[PATCH v2 2/5] KVM: arm64: Reject stub hypercalls after pKVM has been initialised

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The stub hypercalls provide mechanisms to reset and replace the EL2 code,
so uninstall them once pKVM has been initialised in order to ensure the
integrity of the hypervisor code.

To ensure pKVM initialisation remains functional, split cpu_hyp_reinit()
into two helper functions to separate usage of the stub from usage of
pkvm hypercalls either side of __pkvm_init on the boot CPU.

Cc: Marc Zyngier <maz@xxxxxxxxxx>
Reviewed-by: Quentin Perret <qperret@xxxxxxxxxx>
Signed-off-by: Will Deacon <will@xxxxxxxxxx>
---
 arch/arm64/kvm/arm.c           | 31 +++++++++++++++++++++++--------
 arch/arm64/kvm/hyp/nvhe/host.S | 26 +++++++++++++++++---------
 2 files changed, 40 insertions(+), 17 deletions(-)

diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index fe102cd2e518..9506cf88fa0e 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -1579,25 +1579,33 @@ static void cpu_set_hyp_vector(void)
 		kvm_call_hyp_nvhe(__pkvm_cpu_set_vector, data->slot);
 }
 
-static void cpu_hyp_reinit(void)
+static void cpu_hyp_init_context(void)
 {
 	kvm_init_host_cpu_context(&this_cpu_ptr_hyp_sym(kvm_host_data)->host_ctxt);
 
-	cpu_hyp_reset();
-
-	if (is_kernel_in_hyp_mode())
-		kvm_timer_init_vhe();
-	else
+	if (!is_kernel_in_hyp_mode())
 		cpu_init_hyp_mode();
+}
 
+static void cpu_hyp_init_features(void)
+{
 	cpu_set_hyp_vector();
-
 	kvm_arm_init_debug();
 
+	if (is_kernel_in_hyp_mode())
+		kvm_timer_init_vhe();
+
 	if (vgic_present)
 		kvm_vgic_init_cpu_hardware();
 }
 
+static void cpu_hyp_reinit(void)
+{
+	cpu_hyp_reset();
+	cpu_hyp_init_context();
+	cpu_hyp_init_features();
+}
+
 static void _kvm_arch_hardware_enable(void *discard)
 {
 	if (!__this_cpu_read(kvm_arm_hardware_enabled)) {
@@ -1788,10 +1796,17 @@ static int do_pkvm_init(u32 hyp_va_bits)
 	int ret;
 
 	preempt_disable();
-	hyp_install_host_vector();
+	cpu_hyp_init_context();
 	ret = kvm_call_hyp_nvhe(__pkvm_init, hyp_mem_base, hyp_mem_size,
 				num_possible_cpus(), kern_hyp_va(per_cpu_base),
 				hyp_va_bits);
+	cpu_hyp_init_features();
+
+	/*
+	 * The stub hypercalls are now disabled, so set our local flag to
+	 * prevent a later re-init attempt in kvm_arch_hardware_enable().
+	 */
+	__this_cpu_write(kvm_arm_hardware_enabled, 1);
 	preempt_enable();
 
 	return ret;
diff --git a/arch/arm64/kvm/hyp/nvhe/host.S b/arch/arm64/kvm/hyp/nvhe/host.S
index 4b652ffb591d..0c6116d34e18 100644
--- a/arch/arm64/kvm/hyp/nvhe/host.S
+++ b/arch/arm64/kvm/hyp/nvhe/host.S
@@ -110,17 +110,14 @@ SYM_FUNC_START(__hyp_do_panic)
 	b	__host_enter_for_panic
 SYM_FUNC_END(__hyp_do_panic)
 
-.macro host_el1_sync_vect
-	.align 7
-.L__vect_start\@:
-	stp	x0, x1, [sp, #-16]!
-	mrs	x0, esr_el2
-	lsr	x0, x0, #ESR_ELx_EC_SHIFT
-	cmp	x0, #ESR_ELx_EC_HVC64
-	b.ne	__host_exit
-
+SYM_FUNC_START(__host_hvc)
 	ldp	x0, x1, [sp]		// Don't fixup the stack yet
 
+	/* No stub for you, sonny Jim */
+alternative_if ARM64_KVM_PROTECTED_MODE
+	b	__host_exit
+alternative_else_nop_endif
+
 	/* Check for a stub HVC call */
 	cmp	x0, #HVC_STUB_HCALL_NR
 	b.hs	__host_exit
@@ -137,6 +134,17 @@ SYM_FUNC_END(__hyp_do_panic)
 	ldr	x5, =__kvm_handle_stub_hvc
 	hyp_pa	x5, x6
 	br	x5
+SYM_FUNC_END(__host_hvc)
+
+.macro host_el1_sync_vect
+	.align 7
+.L__vect_start\@:
+	stp	x0, x1, [sp, #-16]!
+	mrs	x0, esr_el2
+	lsr	x0, x0, #ESR_ELx_EC_SHIFT
+	cmp	x0, #ESR_ELx_EC_HVC64
+	b.eq	__host_hvc
+	b	__host_exit
 .L__vect_end\@:
 .if ((.L__vect_end\@ - .L__vect_start\@) > 0x80)
 	.error "host_el1_sync_vect larger than vector entry"
-- 
2.33.0.800.g4c38ced690-goog

_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm



[Index of Archives]     [Linux KVM]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux