On Mon, 10 May 2021 09:29:47 +0100,
Auger Eric <eric.auger@xxxxxxxxxx> wrote:
>
> Hi Marc,
>
> On 5/10/21 9:49 AM, Marc Zyngier wrote:
> > Hi Eric,
> >
> > On Sun, 09 May 2021 18:00:04 +0100,
> > Auger Eric <eric.auger@xxxxxxxxxx> wrote:
> >>
> >> Hi,
> >> On 5/7/21 1:02 PM, Marc Zyngier wrote:
> >>> On Fri, 07 May 2021 10:58:23 +0100,
> >>> Shaokun Zhang <zhangshaokun@xxxxxxxxxxxxx> wrote:
> >>>>
> >>>> Hi Marc,
> >>>>
> >>>> Thanks for your quick reply.
> >>>>
> >>>> On 2021/5/7 17:03, Marc Zyngier wrote:
> >>>>> On Fri, 07 May 2021 06:57:04 +0100,
> >>>>> Shaokun Zhang <zhangshaokun@xxxxxxxxxxxxx> wrote:
> >>>>>>
> >>>>>> [This letter comes from Nianyao Tang]
> >>>>>>
> >>>>>> Hi,
> >>>>>>
> >>>>>> Using GICv4/4.1 and msi capability, guest vf driver requires 3
> >>>>>> vectors and enable msi, will lead to guest stuck.
> >>>>>
> >>>>> Stuck how?
> >>>>
> >>>> Guest serial does not response anymore and guest network shutdown.
> >>>>
> >>>>>
> >>>>>> Qemu gets number of interrupts from Multiple Message Capable field
> >>>>>> set by guest. This field is aligned to a power of 2(if a function
> >>>>>> requires 3 vectors, it initializes it to 2).
> >>>>>
> >>>>> So I guess this is a MultiMSI device with 4 vectors, right?
> >>>>>
> >>>>
> >>>> Yes, it can support maximum of 32 msi interrupts, and vf driver only use 3 msi.
> >>>>
> >>>>>> However, guest driver just sends 3 mapi-cmd to vits and 3 ite
> >>>>>> entries is recorded in host. Vfio initializes msi interrupts using
> >>>>>> the number of interrupts 4 provide by qemu. When it comes to the
> >>>>>> 4th msi without ite in vits, in irq_bypass_register_producer,
> >>>>>> producer and consumer will __connect fail, due to find_ite fail, and
> >>>>>> do not resume guest.
> >>>>>
> >>>>> Let me rephrase this to check that I understand it:
> >>>>> - The device has 4 vectors
> >>>>> - The guest only create mappings for 3 of them
> >>>>> - VFIO calls kvm_vgic_v4_set_forwarding() for each vector
> >>>>> - KVM doesn't have a mapping for the 4th vector and returns an error
> >>>>> - VFIO disable this 4th vector
> >>>>>
> >>>>> Is that correct? If yes, I don't understand why that impacts the guest
> >>>>> at all. From what I can see, vfio_msi_set_vector_signal() just prints
> >>>>> a message on the console and carries on.
> >>>>>
> >>>>
> >>>> function calls:
> >>>> --> vfio_msi_set_vector_signal
> >>>> --> irq_bypass_register_producer
> >>>> -->__connect
> >>>>
> >>>> in __connect, add_producer finally calls kvm_vgic_v4_set_forwarding
> >>>> and fails to get the 4th mapping. When add_producer fail, it does
> >>>> not call cons->start, calls kvm_arch_irq_bypass_start and then
> >>>> kvm_arm_resume_guest.
> >>>
> >>> [+Eric, who wrote the irq_bypass infrastructure.]
> >>>
> >>> Ah, so the guest is actually paused, not in a livelock situation
> >>> (which is how I interpreted "stuck").
> >>>
> >>> I think we should handle this case gracefully, as there should be no
> >>> expectation that the guest will be using this interrupt. Given that
> >>> VFIO seems to be pretty unfazed when a producer fails, I'm temped to
> >>> do the same thing and restart the guest.
> >>>
> >>> Also, __disconnect doesn't care about errors, so why should __connect
> >>> have this odd behaviour?
> >>
> >> _disconnect() does not care as we should always succeed tearing off
> >> things. del_* ops are void functions. On the opposite we can fail
> >> setting up the bypass.
> >>
> >> Effectively
> >> a979a6aa009f ("irqbypass: do not start cons/prod when failed connect")
> >> needs to be reverted.
> >>
> >> I agree the kerneldoc comments in linux/irqbypass.h may be improved to
> >> better explain the role of stop/start cbs and warn about their potential
> >> global impact.
> >
> > Yup. It also begs the question of why we have producer callbacks, as
> > nobody seems to use them.
>
> At the time this was designed, I was working on VFIO platform IRQ
> forwarding using direct EOI and they were used (and useful)
>
> + irq->producer.stop = vfio_platform_irq_bypass_stop;
> + irq->producer.start = vfio_platform_irq_bypass_start;
>
> [PATCH v4 02/13] VFIO: platform: registration of a dummy IRQ bypass producer
> [PATCH v4 07/13] VFIO: platform: add irq bypass producer management
> https://lists.cs.columbia.edu/pipermail/kvmarm/2015-November/017323.html
>
> basically the IRQ was disabled and re-enabled. This series has never
> been upstreamed but that's where it originates from.
Ah, I remember those. Something tells me we are eventually going to
need something like that with pKVM (unfortunately, PCI isn't that
popular on Android phones...).
> >> wrt the case above, "in __connect, add_producer finally calls
> >> kvm_vgic_v4_set_forwarding and fails to get the 4th mapping", shouldn't
> >> we succeed in that case?
> >
> > From a KVM perspective, we can't return a success because there is no
> > guest LPI that matches the input signal.
> right, sorry I had in mind the set_forwarding was partially successful
> for 3 of 4 LPIs but it is a unitary operation.
> >
> > And such failure seems to be expected by the VFIO code, which just
> > prints a message on the console and set the producer token to NULL. So
> > returning an error from the KVM code is useful, at least to an extent.
>
> OK. So with the revert, the use case resume working, right?
Yes, Shaokun confirmed he was back in business.
Thanks,
M.
--
Without deviation from the norm, progress is not possible.
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
