Hi Andre,
Thanks for having a look!
On 7/12/21 5:52 PM, Andre Przywara wrote:
> On Fri, 2 Jul 2021 17:31:20 +0100
> Alexandru Elisei <alexandru.elisei@xxxxxxx> wrote:
>
> Hi Alex,
>
>> Modify run_tests.sh to use kvmtool instead of qemu to run tests when
>> kvm-unit-tests has been configured with --target=kvmtool.
>>
>> Example invocation:
>>
>> $ ./configure --target=kvmtool
>> $ make clean && make
>> $ ./run_scripts.sh
>>
>> A custom location for the kvmtool binary can be set using the environment
>> variable KVMTOOL:
>>
>> $ KVMTOOL=/path/to/kvmtool/binary ./run_scripts.sh
>>
>> Standalone test support is absent, but will be added in subsequent patches.
> So I skimmed over this, and it's at least better than what I had tried
> a few years back ;-)
> And while there might be other ways to sort out command line
> differences between the two, this fixup_kvmtool_opts() looks like a
> clever solution to the problem.
>
> The only problem with this patch is that it's rather big, I wonder if
> this could be split up? For instance move any QEMU specific
> functionality into separate functions first (like run_test_qemu()),
> also use 'if [ "$TARGET" = "qemu" ]' in this first (or second?) patch.
> Then later on just add the kvmtool specifics.
You're right, this patch looks very big and difficult to review, it needs to be
split into smaller chunks for the next iteration.
Drew, did you manage to take a quick look at this patch? Do you think this is the
right direction? I would prefer to hear your opinion about it before I start
reworking it.
Thanks,
Alex
>
> Cheers,
> Andre
>
>> Signed-off-by: Alexandru Elisei <alexandru.elisei@xxxxxxx>
>> ---
>> scripts/arch-run.bash | 48 ++++++++++++++++--
>> scripts/runtime.bash | 94 ++++++++++++++++++++++++++++------
>> scripts/mkstandalone.sh | 5 ++
>> arm/run | 110 ++++++++++++++++++++++++----------------
>> run_tests.sh | 11 +++-
>> 5 files changed, 204 insertions(+), 64 deletions(-)
>>
>> diff --git a/scripts/arch-run.bash b/scripts/arch-run.bash
>> index 8ceed53ed7f8..b916b0e79aca 100644
>> --- a/scripts/arch-run.bash
>> +++ b/scripts/arch-run.bash
>> @@ -69,16 +69,39 @@ run_qemu ()
>> return $ret
>> }
>>
>> +run_kvmtool()
>> +{
>> + local stdout errors ret sig
>> +
>> + # kvmtool doesn't allow an initrd argument with --firmware, but configure
>> + # sets CONFIG_ERRATA_FORCE in lib/config.h for the kvmtool target.
>> +
>> + # stdout to {stdout}, stderr to $errors and stderr
>> + exec {stdout}>&1
>> + errors=$("${@}" </dev/null 2> >(tee /dev/stderr) > /dev/fd/$stdout)
>> + ret=$?
>> + exec {stdout}>&-
>> +
>> + # ret=0 success, everything else is failure.
>> + return $ret
>> +}
>> +
>> run_test_status ()
>> {
>> - local stdout ret
>> + local stdout ret exit_status
>>
>> exec {stdout}>&1
>> - lines=$(run_qemu "$@" > >(tee /dev/fd/$stdout))
>> + if [ "$TARGET" = "kvmtool" ]; then
>> + lines=$(run_kvmtool "$@" > >(tee /dev/fd/$stdout))
>> + exit_status=0
>> + else
>> + lines=$(run_qemu "$@" > >(tee /dev/fd/$stdout))
>> + exit_status=1
>> + fi
>> ret=$?
>> exec {stdout}>&-
>>
>> - if [ $ret -eq 1 ]; then
>> + if [ $ret -eq $exit_status ]; then
>> testret=$(grep '^EXIT: ' <<<"$lines" | sed 's/.*STATUS=\([0-9][0-9]*\).*/\1/')
>> if [ "$testret" ]; then
>> if [ $testret -eq 1 ]; then
>> @@ -193,6 +216,25 @@ search_qemu_binary ()
>> export PATH=$save_path
>> }
>>
>> +search_kvmtool_binary ()
>> +{
>> + local lkvm kvmtool
>> +
>> + for lkvm in ${KVMTOOL:-lkvm vm lkvm-static}; do
>> + if $lkvm --help 2>/dev/null | grep -q 'The most commonly used'; then
>> + kvmtool="$lkvm"
>> + break
>> + fi
>> + done
>> +
>> + if [ -z "$kvmtool" ]; then
>> + echo "A kvmtool binary was not found." >&2
>> + echo "You can set a custom location by using the KVMTOOL=<path> environment variable." >&2
>> + return 2
>> + fi
>> + command -v $kvmtool
>> +}
>> +
>> initrd_create ()
>> {
>> if [ "$ENVIRON_DEFAULT" = "yes" ]; then
>> diff --git a/scripts/runtime.bash b/scripts/runtime.bash
>> index 132389c7dd59..23b238a6ab6f 100644
>> --- a/scripts/runtime.bash
>> +++ b/scripts/runtime.bash
>> @@ -12,14 +12,19 @@ extract_summary()
>> tail -3 | grep '^SUMMARY: ' | sed 's/^SUMMARY: /(/;s/'"$cr"'\{0,1\}$/)/'
>> }
>>
>> -# We assume that QEMU is going to work if it tried to load the kernel
>> +# We assume that QEMU/kvmtool is going to work if it tried to load the kernel
>> premature_failure()
>> {
>> local log="$(eval $(get_cmdline _NO_FILE_4Uhere_) 2>&1)"
>>
>> - echo "$log" | grep "_NO_FILE_4Uhere_" |
>> - grep -q -e "could not \(load\|open\) kernel" -e "error loading" &&
>> - return 1
>> + if [ "$TARGET" = "kvmtool" ]; then
>> + echo "$log" | grep "Fatal: unable to load firmware image _NO_FILE_4Uhere_" &&
>> + return 1
>> + else
>> + echo "$log" | grep "_NO_FILE_4Uhere_" |
>> + grep -q -e "could not \(load\|open\) kernel" -e "error loading" &&
>> + return 1
>> + fi
>>
>> RUNTIME_log_stderr <<< "$log"
>>
>> @@ -30,7 +35,14 @@ premature_failure()
>> get_cmdline()
>> {
>> local kernel=$1
>> - echo "TESTNAME=$testname TIMEOUT=$timeout ACCEL=$accel $RUNTIME_arch_run $kernel -smp $smp $opts"
>> + local smp_param
>> +
>> + if [ "$TARGET" = "kvmtool" ]; then
>> + smp_param="--cpus $smp"
>> + else
>> + smp_param="-smp $smp"
>> + fi
>> + echo "TESTNAME=$testname TIMEOUT=$timeout ACCEL=$accel $RUNTIME_arch_run $kernel $smp_param $opts"
>> }
>>
>> skip_nodefault()
>> @@ -70,6 +82,35 @@ function find_word()
>> grep -Fq " $1 " <<< " $2 "
>> }
>>
>> +fixup_kvmtool_opts()
>> +{
>> + local opts=$1
>> + local groups=$2
>> + local gic
>> + local gic_version
>> +
>> + if find_word "pmu" $groups; then
>> + opts+=" --pmu"
>> + fi
>> +
>> + if find_word "its" $groups; then
>> + gic_version=3
>> + gic="gicv3-its"
>> + elif [[ "$opts" =~ -machine\ *gic-version=(2|3) ]]; then
>> + gic_version="${BASH_REMATCH[1]}"
>> + gic="gicv$gic_version"
>> + fi
>> +
>> + if [ -n "$gic" ]; then
>> + opts=${opts/-machine gic-version=$gic_version/}
>> + opts+=" --irqchip=$gic"
>> + fi
>> +
>> + opts=${opts/-append/--params}
>> +
>> + echo "$opts"
>> +}
>> +
>> function run()
>> {
>> local testname="$1"
>> @@ -105,7 +146,12 @@ function run()
>> return 2
>> fi
>>
>> - if [ -n "$accel" ] && [ -n "$ACCEL" ] && [ "$accel" != "$ACCEL" ]; then
>> + if [ "$TARGET" = "kvmtool" ]; then
>> + if [ -n "$accel" ] && [ "$accel" != "kvm" ]; then
>> + print_result "SKIP" $testname "" "$accel not supported by kvmtool"
>> + return 2
>> + fi
>> + elif [ -n "$accel" ] && [ -n "$ACCEL" ] && [ "$accel" != "$ACCEL" ]; then
>> print_result "SKIP" $testname "" "$accel only, but ACCEL=$ACCEL"
>> return 2
>> elif [ -n "$ACCEL" ]; then
>> @@ -126,6 +172,10 @@ function run()
>> done
>> fi
>>
>> + if [ "$TARGET" = "kvmtool" ]; then
>> + opts=$(fixup_kvmtool_opts "$opts" "$groups")
>> + fi
>> +
>> last_line=$(premature_failure > >(tail -1)) && {
>> print_result "SKIP" $testname "" "$last_line"
>> return 77
>> @@ -165,13 +215,25 @@ function run()
>> #
>> # Probe for MAX_SMP, in case it's less than the number of host cpus.
>> #
>> -# This probing currently only works for ARM, as x86 bails on another
>> -# error first. Also, this probing isn't necessary for any ARM hosts
>> -# running kernels later than v4.3, i.e. those including ef748917b52
>> -# "arm/arm64: KVM: Remove 'config KVM_ARM_MAX_VCPUS'". So, at some
>> -# point when maintaining the while loop gets too tiresome, we can
>> -# just remove it...
>> -while $RUNTIME_arch_run _NO_FILE_4Uhere_ -smp $MAX_SMP \
>> - |& grep -qi 'exceeds max CPUs'; do
>> - MAX_SMP=$((MAX_SMP >> 1))
>> -done
>> +# This probing currently only works for ARM, as x86 bails on another error
>> +# first. Also, this probing isn't necessary for any ARM hosts running kernels
>> +# later than v4.3, i.e. those including ef748917b52 "arm/arm64: KVM: Remove
>> +# 'config KVM_ARM_MAX_VCPUS'". So, at some point when maintaining the while loop
>> +# gets too tiresome, we can just remove it...
>> +#
>> +# We don't need this check for kvmtool, as kvmtool will automatically limit the
>> +# number of VCPUs to what the host supports instead of exiting with an error.
>> +# kvmtool prints a message when that happens, but it's harmless and the chance
>> +# of running a kernel so old that the number of VCPUs is smaller than the number
>> +# of physical CPUs is vanishingly small.
>> +#
>> +# For qemu this check is still needed. For qemu-system-aarch64 version 6.0.0,
>> +# using TCG, the maximum number of VCPUs that mach-virt supports is 8. If a test
>> +# is running on a recent x86 machine, there's a fairly good chance that more
>> +# than 8 logical CPUs are available.
>> +if [ "$TARGET" = "qemu" ]; then
>> + while $RUNTIME_arch_run _NO_FILE_4Uhere_ -smp $MAX_SMP \
>> + |& grep -qi 'exceeds max CPUs'; do
>> + MAX_SMP=$((MAX_SMP >> 1))
>> + done
>> +fi
>> diff --git a/scripts/mkstandalone.sh b/scripts/mkstandalone.sh
>> index cefdec30cb33..16f461c06842 100755
>> --- a/scripts/mkstandalone.sh
>> +++ b/scripts/mkstandalone.sh
>> @@ -95,6 +95,11 @@ function mkstandalone()
>> echo Written $standalone.
>> }
>>
>> +if [ "$TARGET" = "kvmtool" ]; then
>> + echo "Standalone tests not supported with kvmtool"
>> + exit 2
>> +fi
>> +
>> if [ "$ENVIRON_DEFAULT" = "yes" ] && [ "$ERRATATXT" ] && [ ! -f "$ERRATATXT" ]; then
>> echo "$ERRATATXT not found. (ERRATATXT=$ERRATATXT)" >&2
>> exit 2
>> diff --git a/arm/run b/arm/run
>> index a390ca5ae0ba..cc5890e7fec4 100755
>> --- a/arm/run
>> +++ b/arm/run
>> @@ -8,59 +8,81 @@ if [ -z "$STANDALONE" ]; then
>> source config.mak
>> source scripts/arch-run.bash
>> fi
>> -processor="$PROCESSOR"
>>
>> -ACCEL=$(get_qemu_accelerator) ||
>> - exit $?
>> +run_test_qemu()
>> +{
>> + processor="$PROCESSOR"
>>
>> -qemu=$(search_qemu_binary) ||
>> - exit $?
>> + ACCEL=$(get_qemu_accelerator) ||
>> + exit $?
>>
>> -if ! $qemu -machine '?' 2>&1 | grep 'ARM Virtual Machine' > /dev/null; then
>> - echo "$qemu doesn't support mach-virt ('-machine virt'). Exiting."
>> - exit 2
>> -fi
>> + qemu=$(search_qemu_binary) ||
>> + exit $?
>>
>> -M='-machine virt'
>> + if ! $qemu -machine '?' 2>&1 | grep 'ARM Virtual Machine' > /dev/null; then
>> + echo "$qemu doesn't support mach-virt ('-machine virt'). Exiting."
>> + exit 2
>> + fi
>>
>> -if [ "$ACCEL" = "kvm" ]; then
>> - if $qemu $M,\? 2>&1 | grep gic-version > /dev/null; then
>> - M+=',gic-version=host'
>> - fi
>> - if [ "$HOST" = "aarch64" ] || [ "$HOST" = "arm" ]; then
>> - processor="host"
>> - if [ "$ARCH" = "arm" ] && [ "$HOST" = "aarch64" ]; then
>> - processor+=",aarch64=off"
>> - fi
>> - fi
>> -fi
>> + M='-machine virt'
>>
>> -if [ "$ARCH" = "arm" ]; then
>> - M+=",highmem=off"
>> -fi
>> + if [ "$ACCEL" = "kvm" ]; then
>> + if $qemu $M,\? 2>&1 | grep gic-version > /dev/null; then
>> + M+=',gic-version=host'
>> + fi
>> + if [ "$HOST" = "aarch64" ] || [ "$HOST" = "arm" ]; then
>> + processor="host"
>> + if [ "$ARCH" = "arm" ] && [ "$HOST" = "aarch64" ]; then
>> + processor+=",aarch64=off"
>> + fi
>> + fi
>> + fi
>>
>> -if ! $qemu $M -device '?' 2>&1 | grep virtconsole > /dev/null; then
>> - echo "$qemu doesn't support virtio-console for chr-testdev. Exiting."
>> - exit 2
>> -fi
>> + if [ "$ARCH" = "arm" ]; then
>> + M+=",highmem=off"
>> + fi
>>
>> -if $qemu $M -chardev testdev,id=id -initrd . 2>&1 \
>> - | grep backend > /dev/null; then
>> - echo "$qemu doesn't support chr-testdev. Exiting."
>> - exit 2
>> -fi
>> + if ! $qemu $M -device '?' 2>&1 | grep virtconsole > /dev/null; then
>> + echo "$qemu doesn't support virtio-console for chr-testdev. Exiting."
>> + exit 2
>> + fi
>>
>> -chr_testdev='-device virtio-serial-device'
>> -chr_testdev+=' -device virtconsole,chardev=ctd -chardev testdev,id=ctd'
>> + if $qemu $M -chardev testdev,id=id -initrd . 2>&1 \
>> + | grep backend > /dev/null; then
>> + echo "$qemu doesn't support chr-testdev. Exiting."
>> + exit 2
>> + fi
>>
>> -pci_testdev=
>> -if $qemu $M -device '?' 2>&1 | grep pci-testdev > /dev/null; then
>> - pci_testdev="-device pci-testdev"
>> -fi
>> + chr_testdev='-device virtio-serial-device'
>> + chr_testdev+=' -device virtconsole,chardev=ctd -chardev testdev,id=ctd'
>> +
>> + pci_testdev=
>> + if $qemu $M -device '?' 2>&1 | grep pci-testdev > /dev/null; then
>> + pci_testdev="-device pci-testdev"
>> + fi
>> +
>> + M+=",accel=$ACCEL"
>> + command="$qemu -nodefaults $M -cpu $processor $chr_testdev $pci_testdev"
>> + command+=" -display none -serial stdio -kernel"
>> + command="$(migration_cmd) $(timeout_cmd) $command"
>> +
>> + run_qemu $command "$@"
>> +}
>> +
>> +run_test_kvmtool()
>> +{
>> + kvmtool=$(search_kvmtool_binary) ||
>> + exit $?
>>
>> -M+=",accel=$ACCEL"
>> -command="$qemu -nodefaults $M -cpu $processor $chr_testdev $pci_testdev"
>> -command+=" -display none -serial stdio -kernel"
>> -command="$(migration_cmd) $(timeout_cmd) $command"
>> + local command="$(timeout_cmd) $kvmtool run --firmware "
>> + run_test_status $command "$@"
>> +}
>>
>> -run_qemu $command "$@"
>> +case "$TARGET" in
>> + "qemu")
>> + run_test_qemu "$@"
>> + ;;
>> + "kvmtool")
>> + run_test_kvmtool "$@"
>> + ;;
>> +esac
>> diff --git a/run_tests.sh b/run_tests.sh
>> index 65108e73a2c0..b010ee3ab348 100755
>> --- a/run_tests.sh
>> +++ b/run_tests.sh
>> @@ -26,7 +26,9 @@ Usage: $0 [-h] [-v] [-a] [-g group] [-j NUM-TASKS] [-t]
>> -t, --tap13 Output test results in TAP format
>>
>> Set the environment variable QEMU=/path/to/qemu-system-ARCH to
>> -specify the appropriate qemu binary for ARCH-run.
>> +specify the appropriate qemu binary for ARCH-run. For arm/arm64, kvmtool
>> +is also supported and the environment variable KVMTOOL=/path/to/kvmtool
>> +can be used to specify a custom location for the kvmtool binary.
>>
>> EOF
>> }
>> @@ -41,6 +43,13 @@ if [ $? -ne 4 ]; then
>> exit 1
>> fi
>>
>> +if [ "$TARGET" = "kvmtool" ]; then
>> + if [ -n "$ACCEL" ] && [ "$ACCEL" != "kvm" ]; then
>> + echo "kvmtool supports only the kvm accelerator"
>> + exit 1
>> + fi
>> +fi
>> +
>> only_tests=""
>> args=`getopt -u -o ag:htj:v -l all,group:,help,tap13,parallel:,verbose -- $*`
>> [ $? -ne 0 ] && exit 2;
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
