Re: [PATCH v7 5/7] KVM: arm64: Allow userspace to configure a guest's counter-timer offset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 16 Aug 2021 01:12:15 +0100,
Oliver Upton <oupton@xxxxxxxxxx> wrote:
> 
> Presently, KVM provides no facilities for correctly migrating a guest
> that depends on the physical counter-timer. While most guests (barring
> NV, of course) should not depend on the physical counter-timer, an
> operator may wish to provide a consistent view of the physical
> counter-timer across migrations.
> 
> Provide userspace with a new vCPU attribute to modify the guest
> counter-timer offset. Unlike KVM_REG_ARM_TIMER_OFFSET, this attribute is
> hidden from the guest's architectural state. The value offsets *both*
> the virtual and physical counter-timer views for the guest. Only support
> this attribute on ECV systems as ECV is required for hardware offsetting
> of the physical counter-timer.
> 
> Signed-off-by: Oliver Upton <oupton@xxxxxxxxxx>
> Reviewed-by: Andrew Jones <drjones@xxxxxxxxxx>
> ---
>  Documentation/arm64/booting.rst         |  7 ++
>  Documentation/virt/kvm/devices/vcpu.rst | 28 ++++++++
>  arch/arm64/include/asm/kvm_asm.h        |  2 +
>  arch/arm64/include/asm/sysreg.h         |  2 +
>  arch/arm64/include/uapi/asm/kvm.h       |  1 +
>  arch/arm64/kvm/arch_timer.c             | 96 ++++++++++++++++++++++++-
>  arch/arm64/kvm/hyp/nvhe/hyp-main.c      |  6 ++
>  arch/arm64/kvm/hyp/nvhe/timer-sr.c      |  9 +++
>  arch/arm64/kvm/hyp/vhe/timer-sr.c       |  5 ++
>  include/clocksource/arm_arch_timer.h    |  1 +
>  10 files changed, 155 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/arm64/booting.rst b/Documentation/arm64/booting.rst
> index a9192e7a231b..bfdbc9df7b55 100644
> --- a/Documentation/arm64/booting.rst
> +++ b/Documentation/arm64/booting.rst
> @@ -311,6 +311,13 @@ Before jumping into the kernel, the following conditions must be met:
>      - ZCR_EL2.LEN must be initialised to the same value for all CPUs the
>        kernel will execute on.
>  
> +  For CPUs with the Enhanced Counter Virtualization (FEAT_ECV) extension
> +  present with ID_AA64MMFR0_EL1.ECV >= 0x2:
> +
> +  - if EL3 is present and the kernel is entered at EL2:
> +
> +    - SCR_EL3.ECVEn (bit 28) must be initialized to 0b1.
> +
>  The requirements described above for CPU mode, caches, MMUs, architected
>  timers, coherency and system registers apply to all CPUs.  All CPUs must
>  enter the kernel in the same exception level.  Where the values documented
> diff --git a/Documentation/virt/kvm/devices/vcpu.rst b/Documentation/virt/kvm/devices/vcpu.rst
> index 2acec3b9ef65..f240ecc174ef 100644
> --- a/Documentation/virt/kvm/devices/vcpu.rst
> +++ b/Documentation/virt/kvm/devices/vcpu.rst
> @@ -139,6 +139,34 @@ configured values on other VCPUs.  Userspace should configure the interrupt
>  numbers on at least one VCPU after creating all VCPUs and before running any
>  VCPUs.
>  
> +2.2. ATTRIBUTE: KVM_ARM_VCPU_TIMER_PHYS_OFFSET
> +-----------------------------------------
> +
> +:Parameters: in kvm_device_attr.addr the address for the timer offset is a
> +             pointer to a __u64
> +
> +Returns:
> +
> +	 ======= ==================================
> +	 -EFAULT Error reading/writing the provided
> +		 parameter address
> +	 -ENXIO  Timer offsetting not implemented
> +	 ======= ==================================
> +
> +Specifies the guest's counter-timer offset from the host's virtual counter.
> +The guest's physical counter value is then derived by the following
> +equation:
> +
> +  guest_cntpct = host_cntvct - KVM_ARM_VCPU_TIMER_PHYS_OFFSET
> +
> +The guest's virtual counter value is derived by the following equation:
> +
> +  guest_cntvct = host_cntvct - KVM_REG_ARM_TIMER_OFFSET
> +			- KVM_ARM_VCPU_TIMER_PHYS_OFFSET
> +
> +KVM does not allow the use of varying offset values for different vCPUs;
> +the last written offset value will be broadcasted to all vCPUs in a VM.
> +
>  3. GROUP: KVM_ARM_VCPU_PVTIME_CTRL
>  ==================================
>  
> diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h
> index aed2aa61766a..052a6f987095 100644
> --- a/arch/arm64/include/asm/kvm_asm.h
> +++ b/arch/arm64/include/asm/kvm_asm.h
> @@ -64,6 +64,7 @@
>  #define __KVM_HOST_SMCCC_FUNC___pkvm_cpu_set_vector		18
>  #define __KVM_HOST_SMCCC_FUNC___pkvm_prot_finalize		19
>  #define __KVM_HOST_SMCCC_FUNC___kvm_adjust_pc			20
> +#define __KVM_HOST_SMCCC_FUNC___kvm_timer_set_cntpoff		21
>  
>  #ifndef __ASSEMBLY__
>  
> @@ -199,6 +200,7 @@ extern void __kvm_tlb_flush_vmid_ipa(struct kvm_s2_mmu *mmu, phys_addr_t ipa,
>  extern void __kvm_tlb_flush_vmid(struct kvm_s2_mmu *mmu);
>  
>  extern void __kvm_timer_set_cntvoff(u64 cntvoff);
> +extern void __kvm_timer_set_cntpoff(u64 cntpoff);
>  
>  extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
>  
> diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
> index c7ddf9a71134..e02b7cd574e6 100644
> --- a/arch/arm64/include/asm/sysreg.h
> +++ b/arch/arm64/include/asm/sysreg.h
> @@ -586,6 +586,8 @@
>  #define SYS_ICH_LR14_EL2		__SYS__LR8_EL2(6)
>  #define SYS_ICH_LR15_EL2		__SYS__LR8_EL2(7)
>  
> +#define SYS_CNTPOFF_EL2			sys_reg(3, 4, 14, 0, 6)
> +
>  /* VHE encodings for architectural EL0/1 system registers */
>  #define SYS_SCTLR_EL12			sys_reg(3, 5, 1, 0, 0)
>  #define SYS_CPACR_EL12			sys_reg(3, 5, 1, 0, 2)
> diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
> index 949a31bc10f0..70e2893c1749 100644
> --- a/arch/arm64/include/uapi/asm/kvm.h
> +++ b/arch/arm64/include/uapi/asm/kvm.h
> @@ -366,6 +366,7 @@ struct kvm_arm_copy_mte_tags {
>  #define KVM_ARM_VCPU_TIMER_CTRL		1
>  #define   KVM_ARM_VCPU_TIMER_IRQ_VTIMER		0
>  #define   KVM_ARM_VCPU_TIMER_IRQ_PTIMER		1
> +#define   KVM_ARM_VCPU_TIMER_PHYS_OFFSET	2
>  #define KVM_ARM_VCPU_PVTIME_CTRL	2
>  #define   KVM_ARM_VCPU_PVTIME_IPA	0
>  
> diff --git a/arch/arm64/kvm/arch_timer.c b/arch/arm64/kvm/arch_timer.c
> index 9d9bac3ec40e..46380c389683 100644
> --- a/arch/arm64/kvm/arch_timer.c
> +++ b/arch/arm64/kvm/arch_timer.c
> @@ -86,8 +86,11 @@ static u64 timer_get_offset(struct arch_timer_context *ctxt)
>  {
>  	switch(arch_timer_ctx_index(ctxt)) {
>  	case TIMER_VTIMER:
> +	case TIMER_PTIMER:
>  		return ctxt->host_offset;
>  	default:
> +		WARN_ONCE(1, "unrecognized timer %ld\n",
> +			  arch_timer_ctx_index(ctxt));
>  		return 0;
>  	}
>  }
> @@ -140,6 +143,7 @@ static void timer_set_offset(struct arch_timer_context *ctxt, u64 offset)
>  {
>  	switch(arch_timer_ctx_index(ctxt)) {
>  	case TIMER_VTIMER:
> +	case TIMER_PTIMER:
>  		ctxt->host_offset = offset;
>  		break;
>  	default:
> @@ -568,6 +572,11 @@ static void set_cntvoff(u64 cntvoff)
>  	kvm_call_hyp(__kvm_timer_set_cntvoff, cntvoff);
>  }
>  
> +static void set_cntpoff(u64 cntpoff)
> +{
> +	kvm_call_hyp(__kvm_timer_set_cntpoff, cntpoff);
> +}
> +
>  static inline void set_timer_irq_phys_active(struct arch_timer_context *ctx, bool active)
>  {
>  	int r;
> @@ -643,6 +652,8 @@ void kvm_timer_vcpu_load(struct kvm_vcpu *vcpu)
>  	}
>  
>  	set_cntvoff(timer_get_offset(map.direct_vtimer));
> +	if (cpus_have_final_cap(ARM64_HAS_ECV2))
> +		set_cntpoff(timer_get_offset(vcpu_ptimer(vcpu)));

You probably want to change vcpu_ptimer(vcpu) to map.direct_ptimer.
This will work for NV, and won't impact nVHE (see below for the
details).

>  
>  	kvm_timer_unblocking(vcpu);
>  
> @@ -810,6 +821,22 @@ static void update_vtimer_cntvoff(struct kvm_vcpu *vcpu, u64 cntvoff)
>  	mutex_unlock(&kvm->lock);
>  }
>  
> +static void update_ptimer_cntpoff(struct kvm_vcpu *vcpu, u64 cntpoff)
> +{
> +	struct kvm *kvm = vcpu->kvm;
> +	u64 cntvoff;
> +
> +	mutex_lock(&kvm->lock);
> +
> +	/* adjustments to the physical offset also affect vtimer */
> +	cntvoff = timer_get_offset(vcpu_vtimer(vcpu));
> +	cntvoff += cntpoff - timer_get_offset(vcpu_ptimer(vcpu));
> +
> +	update_timer_offset(vcpu, TIMER_PTIMER, cntpoff, false);
> +	update_timer_offset(vcpu, TIMER_VTIMER, cntvoff, false);
> +	mutex_unlock(&kvm->lock);
> +}
> +
>  void kvm_timer_vcpu_init(struct kvm_vcpu *vcpu)
>  {
>  	struct arch_timer_cpu *timer = vcpu_timer(vcpu);
> @@ -1346,6 +1373,9 @@ void kvm_timer_init_vhe(void)
>  	val = read_sysreg(cnthctl_el2);
>  	val |= (CNTHCTL_EL1PCEN << cnthctl_shift);
>  	val |= (CNTHCTL_EL1PCTEN << cnthctl_shift);
> +
> +	if (cpus_have_final_cap(ARM64_HAS_ECV2))
> +		val |= CNTHCTL_ECV;
>  	write_sysreg(val, cnthctl_el2);
>  }
>  
> @@ -1360,7 +1390,8 @@ static void set_timer_irqs(struct kvm *kvm, int vtimer_irq, int ptimer_irq)
>  	}
>  }
>  
> -int kvm_arm_timer_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
> +static int kvm_arm_timer_set_attr_irq(struct kvm_vcpu *vcpu,
> +				      struct kvm_device_attr *attr)
>  {
>  	int __user *uaddr = (int __user *)(long)attr->addr;
>  	struct arch_timer_context *vtimer = vcpu_vtimer(vcpu);
> @@ -1393,7 +1424,37 @@ int kvm_arm_timer_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
>  	return 0;
>  }
>  
> -int kvm_arm_timer_get_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
> +static int kvm_arm_timer_set_attr_offset(struct kvm_vcpu *vcpu,
> +					 struct kvm_device_attr *attr)
> +{
> +	u64 __user *uaddr = (u64 __user *)(long)attr->addr;
> +	u64 offset;
> +
> +	if (!cpus_have_final_cap(ARM64_HAS_ECV2))
> +		return -ENXIO;
> +
> +	if (get_user(offset, uaddr))
> +		return -EFAULT;
> +
> +	update_ptimer_cntpoff(vcpu, offset);
> +	return 0;
> +}
> +
> +int kvm_arm_timer_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
> +{
> +	switch (attr->attr) {
> +	case KVM_ARM_VCPU_TIMER_IRQ_VTIMER:
> +	case KVM_ARM_VCPU_TIMER_IRQ_PTIMER:
> +		return kvm_arm_timer_set_attr_irq(vcpu, attr);
> +	case KVM_ARM_VCPU_TIMER_PHYS_OFFSET:
> +		return kvm_arm_timer_set_attr_offset(vcpu, attr);
> +	default:
> +		return -ENXIO;
> +	}
> +}
> +
> +static int kvm_arm_timer_get_attr_irq(struct kvm_vcpu *vcpu,
> +				      struct kvm_device_attr *attr)
>  {
>  	int __user *uaddr = (int __user *)(long)attr->addr;
>  	struct arch_timer_context *timer;
> @@ -1414,12 +1475,43 @@ int kvm_arm_timer_get_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
>  	return put_user(irq, uaddr);
>  }
>  
> +static int kvm_arm_timer_get_attr_offset(struct kvm_vcpu *vcpu,
> +					 struct kvm_device_attr *attr)
> +{
> +	u64 __user *uaddr = (u64 __user *)(long)attr->addr;
> +	u64 offset;
> +
> +	if (!cpus_have_final_cap(ARM64_HAS_ECV2))
> +		return -ENXIO;
> +
> +	offset = timer_get_offset(vcpu_ptimer(vcpu));
> +	return put_user(offset, uaddr);
> +}
> +
> +int kvm_arm_timer_get_attr(struct kvm_vcpu *vcpu,
> +			   struct kvm_device_attr *attr)
> +{
> +	switch (attr->attr) {
> +	case KVM_ARM_VCPU_TIMER_IRQ_VTIMER:
> +	case KVM_ARM_VCPU_TIMER_IRQ_PTIMER:
> +		return kvm_arm_timer_get_attr_irq(vcpu, attr);
> +	case KVM_ARM_VCPU_TIMER_PHYS_OFFSET:
> +		return kvm_arm_timer_get_attr_offset(vcpu, attr);
> +	default:
> +		return -ENXIO;
> +	}
> +}
> +
>  int kvm_arm_timer_has_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
>  {
>  	switch (attr->attr) {
>  	case KVM_ARM_VCPU_TIMER_IRQ_VTIMER:
>  	case KVM_ARM_VCPU_TIMER_IRQ_PTIMER:
>  		return 0;
> +	case KVM_ARM_VCPU_TIMER_PHYS_OFFSET:
> +		if (cpus_have_final_cap(ARM64_HAS_ECV2))
> +			return 0;
> +		break;
>  	}
>  
>  	return -ENXIO;
> diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-main.c b/arch/arm64/kvm/hyp/nvhe/hyp-main.c
> index 2da6aa8da868..f1b8da4737dc 100644
> --- a/arch/arm64/kvm/hyp/nvhe/hyp-main.c
> +++ b/arch/arm64/kvm/hyp/nvhe/hyp-main.c
> @@ -68,6 +68,11 @@ static void handle___kvm_timer_set_cntvoff(struct kvm_cpu_context *host_ctxt)
>  	__kvm_timer_set_cntvoff(cpu_reg(host_ctxt, 1));
>  }
>  
> +static void handle___kvm_timer_set_cntpoff(struct kvm_cpu_context *host_ctxt)
> +{
> +	__kvm_timer_set_cntpoff(cpu_reg(host_ctxt, 1));
> +}
> +
>  static void handle___kvm_enable_ssbs(struct kvm_cpu_context *host_ctxt)
>  {
>  	u64 tmp;
> @@ -185,6 +190,7 @@ static const hcall_t host_hcall[] = {
>  	HANDLE_FUNC(__pkvm_host_share_hyp),
>  	HANDLE_FUNC(__pkvm_create_private_mapping),
>  	HANDLE_FUNC(__pkvm_prot_finalize),
> +	HANDLE_FUNC(__kvm_timer_set_cntpoff),
>  };
>  
>  static void handle_host_hcall(struct kvm_cpu_context *host_ctxt)
> diff --git a/arch/arm64/kvm/hyp/nvhe/timer-sr.c b/arch/arm64/kvm/hyp/nvhe/timer-sr.c
> index 9072e71693ba..e98a949f5227 100644
> --- a/arch/arm64/kvm/hyp/nvhe/timer-sr.c
> +++ b/arch/arm64/kvm/hyp/nvhe/timer-sr.c
> @@ -15,6 +15,11 @@ void __kvm_timer_set_cntvoff(u64 cntvoff)
>  	write_sysreg(cntvoff, cntvoff_el2);
>  }
>  
> +void __kvm_timer_set_cntpoff(u64 cntpoff)
> +{
> +	write_sysreg_s(cntpoff, SYS_CNTPOFF_EL2);
> +}
> +
>  /*
>   * Should only be called on non-VHE systems.
>   * VHE systems use EL2 timers and configure EL1 timers in kvm_timer_init_vhe().
> @@ -26,6 +31,8 @@ void __timer_disable_traps(struct kvm_vcpu *vcpu)
>  	/* Allow physical timer/counter access for the host */
>  	val = read_sysreg(cnthctl_el2);
>  	val |= CNTHCTL_EL1PCTEN | CNTHCTL_EL1PCEN;
> +	if (cpus_have_final_cap(ARM64_HAS_ECV2))
> +		val &= ~CNTHCTL_ECV;
>  	write_sysreg(val, cnthctl_el2);
>  }
>  
> @@ -42,6 +49,8 @@ void __timer_enable_traps(struct kvm_vcpu *vcpu)
>  	 * Physical counter access is allowed
>  	 */
>  	val = read_sysreg(cnthctl_el2);
> +	if (cpus_have_final_cap(ARM64_HAS_ECV2))
> +		val |= CNTHCTL_ECV;

There is something here that has been nagging me for some time, and I
just had an epiphany: ECV2 is fundamentally incompatible with the way
we use the physical timer in nVHE.

The main reason is that we never use the EL2 timer like VHE does, but
instead stick with the EL1 timer. Which is fine, since we only provide
access to the *counter* in a guest.

However, with ECV2, we allow the counter to be offset to an arbitrary
value. On the face of it, it should be OK, as only the guest can
access the counter while the offset is active. However, there is a
small nugget in the spec that says:

<quote>
The CNTPOFF_EL2 offset applies to:
* Direct reads of the physical counter from EL0 or EL1.
* Indirect reads of the physical counter by the EL1 physical timer.
</quote>

and this last point is absolutely critical. The timer itself can
observe the offset, which means that depending on how the comparator
is implemented, the offset could influence the firing of the timer
that the *host* uses. And that's clearly not acceptable.

I can see two ways to work around this:

- we stick to the tried and trusted SW emulation for the counter on
nVHE,

- we use the EL2 timer as an offload for the host EL1 timer and switch
it on entry/exit. This requires some additional setup code (the
interrupt needs to be enabled), and the overhead of the offload is
currently unknown.

My advise would be to stick to the emulation until someone shouts,
which is pretty unlikely. We can gate the detection of ECV2 on VHE for
the time being, and drop the setup code.

Thanks,

	M.

-- 
Without deviation from the norm, progress is not possible.
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm



[Index of Archives]     [Linux KVM]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux