On Wed, 04 Aug 2021 09:58:15 +0100,
Oliver Upton <oupton@xxxxxxxxxx> wrote:
>
> Presently, KVM provides no facilities for correctly migrating a guest
> that depends on the physical counter-timer. Whie most guests (barring
nit: While
> NV, of course) should not depend on the physical counter-timer, an
> operator may wish to provide a consistent view of the physical
> counter-timer across migrations.
>
> Provide userspace with a new vCPU attribute to modify the guest
> counter-timer offset. Unlike KVM_REG_ARM_TIMER_OFFSET, this attribute is
> hidden from the guest's architectural state. The value offsets *both*
> the virtual and physical counter-timer views for the guest. Only support
> this attribute on ECV systems as ECV is required for hardware offsetting
> of the physical counter-timer.
>
> Signed-off-by: Oliver Upton <oupton@xxxxxxxxxx>
> ---
> Documentation/virt/kvm/devices/vcpu.rst | 28 ++++++
> arch/arm64/include/asm/kvm_asm.h | 2 +
> arch/arm64/include/asm/sysreg.h | 2 +
> arch/arm64/include/uapi/asm/kvm.h | 1 +
> arch/arm64/kvm/arch_timer.c | 122 +++++++++++++++++++++++-
> arch/arm64/kvm/hyp/nvhe/hyp-main.c | 6 ++
> arch/arm64/kvm/hyp/nvhe/timer-sr.c | 5 +
> arch/arm64/kvm/hyp/vhe/timer-sr.c | 5 +
> include/clocksource/arm_arch_timer.h | 1 +
> 9 files changed, 169 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/virt/kvm/devices/vcpu.rst b/Documentation/virt/kvm/devices/vcpu.rst
> index 3b399d727c11..3ba35b9d9d03 100644
> --- a/Documentation/virt/kvm/devices/vcpu.rst
> +++ b/Documentation/virt/kvm/devices/vcpu.rst
> @@ -139,6 +139,34 @@ configured values on other VCPUs. Userspace should configure the interrupt
> numbers on at least one VCPU after creating all VCPUs and before running any
> VCPUs.
>
> +2.2. ATTRIBUTE: KVM_ARM_VCPU_TIMER_OFFSET
> +-----------------------------------------
> +
> +:Parameters: in kvm_device_attr.addr the address for the timer offset is a
> + pointer to a __u64
> +
> +Returns:
> +
> + ======= ==================================
> + -EFAULT Error reading/writing the provided
> + parameter address
> + -ENXIO Timer offsetting not implemented
> + ======= ==================================
> +
> +Specifies the guest's counter-timer offset from the host's virtual counter.
> +The guest's physical counter value is then derived by the following
> +equation:
> +
> + guest_cntpct = host_cntvct - KVM_ARM_VCPU_TIMER_OFFSET
> +
> +The guest's virtual counter value is derived by the following equation:
> +
> + guest_cntvct = host_cntvct - KVM_REG_ARM_TIMER_OFFSET
> + - KVM_ARM_VCPU_TIMER_OFFSET
> +
> +KVM does not allow the use of varying offset values for different vCPUs;
> +the last written offset value will be broadcasted to all vCPUs in a VM.
> +
> 3. GROUP: KVM_ARM_VCPU_PVTIME_CTRL
> ==================================
>
> diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h
> index 9f0bf2109be7..ab1c8fdb0177 100644
> --- a/arch/arm64/include/asm/kvm_asm.h
> +++ b/arch/arm64/include/asm/kvm_asm.h
> @@ -65,6 +65,7 @@
> #define __KVM_HOST_SMCCC_FUNC___pkvm_prot_finalize 19
> #define __KVM_HOST_SMCCC_FUNC___pkvm_mark_hyp 20
> #define __KVM_HOST_SMCCC_FUNC___kvm_adjust_pc 21
> +#define __KVM_HOST_SMCCC_FUNC___kvm_timer_set_cntpoff 22
>
> #ifndef __ASSEMBLY__
>
> @@ -200,6 +201,7 @@ extern void __kvm_tlb_flush_vmid_ipa(struct kvm_s2_mmu *mmu, phys_addr_t ipa,
> extern void __kvm_tlb_flush_vmid(struct kvm_s2_mmu *mmu);
>
> extern void __kvm_timer_set_cntvoff(u64 cntvoff);
> +extern void __kvm_timer_set_cntpoff(u64 cntpoff);
>
> extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
>
> diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
> index 4dfc44066dfb..c34672aa65b9 100644
> --- a/arch/arm64/include/asm/sysreg.h
> +++ b/arch/arm64/include/asm/sysreg.h
> @@ -586,6 +586,8 @@
> #define SYS_ICH_LR14_EL2 __SYS__LR8_EL2(6)
> #define SYS_ICH_LR15_EL2 __SYS__LR8_EL2(7)
>
> +#define SYS_CNTPOFF_EL2 sys_reg(3, 4, 14, 0, 6)
> +
> /* VHE encodings for architectural EL0/1 system registers */
> #define SYS_SCTLR_EL12 sys_reg(3, 5, 1, 0, 0)
> #define SYS_CPACR_EL12 sys_reg(3, 5, 1, 0, 2)
> diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
> index 949a31bc10f0..15150f8224a1 100644
> --- a/arch/arm64/include/uapi/asm/kvm.h
> +++ b/arch/arm64/include/uapi/asm/kvm.h
> @@ -366,6 +366,7 @@ struct kvm_arm_copy_mte_tags {
> #define KVM_ARM_VCPU_TIMER_CTRL 1
> #define KVM_ARM_VCPU_TIMER_IRQ_VTIMER 0
> #define KVM_ARM_VCPU_TIMER_IRQ_PTIMER 1
> +#define KVM_ARM_VCPU_TIMER_OFFSET 2
> #define KVM_ARM_VCPU_PVTIME_CTRL 2
> #define KVM_ARM_VCPU_PVTIME_IPA 0
>
> diff --git a/arch/arm64/kvm/arch_timer.c b/arch/arm64/kvm/arch_timer.c
> index a8815b09da3e..f15058612994 100644
> --- a/arch/arm64/kvm/arch_timer.c
> +++ b/arch/arm64/kvm/arch_timer.c
> @@ -85,11 +85,15 @@ u64 timer_get_cval(struct arch_timer_context *ctxt)
> static u64 timer_get_offset(struct arch_timer_context *ctxt)
> {
> struct kvm_vcpu *vcpu = ctxt->vcpu;
> + struct arch_timer_cpu *timer = vcpu_timer(vcpu);
Unused variable?
>
> switch(arch_timer_ctx_index(ctxt)) {
> case TIMER_VTIMER:
> + case TIMER_PTIMER:
> return ctxt->host_offset;
> default:
> + WARN_ONCE(1, "unrecognized timer %ld\n",
> + arch_timer_ctx_index(ctxt));
> return 0;
> }
> }
> @@ -144,6 +148,7 @@ static void timer_set_offset(struct arch_timer_context *ctxt, u64 offset)
>
> switch(arch_timer_ctx_index(ctxt)) {
> case TIMER_VTIMER:
> + case TIMER_PTIMER:
> ctxt->host_offset = offset;
> break;
> default:
> @@ -572,6 +577,11 @@ static void set_cntvoff(u64 cntvoff)
> kvm_call_hyp(__kvm_timer_set_cntvoff, cntvoff);
> }
>
> +static void set_cntpoff(u64 cntpoff)
> +{
> + kvm_call_hyp(__kvm_timer_set_cntpoff, cntpoff);
> +}
> +
> static inline void set_timer_irq_phys_active(struct arch_timer_context *ctx, bool active)
> {
> int r;
> @@ -647,6 +657,8 @@ void kvm_timer_vcpu_load(struct kvm_vcpu *vcpu)
> }
>
> set_cntvoff(timer_get_offset(map.direct_vtimer));
> + if (cpus_have_const_cap(ARM64_ECV))
This really should be a final cap instead (same for all the other use
cases).
> + set_cntpoff(timer_get_offset(vcpu_ptimer(vcpu)));
However, tripping to EL2 for each offset on nVHE may prove to be an
unnecessary overhead. Not a problem for now anyway.
>
> kvm_timer_unblocking(vcpu);
>
> @@ -814,6 +826,22 @@ static void update_vtimer_cntvoff(struct kvm_vcpu *vcpu, u64 cntvoff)
> mutex_unlock(&kvm->lock);
> }
>
> +static void update_ptimer_cntpoff(struct kvm_vcpu *vcpu, u64 cntpoff)
> +{
> + struct kvm *kvm = vcpu->kvm;
> + u64 cntvoff;
> +
> + mutex_lock(&kvm->lock);
> +
> + /* adjustments to the physical offset also affect vtimer */
> + cntvoff = timer_get_offset(vcpu_vtimer(vcpu));
> + cntvoff += cntpoff - timer_get_offset(vcpu_ptimer(vcpu));
> +
> + update_timer_offset(vcpu, TIMER_PTIMER, cntpoff, false);
> + update_timer_offset(vcpu, TIMER_VTIMER, cntvoff, false);
> + mutex_unlock(&kvm->lock);
> +}
> +
> void kvm_timer_vcpu_init(struct kvm_vcpu *vcpu)
> {
> struct arch_timer_cpu *timer = vcpu_timer(vcpu);
> @@ -932,6 +960,29 @@ u64 kvm_arm_timer_get_reg(struct kvm_vcpu *vcpu, u64 regid)
> return (u64)-1;
> }
>
> +/**
> + * kvm_arm_timer_read_offset - returns the guest value of CNTVOFF_EL2.
> + * @vcpu: the vcpu pointer
> + *
> + * Computes the guest value of CNTVOFF_EL2 by subtracting the physical
> + * counter offset. Note that KVM defines CNTVOFF_EL2 as the offset from the
> + * guest's physical counter-timer, not the host's.
> + *
> + * Returns: the guest value for CNTVOFF_EL2
> + */
> +static u64 kvm_arm_timer_read_offset(struct kvm_vcpu *vcpu)
> +{
> + struct kvm *kvm = vcpu->kvm;
> + u64 offset;
> +
> + mutex_lock(&kvm->lock);
> + offset = timer_get_offset(vcpu_vtimer(vcpu)) -
> + timer_get_offset(vcpu_ptimer(vcpu));
nit: please keep this on a single line.
> + mutex_unlock(&kvm->lock);
> +
> + return offset;
> +}
> +
> static u64 kvm_arm_timer_read(struct kvm_vcpu *vcpu,
> struct arch_timer_context *timer,
> enum kvm_arch_timer_regs treg)
> @@ -957,7 +1008,7 @@ static u64 kvm_arm_timer_read(struct kvm_vcpu *vcpu,
> break;
>
> case TIMER_REG_OFFSET:
> - val = timer_get_offset(timer);
> + val = kvm_arm_timer_read_offset(vcpu);
> break;
>
> default:
> @@ -1350,6 +1401,9 @@ void kvm_timer_init_vhe(void)
> val = read_sysreg(cnthctl_el2);
> val |= (CNTHCTL_EL1PCEN << cnthctl_shift);
> val |= (CNTHCTL_EL1PCTEN << cnthctl_shift);
> +
> + if (cpus_have_const_cap(ARM64_ECV))
> + val |= CNTHCTL_ECV;
I cannot immediately see where you are doing the equivalent enablement
of ECV on the nVHE path. Obviously, it has to be done eagerly from
EL2, together with the rest of the EL1 timer setup. Something like:
diff --git a/arch/arm64/kvm/hyp/nvhe/timer-sr.c b/arch/arm64/kvm/hyp/nvhe/timer-sr.c
index 9072e71693ba..999931fe55d2 100644
--- a/arch/arm64/kvm/hyp/nvhe/timer-sr.c
+++ b/arch/arm64/kvm/hyp/nvhe/timer-sr.c
@@ -26,6 +26,8 @@ void __timer_disable_traps(struct kvm_vcpu *vcpu)
/* Allow physical timer/counter access for the host */
val = read_sysreg(cnthctl_el2);
val |= CNTHCTL_EL1PCTEN | CNTHCTL_EL1PCEN;
+ if (cpus_have_final_cap(ARM64_ECV))
+ val |= CNTHCTL_ECV;
write_sysreg(val, cnthctl_el2);
}
@@ -42,6 +44,8 @@ void __timer_enable_traps(struct kvm_vcpu *vcpu)
* Physical counter access is allowed
*/
val = read_sysreg(cnthctl_el2);
+ if (cpus_have_final_cap(ARM64_ECV))
+ val &= ~CNTHCTL_ECV;
val &= ~CNTHCTL_EL1PCEN;
val |= CNTHCTL_EL1PCTEN;
write_sysreg(val, cnthctl_el2);
This will ensure that only the guest sees the physical offset.
> write_sysreg(val, cnthctl_el2);
> }
>
> @@ -1364,7 +1418,8 @@ static void set_timer_irqs(struct kvm *kvm, int vtimer_irq, int ptimer_irq)
> }
> }
>
> -int kvm_arm_timer_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
> +static int kvm_arm_timer_set_attr_irq(struct kvm_vcpu *vcpu,
> + struct kvm_device_attr *attr)
> {
> int __user *uaddr = (int __user *)(long)attr->addr;
> struct arch_timer_context *vtimer = vcpu_vtimer(vcpu);
> @@ -1397,7 +1452,37 @@ int kvm_arm_timer_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
> return 0;
> }
>
> -int kvm_arm_timer_get_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
> +static int kvm_arm_timer_set_attr_offset(struct kvm_vcpu *vcpu,
> + struct kvm_device_attr *attr)
> +{
> + u64 __user *uaddr = (u64 __user *)(long)attr->addr;
> + u64 offset;
> +
> + if (!cpus_have_const_cap(ARM64_ECV))
> + return -ENXIO;
> +
> + if (get_user(offset, uaddr))
> + return -EFAULT;
> +
> + update_ptimer_cntpoff(vcpu, offset);
> + return 0;
> +}
> +
> +int kvm_arm_timer_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
> +{
> + switch (attr->attr) {
> + case KVM_ARM_VCPU_TIMER_IRQ_VTIMER:
> + case KVM_ARM_VCPU_TIMER_IRQ_PTIMER:
> + return kvm_arm_timer_set_attr_irq(vcpu, attr);
> + case KVM_ARM_VCPU_TIMER_OFFSET:
> + return kvm_arm_timer_set_attr_offset(vcpu, attr);
> + default:
> + return -ENXIO;
> + }
> +}
> +
> +static int kvm_arm_timer_get_attr_irq(struct kvm_vcpu *vcpu,
> + struct kvm_device_attr *attr)
> {
> int __user *uaddr = (int __user *)(long)attr->addr;
> struct arch_timer_context *timer;
> @@ -1418,12 +1503,43 @@ int kvm_arm_timer_get_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
> return put_user(irq, uaddr);
> }
>
> +static int kvm_arm_timer_get_attr_offset(struct kvm_vcpu *vcpu,
> + struct kvm_device_attr *attr)
> +{
> + u64 __user *uaddr = (u64 __user *)(long)attr->addr;
> + u64 offset;
> +
> + if (!cpus_have_const_cap(ARM64_ECV))
> + return -ENXIO;
> +
> + offset = timer_get_offset(vcpu_ptimer(vcpu));
> + return put_user(offset, uaddr);
> +}
> +
> +int kvm_arm_timer_get_attr(struct kvm_vcpu *vcpu,
> + struct kvm_device_attr *attr)
> +{
> + switch (attr->attr) {
> + case KVM_ARM_VCPU_TIMER_IRQ_VTIMER:
> + case KVM_ARM_VCPU_TIMER_IRQ_PTIMER:
> + return kvm_arm_timer_get_attr_irq(vcpu, attr);
> + case KVM_ARM_VCPU_TIMER_OFFSET:
> + return kvm_arm_timer_get_attr_offset(vcpu, attr);
> + default:
> + return -ENXIO;
> + }
> +}
> +
> int kvm_arm_timer_has_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
> {
> switch (attr->attr) {
> case KVM_ARM_VCPU_TIMER_IRQ_VTIMER:
> case KVM_ARM_VCPU_TIMER_IRQ_PTIMER:
> return 0;
> + case KVM_ARM_VCPU_TIMER_OFFSET:
> + if (cpus_have_const_cap(ARM64_ECV))
> + return 0;
> + break;
> }
>
> return -ENXIO;
> diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-main.c b/arch/arm64/kvm/hyp/nvhe/hyp-main.c
> index 1632f001f4ed..cfa923df3af6 100644
> --- a/arch/arm64/kvm/hyp/nvhe/hyp-main.c
> +++ b/arch/arm64/kvm/hyp/nvhe/hyp-main.c
> @@ -68,6 +68,11 @@ static void handle___kvm_timer_set_cntvoff(struct kvm_cpu_context *host_ctxt)
> __kvm_timer_set_cntvoff(cpu_reg(host_ctxt, 1));
> }
>
> +static void handle___kvm_timer_set_cntpoff(struct kvm_cpu_context *host_ctxt)
> +{
> + __kvm_timer_set_cntpoff(cpu_reg(host_ctxt, 1));
> +}
> +
> static void handle___kvm_enable_ssbs(struct kvm_cpu_context *host_ctxt)
> {
> u64 tmp;
> @@ -197,6 +202,7 @@ static const hcall_t host_hcall[] = {
> HANDLE_FUNC(__pkvm_create_private_mapping),
> HANDLE_FUNC(__pkvm_prot_finalize),
> HANDLE_FUNC(__pkvm_mark_hyp),
> + HANDLE_FUNC(__kvm_timer_set_cntpoff),
> };
>
> static void handle_host_hcall(struct kvm_cpu_context *host_ctxt)
> diff --git a/arch/arm64/kvm/hyp/nvhe/timer-sr.c b/arch/arm64/kvm/hyp/nvhe/timer-sr.c
> index 9072e71693ba..5b8b4cd02506 100644
> --- a/arch/arm64/kvm/hyp/nvhe/timer-sr.c
> +++ b/arch/arm64/kvm/hyp/nvhe/timer-sr.c
> @@ -15,6 +15,11 @@ void __kvm_timer_set_cntvoff(u64 cntvoff)
> write_sysreg(cntvoff, cntvoff_el2);
> }
>
> +void __kvm_timer_set_cntpoff(u64 cntpoff)
> +{
> + write_sysreg_s(cntpoff, SYS_CNTPOFF_EL2);
> +}
> +
> /*
> * Should only be called on non-VHE systems.
> * VHE systems use EL2 timers and configure EL1 timers in kvm_timer_init_vhe().
> diff --git a/arch/arm64/kvm/hyp/vhe/timer-sr.c b/arch/arm64/kvm/hyp/vhe/timer-sr.c
> index 4cda674a8be6..231e16a071a5 100644
> --- a/arch/arm64/kvm/hyp/vhe/timer-sr.c
> +++ b/arch/arm64/kvm/hyp/vhe/timer-sr.c
> @@ -10,3 +10,8 @@ void __kvm_timer_set_cntvoff(u64 cntvoff)
> {
> write_sysreg(cntvoff, cntvoff_el2);
> }
> +
> +void __kvm_timer_set_cntpoff(u64 cntpoff)
> +{
> + write_sysreg_s(cntpoff, SYS_CNTPOFF_EL2);
> +}
> diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
> index 73c7139c866f..7252ffa3d675 100644
> --- a/include/clocksource/arm_arch_timer.h
> +++ b/include/clocksource/arm_arch_timer.h
> @@ -21,6 +21,7 @@
> #define CNTHCTL_EVNTEN (1 << 2)
> #define CNTHCTL_EVNTDIR (1 << 3)
> #define CNTHCTL_EVNTI (0xF << 4)
> +#define CNTHCTL_ECV (1 << 12)
>
> enum arch_timer_reg {
> ARCH_TIMER_REG_CTRL,
You also want to document that SCR_EL3.ECVEn has to be set to 1 for
this to work (see Documentation/arm64/booting.txt). And if it isn't,
the firmware better handle the CNTPOFF_EL2 traps correctly...
What firmware did you use for this? I think we need to update the boot
wrapper, but that's something that can be done in parallel.
Thanks,
M.
--
Without deviation from the norm, progress is not possible.
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
