Hi Ricardo,
On Wed, Mar 02, 2022 at 09:21:43AM -0800, Ricardo Koller wrote:
> Add an arch_timer edge-cases selftest. For now, just add some basic
> sanity checks, and some stress conditions (like waiting for the timers
> while re-scheduling the vcpu). The next commit will add the actual edge
> case tests.
>
> This test fails without a867e9d0cc1 "KVM: arm64: Don't miss pending
> interrupts for suspended vCPU".
>
Testing timer correctness is extremely challenging to do without
inherent flakiness. I have some concerns about the expectations that a
timer IRQ should fire in a given amount of time, as it is possible to
flake for any number of benign reasons (such as high CPU load in the
host).
While the architecture may suggest that the timer should fire as soon as
CVAL is met:
TimerConditionMet = (((Counter[63:0] – Offset[63:0])[63:0] - CompareValue[63:0]) >= 0)
However, the architecture is extremely imprecise as to when an interrupt
should be taken:
In the absence of a specific requirement to take an interrupt, the
architecture only requires that unmasked pending interrupts are taken
in finite time. [DDI0487G.b D1.13.4 "Prioritization and recognition of
interrupts"]
It seems to me that the only thing we can positively assert is that a
timer interrupt should never be taken early. Now -- I agree that there
is value in testing that the interrupt be taken in bounded time, but its
hard to pick a good value for it.
Perhaps documenting the possibility of flakes in the test is warranted,
along with some knobs to adjust these values for any particularly bad
implementation.
> Reviewed-by: Reiji Watanabe <reijiw@xxxxxxxxxx>
> Reviewed-by: Raghavendra Rao Ananta <rananta@xxxxxxxxxx>
> Signed-off-by: Ricardo Koller <ricarkol@xxxxxxxxxx>
> ---
> tools/testing/selftests/kvm/.gitignore | 1 +
> tools/testing/selftests/kvm/Makefile | 1 +
> .../kvm/aarch64/arch_timer_edge_cases.c | 634 ++++++++++++++++++
> 3 files changed, 636 insertions(+)
> create mode 100644 tools/testing/selftests/kvm/aarch64/arch_timer_edge_cases.c
>
> diff --git a/tools/testing/selftests/kvm/.gitignore b/tools/testing/selftests/kvm/.gitignore
> index dce7de7755e6..8f7e0123dd28 100644
> --- a/tools/testing/selftests/kvm/.gitignore
> +++ b/tools/testing/selftests/kvm/.gitignore
> @@ -1,5 +1,6 @@
> # SPDX-License-Identifier: GPL-2.0-only
> /aarch64/arch_timer
> +/aarch64/arch_timer_edge_cases
> /aarch64/debug-exceptions
> /aarch64/get-reg-list
> /aarch64/psci_cpu_on_test
> diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile
> index 0e4926bc9a58..17a0f32cfc91 100644
> --- a/tools/testing/selftests/kvm/Makefile
> +++ b/tools/testing/selftests/kvm/Makefile
> @@ -101,6 +101,7 @@ TEST_GEN_PROGS_x86_64 += kvm_binary_stats_test
> TEST_GEN_PROGS_x86_64 += system_counter_offset_test
>
> TEST_GEN_PROGS_aarch64 += aarch64/arch_timer
> +TEST_GEN_PROGS_aarch64 += aarch64/arch_timer_edge_cases
> TEST_GEN_PROGS_aarch64 += aarch64/debug-exceptions
> TEST_GEN_PROGS_aarch64 += aarch64/get-reg-list
> TEST_GEN_PROGS_aarch64 += aarch64/psci_cpu_on_test
> diff --git a/tools/testing/selftests/kvm/aarch64/arch_timer_edge_cases.c b/tools/testing/selftests/kvm/aarch64/arch_timer_edge_cases.c
> new file mode 100644
> index 000000000000..48c886bce849
> --- /dev/null
> +++ b/tools/testing/selftests/kvm/aarch64/arch_timer_edge_cases.c
> @@ -0,0 +1,634 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * arch_timer_edge_cases.c - Tests the aarch64 timer IRQ functionality.
> + *
> + * Copyright (c) 2021, Google LLC.
> + */
> +
> +#define _GNU_SOURCE
> +
> +#include <stdlib.h>
> +#include <pthread.h>
> +#include <linux/kvm.h>
> +#include <linux/sizes.h>
> +#include <linux/bitmap.h>
> +#include <sched.h>
> +#include <sys/sysinfo.h>
> +
> +#include "kvm_util.h"
> +#include "processor.h"
> +#include "delay.h"
> +#include "arch_timer.h"
> +#include "gic.h"
> +#include "vgic.h"
> +
> +#define VCPUID 0
> +
> +#define msecs_to_usecs(msec) ((msec) * 1000LL)
> +
> +#define CVAL_MAX ~0ULL
> +/* tval is a signed 32-bit int. */
> +#define TVAL_MAX INT_MAX
> +#define TVAL_MIN INT_MIN
> +
> +#define GICD_BASE_GPA 0x8000000ULL
> +#define GICR_BASE_GPA 0x80A0000ULL
> +
> +/* After how much time we say there is no IRQ. */
> +#define TIMEOUT_NO_IRQ_US msecs_to_usecs(50)
> +
> +/* 1ms sounds a bit excessive, but QEMU-TCG is slow. */
> +#define TEST_MARGIN_US 1000ULL
> +
> +/* A nice counter value to use as the starting one for most tests. */
> +#define DEF_CNT (CVAL_MAX / 2)
> +
> +/* Number of runs. */
> +#define NR_TEST_ITERS_DEF 5
> +
> +/* Shared with IRQ handler. */
> +volatile struct test_vcpu_shared_data {
> + int handled;
> +} shared_data;
> +
> +struct test_args {
> + /* Virtual or physical timer and counter tests. */
> + enum arch_timer timer;
> + /* Number of iterations. */
> + int iterations;
> +};
> +
> +struct test_args test_args = {
> + /* Only testing VIRTUAL timers for now. */
> + .timer = VIRTUAL,
> + .iterations = NR_TEST_ITERS_DEF,
> +};
> +
> +static int vtimer_irq, ptimer_irq;
> +
> +typedef enum sync_cmd {
> + SET_REG_KVM_REG_ARM_TIMER_CNT = 100001,
> + USERSPACE_SCHED_YIELD,
> + USERSPACE_MIGRATE_SELF,
> +} sync_cmd_t;
> +
> +typedef void (*wfi_method_t)(void);
> +
nit: the name suggests to me a WFI in the architectural sense, but it
appears polling is employed in certain implementations. Perhaps call it
wait_method_t?
> +static void wait_for_non_spurious_irq(void);
> +static void wait_poll_for_irq(void);
> +static void wait_sched_poll_for_irq(void);
> +static void wait_migrate_poll_for_irq(void);
> +
> +wfi_method_t wfi_method[] = {
> + wait_for_non_spurious_irq,
> + wait_poll_for_irq,
> + wait_sched_poll_for_irq,
> + wait_migrate_poll_for_irq,
> +};
> +
> +#define for_each_wfi_method(i) \
> + for ((i) = 0; (i) < ARRAY_SIZE(wfi_method); (i)++)
nit: for simple iterators such as this, I would prefer it be open-coded
instead of defined in a macro.
> +typedef enum timer_view {
> + TIMER_CVAL = 1,
nit: do we care about the enumeration value? Same goes for enum
sync_cmd.
> + TIMER_TVAL,
> +} timer_view_t;
nit: drop the typedef and just refer to the enum type explicitly. I'd
recommend this for other enums in this test as well.
> +
> +/* Pair of pcpus for the test to alternate between. */
> +static int pcpus[2] = {-1, -1};
> +static int pcpus_idx;
> +
> +static uint32_t next_pcpu(void)
> +{
> + pcpus_idx = 1 - pcpus_idx;
> + return pcpus[pcpus_idx];
> +}
> +
> +#define ASSERT_IRQS_HANDLED_2(__nr, arg1, arg2) do { \
> + int __h = shared_data.handled; \
> + GUEST_ASSERT_4(__h == (__nr), __h, __nr, arg1, arg2); \
> +} while (0)
> +
> +#define ASSERT_IRQS_HANDLED_1(__nr, arg1) \
> + ASSERT_IRQS_HANDLED_2((__nr), arg1, 0)
> +
> +#define ASSERT_IRQS_HANDLED(__nr) \
> + ASSERT_IRQS_HANDLED_2((__nr), 0, 0)
> +
> +#define TIMER_GET_CTL() \
> + timer_get_ctl(test_args.timer)
> +
> +#define TIMER_SET_CTL(__ctl) \
> + timer_set_ctl(test_args.timer, (__ctl))
> +
> +#define TIMER_SET_CVAL(__cval) \
> + timer_set_cval(test_args.timer, (__cval))
> +
> +#define TIMER_SET_TVAL(__tval) \
> + timer_set_tval(test_args.timer, (__tval))
> +
> +#define TIMER_GET_CVAL() \
> + timer_get_cval(test_args.timer)
> +
> +#define TIMER_GET_TVAL() \
> + timer_get_tval(test_args.timer)
> +
> +#define TIMER_GET_CNTCT() \
> + timer_get_cntct(test_args.timer)
It might be cleaner to avoid these macro indirections and just have the
caller pass test_args.timer on its own. Could use a local variable in
the caller body to avoid referencing the struct every time.
> +#define __SET_COUNTER(__ctr, __t) \
> + GUEST_SYNC_ARGS(SET_REG_KVM_REG_ARM_TIMER_CNT, (__ctr), (__t), 0, 0)
> +
> +#define SET_COUNTER(__ctr) \
> + __SET_COUNTER((__ctr), test_args.timer)
> +
> +#define USERSPACE_CMD(__cmd) \
> + GUEST_SYNC_ARGS(__cmd, 0, 0, 0, 0)
> +
> +#define USERSPACE_SCHEDULE() \
> + USERSPACE_CMD(USERSPACE_SCHED_YIELD)
> +
> +#define USERSPACE_MIGRATE_VCPU() \
> + USERSPACE_CMD(USERSPACE_MIGRATE_SELF)
> +
> +#define IAR_SPURIOUS 1023
> +
how about INTID_SPURIOUS? Also, this is an invariant in the GIC
architecture, so maybe hoist it into the selftests GIC headers.
> +static void guest_irq_handler(struct ex_regs *regs)
> +{
> + unsigned int intid = gic_get_and_ack_irq();
> + uint64_t cnt, cval;
> + uint32_t ctl;
> +
> + GUEST_ASSERT(gic_irq_get_pending(intid));
> +
> + if (intid == IAR_SPURIOUS)
> + return;
> +
> + ctl = TIMER_GET_CTL();
> + cnt = TIMER_GET_CNTCT();
> + cval = TIMER_GET_CVAL();
> +
> + GUEST_ASSERT_1(ctl & CTL_ISTATUS, ctl);
> +
> + /* Disable and mask the timer. */
> + TIMER_SET_CTL(CTL_IMASK);
> + GUEST_ASSERT(!gic_irq_get_pending(intid));
> +
> + shared_data.handled++;
> +
> + GUEST_ASSERT_2(cnt >= cval, cnt, cval);
> +
> + gic_set_eoi(intid);
> +}
> +
> +static void set_cval_irq(uint64_t cval_cycles, uint32_t ctl)
> +{
> + shared_data.handled = 0;
> + TIMER_SET_CVAL(cval_cycles);
> + TIMER_SET_CTL(ctl);
> +}
> +
> +static void set_tval_irq(uint64_t tval_cycles, uint32_t ctl)
> +{
> + shared_data.handled = 0;
> + TIMER_SET_TVAL(tval_cycles);
> + TIMER_SET_CTL(ctl);
> +}
> +
> +static void set_xval_irq(uint64_t xval, uint32_t ctl, timer_view_t tv)
nit: how about program_timer_irq().
> +{
> + switch (tv) {
> + case TIMER_CVAL:
> + set_cval_irq(xval, ctl);
nit: just inline these helpers into the switch statement body.
> + break;
> + case TIMER_TVAL:
> + set_tval_irq(xval, ctl);
> + break;
> + default:
> + GUEST_ASSERT(0);
> + }
> +}
> +
> +/*
> + * Should be called with IRQs masked.
> + *
> + * Note that this can hang forever, so we rely on having a timeout mechanism in
> + * the "runner", like: tools/testing/selftests/kselftest/runner.sh.
> + */
> +static void wait_for_non_spurious_irq(void)
> +{
> + int h;
> +
> + for (h = shared_data.handled; h == shared_data.handled;) {
> + asm volatile("wfi\n"
> + "msr daifclr, #2\n"
> + /* handle IRQ */
> + "msr daifset, #2\n"
> + : : : "memory");
> + }
> +}
> +
> +/*
> + * Wait for an non-spurious IRQ by polling in the guest (userspace=0) or in
> + * userspace (e.g., userspace=1 and userspace_cmd=USERSPACE_SCHED_YIELD).
> + *
> + * Should be called with IRQs masked. Not really needed like the wfi above, but
> + * it should match the others.
> + *
> + * Note that this can hang forever, so we rely on having a timeout mechanism in
> + * the "runner", like: tools/testing/selftests/kselftest/runner.sh.
> + */
> +static void poll_for_non_spurious_irq(bool userspace, sync_cmd_t userspace_cmd)
> +{
> + int h;
> +
> + h = shared_data.handled;
> +
> + local_irq_enable();
> + while (h == shared_data.handled) {
> + if (userspace)
> + USERSPACE_CMD(userspace_cmd);
> + else
> + cpu_relax();
> + }
> + local_irq_disable();
> +}
> +
> +static void wait_poll_for_irq(void)
> +{
> + poll_for_non_spurious_irq(false, -1);
> +}
> +
> +static void wait_sched_poll_for_irq(void)
> +{
> + poll_for_non_spurious_irq(true, USERSPACE_SCHED_YIELD);
> +}
> +
> +static void wait_migrate_poll_for_irq(void)
> +{
> + poll_for_non_spurious_irq(true, USERSPACE_MIGRATE_SELF);
> +}
> +
> +/*
> + * Reset the timer state to some nice values like the counter not being close
> + * to the edge, and the control register masked and disabled.
> + */
> +static void reset_timer_state(uint64_t cnt)
> +{
> + SET_COUNTER(cnt);
> + TIMER_SET_CTL(CTL_IMASK);
> +}
> +
> +static void test_timer_xval(uint64_t xval, timer_view_t tv, wfi_method_t wm,
> + bool reset_state, uint64_t reset_cnt)
> +{
> + local_irq_disable();
> +
> + if (reset_state)
> + reset_timer_state(reset_cnt);
> +
> + set_xval_irq(xval, CTL_ENABLE, tv);
> + wm();
> +
> + ASSERT_IRQS_HANDLED_2(1, tv, wm);
Printing the function pointer probably isn't too helpful w/o inspecting
the binary.
> + local_irq_enable();
> +}
> +
> +/*
> + * The test_timer_* functions will program the timer, wait for it, and assert
> + * the firing of the correct IRQ.
> + *
> + * These functions don't have a timeout and return as soon as they receive an
> + * IRQ. They can hang (forever), so we rely on having a timeout mechanism in
> + * the "runner", like: tools/testing/selftests/kselftest/runner.sh.
> + */
Lift the hang commentary into the top-level comment
> +static void test_timer_cval(uint64_t cval, wfi_method_t wm, bool reset_state,
> + uint64_t reset_cnt)
> +{
> + test_timer_xval(cval, TIMER_CVAL, wm, reset_state, reset_cnt);
> +}
> +
> +static void test_timer_tval(int32_t tval, wfi_method_t wm, bool reset_state,
> + uint64_t reset_cnt)
> +{
> + test_timer_xval((uint64_t)tval, TIMER_TVAL, wm, reset_state, reset_cnt);
> +}
> +
> +static void test_basic_functionality(void)
> +{
> + int32_t tval = (int32_t)msec_to_cycles(10);
> + uint64_t cval;
> + int i;
> +
> + for_each_wfi_method(i) {
> + wfi_method_t wm = wfi_method[i];
> +
> + cval = DEF_CNT + msec_to_cycles(10);
> +
> + test_timer_cval(cval, wm, true, DEF_CNT);
> + test_timer_tval(tval, wm, true, DEF_CNT);
> + }
> +}
> +
> +/*
> + * This test checks basic timer behavior without actually firing timers, things
> + * like: the relationship between cval and tval, tval down-counting.
> + */
> +static void timers_sanity_checks(bool use_sched)
> +{
> + reset_timer_state(DEF_CNT);
> +
> + local_irq_disable();
> +
> + /* cval in the past */
> + TIMER_SET_CVAL(TIMER_GET_CNTCT() - msec_to_cycles(10));
> + if (use_sched)
> + USERSPACE_SCHEDULE();
> + GUEST_ASSERT(TIMER_GET_TVAL() < 0);
> +
> + /* tval in the past */
> + TIMER_SET_TVAL(-1);
> + if (use_sched)
> + USERSPACE_SCHEDULE();
> + GUEST_ASSERT(TIMER_GET_CVAL() < TIMER_GET_CNTCT());
> +
> + /* tval larger than TVAL_MAX. */
> + TIMER_SET_CVAL(TIMER_GET_CNTCT() + TVAL_MAX + msec_to_cycles(10));
> + if (use_sched)
> + USERSPACE_SCHEDULE();
> + GUEST_ASSERT(TIMER_GET_TVAL() <= 0);
> +
> + /*
> + * tval larger than 2 * TVAL_MAX.
> + * Twice the TVAL_MAX completely loops around the TVAL.
> + */
> + TIMER_SET_CVAL(TIMER_GET_CNTCT() + 2ULL * TVAL_MAX + msec_to_cycles(10));
> + if (use_sched)
> + USERSPACE_SCHEDULE();
> + GUEST_ASSERT_1(TIMER_GET_TVAL() <= msec_to_cycles(10), TIMER_GET_TVAL());
> +
> + /* negative tval that rollovers from 0. */
> + SET_COUNTER(msec_to_cycles(1));
> + TIMER_SET_TVAL(-1 * msec_to_cycles(10));
> + if (use_sched)
> + USERSPACE_SCHEDULE();
> + GUEST_ASSERT(TIMER_GET_CVAL() >= (CVAL_MAX - msec_to_cycles(9)));
> +
> + /* tval should keep down-counting from 0 to -1. */
> + TIMER_SET_TVAL(0);
> + /* We just need 1 cycle to pass. */
> + isb();
> + GUEST_ASSERT(TIMER_GET_TVAL() < 0);
> +
> + local_irq_enable();
> +
> + /* Mask and disable any pending timer. */
> + TIMER_SET_CTL(CTL_IMASK);
> +}
There are instances of not-so-sane Generic Timers, such as the XGene-1
that probably won't be fun to test. Marc would know more about this, but
there may need to be a denylist of bad implementations.
> +static void test_timers_sanity_checks(void)
> +{
> + timers_sanity_checks(false);
> + /* Check how KVM saves/restores these edge-case values. */
> + timers_sanity_checks(true);
> +}
> +
> +static void guest_run_iteration(void)
> +{
> + test_basic_functionality();
> + test_timers_sanity_checks();
> +}
> +
> +static void guest_code(void)
> +{
> + int i;
> +
> + local_irq_disable();
> +
> + gic_init(GIC_V3, 1, (void *)GICD_BASE_GPA, (void *)GICR_BASE_GPA);
> +
> + TIMER_SET_CTL(CTL_IMASK);
> + timer_set_ctl(PHYSICAL, CTL_IMASK);
> +
> + gic_irq_enable(vtimer_irq);
> + gic_irq_enable(ptimer_irq);
> + local_irq_enable();
> +
> + for (i = 0; i < test_args.iterations; i++) {
> + GUEST_SYNC(i);
> + guest_run_iteration();
> + }
> +
> + GUEST_DONE();
> +}
> +
> +static void migrate_self(uint32_t new_pcpu)
> +{
> + int ret;
> + cpu_set_t cpuset;
> + pthread_t thread;
> +
> + thread = pthread_self();
> +
> + CPU_ZERO(&cpuset);
> + CPU_SET(new_pcpu, &cpuset);
> +
> + pr_debug("Migrating from %u to %u\n", sched_getcpu(), new_pcpu);
> +
> + ret = pthread_setaffinity_np(thread, sizeof(cpuset), &cpuset);
> +
> + TEST_ASSERT(ret == 0, "Failed to migrate to pCPU: %u; ret: %d\n",
> + new_pcpu, ret);
> +}
> +
> +/*
> + * Set the two pcpus that the test will use to alternate between. Default to
> + * use the current cpu as pcpus[0] and the one right after in the affinity set
> + * as pcpus[1].
> + */
> +static void set_default_pcpus(void)
> +{
> + int max = get_nprocs();
> + int curr = sched_getcpu();
> + cpu_set_t cpuset;
> + long i;
> +
> + TEST_ASSERT(max > 1, "Need at least 2 online pcpus.");
Should the test skip (instead of fail) on such a precondition?
> + pcpus[0] = curr;
> +
> + sched_getaffinity(getpid(), sizeof(cpu_set_t), &cpuset);
> + for (i = (curr + 1) % CPU_SETSIZE; i != curr; i = (i + 1) % CPU_SETSIZE) {
> + if (CPU_ISSET(i, &cpuset)) {
> + pcpus[1] = i;
> + break;
> + }
> + }
> +
> + TEST_ASSERT(pcpus[1] != -1, "Couldn't find a second pcpu.");
> + pr_debug("pcpus: %d %d\n", pcpus[0], pcpus[1]);
> +}
> +
> +static void kvm_set_cntxct(struct kvm_vm *vm, uint64_t cnt, enum arch_timer timer)
> +{
> + TEST_ASSERT(timer == VIRTUAL,
> + "Only supports setting the virtual counter for now.");
> +
> + struct kvm_one_reg reg = {
> + .id = KVM_REG_ARM_TIMER_CNT,
> + .addr = (uint64_t)&cnt,
> + };
> + vcpu_set_reg(vm, 0, ®);
> +}
> +
> +static void handle_sync(struct kvm_vm *vm, struct ucall *uc)
> +{
> + sync_cmd_t cmd = uc->args[1];
> + uint64_t val = uc->args[2];
> + enum arch_timer timer = uc->args[3];
> +
> + switch (cmd) {
> + case SET_REG_KVM_REG_ARM_TIMER_CNT:
> + kvm_set_cntxct(vm, val, timer);
> + break;
> + case USERSPACE_SCHED_YIELD:
> + sched_yield();
> + break;
> + case USERSPACE_MIGRATE_SELF:
> + migrate_self(next_pcpu());
> + break;
> + default:
> + break;
> + }
> +}
> +
> +static void test_run(struct kvm_vm *vm)
> +{
> + struct ucall uc;
> + int stage = 0;
> +
> + /* Start on the first pcpu. */
> + migrate_self(pcpus[0]);
> +
> + sync_global_to_guest(vm, test_args);
> +
> + for (stage = 0; ; stage++) {
> + vcpu_run(vm, VCPUID);
> + switch (get_ucall(vm, VCPUID, &uc)) {
> + case UCALL_SYNC:
> + handle_sync(vm, &uc);
> + break;
> + case UCALL_DONE:
> + goto out;
> + case UCALL_ABORT:
> + TEST_FAIL("%s at %s:%ld\n\tvalues: %lu, %lu; %lu",
> + (const char *)uc.args[0], __FILE__, uc.args[1],
> + uc.args[2], uc.args[3], uc.args[4]);
> + goto out;
> + default:
> + TEST_FAIL("Unexpected guest exit\n");
> + }
> + }
> +
> +out:
> + return;
> +}
> +
> +static void test_init_timer_irq(struct kvm_vm *vm)
> +{
> + int vcpu_fd = vcpu_get_fd(vm, VCPUID);
> +
> + kvm_device_access(vcpu_fd, KVM_ARM_VCPU_TIMER_CTRL,
> + KVM_ARM_VCPU_TIMER_IRQ_PTIMER, &ptimer_irq, false);
> + kvm_device_access(vcpu_fd, KVM_ARM_VCPU_TIMER_CTRL,
> + KVM_ARM_VCPU_TIMER_IRQ_VTIMER, &vtimer_irq, false);
> +
> + sync_global_to_guest(vm, ptimer_irq);
> + sync_global_to_guest(vm, vtimer_irq);
> +
> + pr_debug("ptimer_irq: %d; vtimer_irq: %d\n", ptimer_irq, vtimer_irq);
> +}
> +
> +static struct kvm_vm *test_vm_create(void)
> +{
> + struct kvm_vm *vm;
> +
> + vm = vm_create_default(VCPUID, 0, guest_code);
> +
> + vm_init_descriptor_tables(vm);
> + vm_install_exception_handler(vm, VECTOR_IRQ_CURRENT, guest_irq_handler);
> +
> + vcpu_init_descriptor_tables(vm, 0);
> +
> + ucall_init(vm, NULL);
> + test_init_timer_irq(vm);
> + vgic_v3_setup(vm, 1, 64, GICD_BASE_GPA, GICR_BASE_GPA);
The test should probably skip if GICv3 isn't supported, like commit 456f89e0928a
("KVM: selftests: aarch64: Skip tests if we can't create a vgic-v3")
> + return vm;
> +}
> +
> +static void test_print_help(char *name)
> +{
> + pr_info("Usage: %s [-h] [-i iterations] [-w] [-p pcpu1,pcpu2]\n",
> + name);
> + pr_info("\t-i: Number of iterations (default: %u)\n",
> + NR_TEST_ITERS_DEF);
> + pr_info("\t-p: Pair of pcpus for the vcpus to alternate between. "
> + "Defaults to use the current cpu and the one right after "
> + "in the affinity set.\n");
> + pr_info("\t-h: Print this help message\n");
> +}
> +
> +static bool parse_args(int argc, char *argv[])
> +{
> + int opt, ret;
> +
> + while ((opt = getopt(argc, argv, "hi:p:")) != -1) {
> + switch (opt) {
> + case 'i':
> + test_args.iterations = atoi(optarg);
> + if (test_args.iterations <= 0) {
> + pr_info("Positive value needed for -i\n");
> + goto err;
> + }
> + break;
> + case 'p':
> + ret = sscanf(optarg, "%u,%u", &pcpus[0], &pcpus[1]);
> + if (ret != 2) {
> + pr_info("Invalid pcpus pair");
> + goto err;
> + }
> + break;
> + case 'h':
> + default:
> + goto err;
> + }
> + }
> +
> + return true;
> +
> +err:
> + test_print_help(argv[0]);
> + return false;
> +}
> +
> +int main(int argc, char *argv[])
> +{
> + struct kvm_vm *vm;
> +
> + /* Tell stdout not to buffer its content */
> + setbuf(stdout, NULL);
> +
> + if (!parse_args(argc, argv))
> + exit(KSFT_SKIP);
> +
> + if (pcpus[0] == -1 || pcpus[1] == -1)
> + set_default_pcpus();
> +
> + vm = test_vm_create();
> + test_run(vm);
> + kvm_vm_free(vm);
> +
> + return 0;
> +}
> --
> 2.35.1.574.g5d30c73bfb-goog
>
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
