Implement a simple library to perform vGIC-v3 setup from a host point of view. This includes creating a vGIC device, setting up distributor and redistributor attributes, and mapping the guest physical addresses. The definition of REDIST_REGION_ATTR_ADDR is taken from aarch64/vgic_init test. Hence, replace the definition by including vgic.h in the test file. Signed-off-by: Raghavendra Rao Ananta <rananta@xxxxxxxxxx> Reviewed-by: Ricardo Koller <ricarkol@xxxxxxxxxx> Reviewed-by: Andrew Jones <drjones@xxxxxxxxxx> --- tools/testing/selftests/kvm/Makefile | 2 +- .../testing/selftests/kvm/aarch64/vgic_init.c | 3 +- .../selftests/kvm/include/aarch64/vgic.h | 20 ++++++ .../testing/selftests/kvm/lib/aarch64/vgic.c | 70 +++++++++++++++++++ 4 files changed, 92 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/kvm/include/aarch64/vgic.h create mode 100644 tools/testing/selftests/kvm/lib/aarch64/vgic.c diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index 5476a8ddef60..8342f65c1d96 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -35,7 +35,7 @@ endif LIBKVM = lib/assert.c lib/elf.c lib/io.c lib/kvm_util.c lib/rbtree.c lib/sparsebit.c lib/test_util.c lib/guest_modes.c lib/perf_test_util.c LIBKVM_x86_64 = lib/x86_64/apic.c lib/x86_64/processor.c lib/x86_64/vmx.c lib/x86_64/svm.c lib/x86_64/ucall.c lib/x86_64/handlers.S -LIBKVM_aarch64 = lib/aarch64/processor.c lib/aarch64/ucall.c lib/aarch64/handlers.S lib/aarch64/spinlock.c lib/aarch64/gic.c lib/aarch64/gic_v3.c +LIBKVM_aarch64 = lib/aarch64/processor.c lib/aarch64/ucall.c lib/aarch64/handlers.S lib/aarch64/spinlock.c lib/aarch64/gic.c lib/aarch64/gic_v3.c lib/aarch64/vgic.c LIBKVM_s390x = lib/s390x/processor.c lib/s390x/ucall.c lib/s390x/diag318_test_handler.c TEST_GEN_PROGS_x86_64 = x86_64/cr4_cpuid_sync_test diff --git a/tools/testing/selftests/kvm/aarch64/vgic_init.c b/tools/testing/selftests/kvm/aarch64/vgic_init.c index 623f31a14326..157fc24f39c5 100644 --- a/tools/testing/selftests/kvm/aarch64/vgic_init.c +++ b/tools/testing/selftests/kvm/aarch64/vgic_init.c @@ -13,11 +13,10 @@ #include "test_util.h" #include "kvm_util.h" #include "processor.h" +#include "vgic.h" #define NR_VCPUS 4 -#define REDIST_REGION_ATTR_ADDR(count, base, flags, index) (((uint64_t)(count) << 52) | \ - ((uint64_t)((base) >> 16) << 16) | ((uint64_t)(flags) << 12) | index) #define REG_OFFSET(vcpu, offset) (((uint64_t)vcpu << 32) | offset) #define GICR_TYPER 0x8 diff --git a/tools/testing/selftests/kvm/include/aarch64/vgic.h b/tools/testing/selftests/kvm/include/aarch64/vgic.h new file mode 100644 index 000000000000..0ecfb253893c --- /dev/null +++ b/tools/testing/selftests/kvm/include/aarch64/vgic.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * ARM Generic Interrupt Controller (GIC) host specific defines + */ + +#ifndef SELFTEST_KVM_VGIC_H +#define SELFTEST_KVM_VGIC_H + +#include <linux/kvm.h> + +#define REDIST_REGION_ATTR_ADDR(count, base, flags, index) \ + (((uint64_t)(count) << 52) | \ + ((uint64_t)((base) >> 16) << 16) | \ + ((uint64_t)(flags) << 12) | \ + index) + +int vgic_v3_setup(struct kvm_vm *vm, unsigned int nr_vcpus, + uint64_t gicd_base_gpa, uint64_t gicr_base_gpa); + +#endif /* SELFTEST_KVM_VGIC_H */ diff --git a/tools/testing/selftests/kvm/lib/aarch64/vgic.c b/tools/testing/selftests/kvm/lib/aarch64/vgic.c new file mode 100644 index 000000000000..b9b271ff520d --- /dev/null +++ b/tools/testing/selftests/kvm/lib/aarch64/vgic.c @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ARM Generic Interrupt Controller (GIC) v3 host support + */ + +#include <linux/kvm.h> +#include <linux/sizes.h> +#include <asm/kvm.h> + +#include "kvm_util.h" +#include "../kvm_util_internal.h" +#include "vgic.h" + +/* + * vGIC-v3 default host setup + * + * Input args: + * vm - KVM VM + * nr_vcpus - Number of vCPUs supported by this VM + * gicd_base_gpa - Guest Physical Address of the Distributor region + * gicr_base_gpa - Guest Physical Address of the Redistributor region + * + * Output args: None + * + * Return: GIC file-descriptor or negative error code upon failure + * + * The function creates a vGIC-v3 device and maps the distributor and + * redistributor regions of the guest. Since it depends on the number of + * vCPUs for the VM, it must be called after all the vCPUs have been created. + */ +int vgic_v3_setup(struct kvm_vm *vm, unsigned int nr_vcpus, + uint64_t gicd_base_gpa, uint64_t gicr_base_gpa) +{ + int gic_fd; + uint64_t redist_attr; + struct list_head *iter; + unsigned int nr_gic_pages, nr_vcpus_created = 0; + + TEST_ASSERT(nr_vcpus, "Number of vCPUs cannot be empty\n"); + + /* + * Make sure that the caller is infact calling this + * function after all the vCPUs are added. + */ + list_for_each(iter, &vm->vcpus) + nr_vcpus_created++; + TEST_ASSERT(nr_vcpus == nr_vcpus_created, + "Number of vCPUs requested (%u) doesn't match with the ones created for the VM (%u)\n", + nr_vcpus, nr_vcpus_created); + + /* Distributor setup */ + gic_fd = kvm_create_device(vm, KVM_DEV_TYPE_ARM_VGIC_V3, false); + kvm_device_access(gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, + KVM_VGIC_V3_ADDR_TYPE_DIST, &gicd_base_gpa, true); + nr_gic_pages = vm_calc_num_guest_pages(vm->mode, KVM_VGIC_V3_DIST_SIZE); + virt_map(vm, gicd_base_gpa, gicd_base_gpa, nr_gic_pages); + + /* Redistributor setup */ + redist_attr = REDIST_REGION_ATTR_ADDR(nr_vcpus, gicr_base_gpa, 0, 0); + kvm_device_access(gic_fd, KVM_DEV_ARM_VGIC_GRP_ADDR, + KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION, &redist_attr, true); + nr_gic_pages = vm_calc_num_guest_pages(vm->mode, + KVM_VGIC_V3_REDIST_SIZE * nr_vcpus); + virt_map(vm, gicr_base_gpa, gicr_base_gpa, nr_gic_pages); + + kvm_device_access(gic_fd, KVM_DEV_ARM_VGIC_GRP_CTRL, + KVM_DEV_ARM_VGIC_CTRL_INIT, NULL, true); + + return gic_fd; +} -- 2.33.0.309.g3052b89438-goog _______________________________________________ kvmarm mailing list kvmarm@xxxxxxxxxxxxxxxxxxxxx https://lists.cs.columbia.edu/mailman/listinfo/kvmarm