Re: [RFC PATCH 04/12] KVM: arm64: Add kvm_pgtable_stage2_split()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Nov 14, 2022 at 08:54:52PM +0000, Oliver Upton wrote:
> Hi Ricardo,
> 
> On Sat, Nov 12, 2022 at 08:17:06AM +0000, Ricardo Koller wrote:
> 
> [...]
> 
> > +/**
> > + * kvm_pgtable_stage2_split() - Split a range of huge pages into leaf PTEs pointing
> > + *				to PAGE_SIZE guest pages.
> > + * @pgt:	Page-table structure initialised by kvm_pgtable_stage2_init*().
> > + * @addr:	Intermediate physical address from which to split.
> > + * @size:	Size of the range.
> > + * @mc:		Cache of pre-allocated and zeroed memory from which to allocate
> > + *		page-table pages.
> > + *
> > + * @addr and the end (@addr + @size) are effectively aligned down and up to
> > + * the top level huge-page block size. This is an exampe using 1GB
> > + * huge-pages and 4KB granules.
> > + *
> > + *                          [---input range---]
> > + *                          :                 :
> > + * [--1G block pte--][--1G block pte--][--1G block pte--][--1G block pte--]
> > + *                          :                 :
> > + *                   [--2MB--][--2MB--][--2MB--][--2MB--]
> > + *                          :                 :
> > + *                   [ ][ ][:][ ][ ][ ][ ][ ][:][ ][ ][ ]
> > + *                          :                 :
> > + *
> > + * Return: 0 on success, negative error code on failure. Note that
> > + * kvm_pgtable_stage2_split() is best effort: it tries to break as many
> > + * blocks in the input range as allowed by the size of the memcache. It
> > + * will fail it wasn't able to break any block.
> > + */
> > +int kvm_pgtable_stage2_split(struct kvm_pgtable *pgt, u64 addr, u64 size, void *mc);
> > +
> >  /**
> >   * kvm_pgtable_walk() - Walk a page-table.
> >   * @pgt:	Page-table structure initialised by kvm_pgtable_*_init().
> > diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c
> > index d1f309128118..9c42eff6d42e 100644
> > --- a/arch/arm64/kvm/hyp/pgtable.c
> > +++ b/arch/arm64/kvm/hyp/pgtable.c
> > @@ -1267,6 +1267,80 @@ static int stage2_create_removed(kvm_pte_t *ptep, u64 phys, u32 level,
> >  	return __kvm_pgtable_visit(&data, mm_ops, ptep, level);
> >  }
> >  
> > +struct stage2_split_data {
> > +	struct kvm_s2_mmu		*mmu;
> > +	void				*memcache;
> > +	struct kvm_pgtable_mm_ops	*mm_ops;
> 
> You can also get at mm_ops through kvm_pgtable_visit_ctx
> 
> > +};
> > +
> > +static int stage2_split_walker(const struct kvm_pgtable_visit_ctx *ctx,
> > +			       enum kvm_pgtable_walk_flags visit)
> > +{
> > +	struct stage2_split_data *data = ctx->arg;
> > +	struct kvm_pgtable_mm_ops *mm_ops = data->mm_ops;
> > +	kvm_pte_t pte = ctx->old, attr, new;
> > +	enum kvm_pgtable_prot prot;
> > +	void *mc = data->memcache;
> > +	u32 level = ctx->level;
> > +	u64 phys;
> > +
> > +	if (WARN_ON_ONCE(kvm_pgtable_walk_shared(ctx)))
> > +		return -EINVAL;
> > +
> > +	/* Nothing to split at the last level */
> > +	if (level == KVM_PGTABLE_MAX_LEVELS - 1)
> > +		return 0;
> > +
> > +	/* We only split valid block mappings */
> > +	if (!kvm_pte_valid(pte) || kvm_pte_table(pte, ctx->level))
> > +		return 0;
> > +
> > +	phys = kvm_pte_to_phys(pte);
> > +	prot = kvm_pgtable_stage2_pte_prot(pte);
> > +	stage2_set_prot_attr(data->mmu->pgt, prot, &attr);
> > +
> > +	/*
> > +	 * Eager page splitting is best-effort, so we can ignore the error.
> > +	 * The returned PTE (new) will be valid even if this call returns
> > +	 * error: new will be a single (big) block PTE.  The only issue is
> > +	 * that it will affect dirty logging performance, as the huge-pages
> > +	 * will have to be split on fault, and so we WARN.
> > +	 */
> > +	WARN_ON(stage2_create_removed(&new, phys, level, attr, mc, mm_ops));
> 
> I don't believe we should warn in this case, at least not
> unconditionally. ENOMEM is an expected outcome, for example.

Given that "eager page splitting" is best-effort, the error must be
ignored somewhere: either here or by the caller (in mmu.c). It seems
that ignoring the error here is not a very good idea.

> 
> Additionally, I believe you'll want to bail out at this point to avoid
> installing a potentially garbage PTE as well.

It should be fine as stage2_create_removed() is also best-effort. The
returned PTE is valid even when it fails; it just returns a big block
PTE.

> 
> > +	stage2_put_pte(ctx, data->mmu, mm_ops);
> 
> Ah, I see why you've relaxed the WARN in patch 1 now.
> 
> I would recommend you follow the break-before-make pattern and use the
> helpers here as well. stage2_try_break_pte() will demote the store to
> WRITE_ONCE() if called from a non-shared context.
> 

ACK, I can do that. The only reason why I didnt' is because I would have
to handle the potential error from stage2_try_break_pte(). It would feel
wrong not to, even if it's !shared. On the other hand, I would like to
easily experiment with both the !shared and the shared approaches
easily.

> Then the WARN will behave as expected in stage2_make_pte().
> 
> > +	/*
> > +	 * Note, the contents of the page table are guaranteed to be made
> > +	 * visible before the new PTE is assigned because
> > +	 * stage2_make__pte() writes the PTE using smp_store_release().
> 
> typo: stage2_make_pte()
> 
> --
> Thanks,
> Oliver
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm



[Index of Archives]     [Linux KVM]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux