2e0/0x350
> kernel_init+0x24/0x130
> ret_from_fork+0x10/0x20
>
> Since the hyp stage-1 table walkers are serialized by kvm_hyp_pgd_mutex,
> RCU protection really doesn't add anything. Don't acquire the RCU read
> lock for an exclusive walk. While at it, add a warning which codifies
> the lack of support for shared walks in the hypervisor code.
>
> Reported-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> Signed-off-by: Oliver Upton <oliver.upton@xxxxxxxxx>
> ---
>
> Applies on top of the parallel faults series that was picked up last
> week. Tested with kvm-arm.mode={nvhe,protected} on an Ampere Altra
> system.
>
> v1 -> v2:
> - Took Will's suggestion of conditioning RCU on a flag, small tweak to
> use existing bit instead (Thanks!)
>
> arch/arm64/include/asm/kvm_pgtable.h | 22 ++++++++++++++++------
> arch/arm64/kvm/hyp/pgtable.c | 5 +++--
> 2 files changed, 19 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/include/asm/kvm_pgtable.h b/arch/arm64/include/asm/kvm_pgtable.h
> index a874ce0ce7b5..d4c7321fa652 100644
> --- a/arch/arm64/include/asm/kvm_pgtable.h
> +++ b/arch/arm64/include/asm/kvm_pgtable.h
> @@ -51,8 +51,16 @@ static inline kvm_pte_t *kvm_dereference_pteref(kvm_pteref_t pteref, bool shared
> return pteref;
> }
>
> -static inline void kvm_pgtable_walk_begin(void) {}
> -static inline void kvm_pgtable_walk_end(void) {}
> +static inline void kvm_pgtable_walk_begin(bool shared)
> +{
> + /*
> + * Due to the lack of RCU (or a similar protection scheme), only
> + * non-shared table walkers are allowed in the hypervisor.
> + */
> + WARN_ON(shared);
> +}
> +
> +static inline void kvm_pgtable_walk_end(bool shared) {}
>
> static inline bool kvm_pgtable_walk_lock_held(void)
> {
> @@ -68,14 +76,16 @@ static inline kvm_pte_t *kvm_dereference_pteref(kvm_pteref_t pteref, bool shared
> return rcu_dereference_check(pteref, !shared);
> }
>
> -static inline void kvm_pgtable_walk_begin(void)
> +static inline void kvm_pgtable_walk_begin(bool shared)
I'm not crazy about this sort of parameters. I think it would make a
lot more sense to pass a pointer to the walker structure and do the
flag check inside the helper.
That way, we avoid extra churn if/when we need extra state or
bookkeeping around the walk.
Thanks,
M.
--
Without deviation from the norm, progress is not possible.
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
