Re: [PATCH] KVM: arm64: Disable LTO in hyp

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Mar 5, 2021 at 6:22 AM Ard Biesheuvel <ardb@xxxxxxxxxx> wrote:
>
> On Fri, 5 Mar 2021 at 12:38, Marc Zyngier <maz@xxxxxxxxxx> wrote:
> >
> > On Fri, 05 Mar 2021 02:38:17 +0000,
> > Sami Tolvanen <samitolvanen@xxxxxxxxxx> wrote:
> > >
> > > On Thu, Mar 4, 2021 at 2:34 PM Sami Tolvanen <samitolvanen@xxxxxxxxxx> wrote:
> > > >
> > > > On Thu, Mar 4, 2021 at 2:17 PM Marc Zyngier <maz@xxxxxxxxxx> wrote:
> > > > >
> > > > > On Thu, 04 Mar 2021 21:25:41 +0000,
> > > > > Sami Tolvanen <samitolvanen@xxxxxxxxxx> wrote:
> >
> > [...]
> >
> > > > > > I assume hyp_panic() ends up being placed too far from __guest_enter()
> > > > > > when the kernel is large enough. Possibly something to do with LLVM
> > > > > > always splitting functions into separate sections with LTO. I'm not
> > > > > > sure why the linker cannot shuffle things around to make everyone
> > > > > > happy in this case, but I confirmed that this patch also fixes the
> > > > > > build issue for me:
> > > > > >
> > > > > > diff --git a/arch/arm64/kvm/hyp/vhe/switch.c b/arch/arm64/kvm/hyp/vhe/switch.c
> > > > > > index af8e940d0f03..128197b7c794 100644
> > > > > > --- a/arch/arm64/kvm/hyp/vhe/switch.c
> > > > > > +++ b/arch/arm64/kvm/hyp/vhe/switch.c
> > > > > > @@ -214,7 +214,7 @@ static void __hyp_call_panic(u64 spsr, u64 elr, u64 par)
> > > > > >  }
> > > > > >  NOKPROBE_SYMBOL(__hyp_call_panic);
> > > > > >
> > > > > > -void __noreturn hyp_panic(void)
> > > > > > +void __noreturn hyp_panic(void) __section(".text")
> > > > > >  {
> > > > > >         u64 spsr = read_sysreg_el2(SYS_SPSR);
> > > > > >         u64 elr = read_sysreg_el2(SYS_ELR);
> > > > > >
> > > > >
> > > > > We're getting into black-magic territory here. Why wouldn't hyp_panic
> > > > > be in the .text section already?
> > > >
> > > > It's not quite black magic. LLVM essentially flips on
> > > > -ffunction-sections with LTO and therefore, hyp_panic() will be in
> > > > .text.hyp_panic in vmlinux.o, while __guest_enter() will be in .text.
> > > > Everything ends up in .text when we link vmlinux, of course.
> > > >
> > > > $ readelf --sections vmlinux.o | grep hyp_panic
> > > >   [3936] .text.hyp_panic   PROGBITS         0000000000000000  004b56e4
> > >
> > > Note that disabling LTO here has essentially the same effect as using
> > > __section(".text"). It stops the compiler from splitting these
> > > functions into .text.* sections and makes it less likely that
> > > hyp_panic() ends up too far away from __guest_enter().
> > >
> > > If neither of these workarounds sound appealing, I suppose we could
> > > alternatively change hyp/entry.S to use adr_l for hyp_panic. Thoughts?
> >
> > That would be an actual fix instead of a workaround, as it would
> > remove existing assumptions about the relative locations of the two
> > objects. I guess you need to fix both instances with something such
> > as:
> >
> > diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S
> > index b0afad7a99c6..a43e1f7ee354 100644
> > --- a/arch/arm64/kvm/hyp/entry.S
> > +++ b/arch/arm64/kvm/hyp/entry.S
> > @@ -85,8 +85,10 @@ SYM_INNER_LABEL(__guest_exit_panic, SYM_L_GLOBAL)
> >
> >         // If the hyp context is loaded, go straight to hyp_panic
> >         get_loaded_vcpu x0, x1
> > -       cbz     x0, hyp_panic
> > -
> > +       cbnz    x0, 1f
> > +       adr_l   x0, hyp_panic
> > +       br      x0
> > +1:
>
> Agree with replacing the conditional branches that refer to external
> symbols: the compiler never emits those, for the reason we are seeing
> here, i.e., the range is simply insufficient.
>
> But let's just use 'b hyp_panic' instead, no?

Alright, this seems to work for me:

diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S
index b0afad7a99c6..c62265951467 100644
--- a/arch/arm64/kvm/hyp/entry.S
+++ b/arch/arm64/kvm/hyp/entry.S
@@ -85,8 +85,10 @@ SYM_INNER_LABEL(__guest_exit_panic, SYM_L_GLOBAL)

        // If the hyp context is loaded, go straight to hyp_panic
        get_loaded_vcpu x0, x1
-       cbz     x0, hyp_panic
+       cbnz    x0, 1f
+       b       hyp_panic

+1:
        // The hyp context is saved so make sure it is restored to allow
        // hyp_panic to run at hyp and, subsequently, panic to run in the host.
        // This makes use of __guest_exit to avoid duplication but sets the
@@ -94,7 +96,7 @@ SYM_INNER_LABEL(__guest_exit_panic, SYM_L_GLOBAL)
        // current state is saved to the guest context but it will only be
        // accurate if the guest had been completely restored.
        adr_this_cpu x0, kvm_hyp_ctxt, x1
-       adr     x1, hyp_panic
+       adr_l   x1, hyp_panic
        str     x1, [x0, #CPU_XREG_OFFSET(30)]

        get_vcpu_ptr    x1, x0

But when I say work, I mean this fixes the allmodconfig build with
LTO, and my kernel boots at EL2. I don't actually have a way to
properly test KVM on arm64. If nobody sees obvious issues here, I can
send a proper patch a bit later.

> >         // The hyp context is saved so make sure it is restored to allow
> >         // hyp_panic to run at hyp and, subsequently, panic to run in the host.
> >         // This makes use of __guest_exit to avoid duplication but sets the
> > @@ -94,7 +96,7 @@ SYM_INNER_LABEL(__guest_exit_panic, SYM_L_GLOBAL)
> >         // current state is saved to the guest context but it will only be
> >         // accurate if the guest had been completely restored.
> >         adr_this_cpu x0, kvm_hyp_ctxt, x1
> > -       adr     x1, hyp_panic
> > +       adr_l   x1, hyp_panic
> >         str     x1, [x0, #CPU_XREG_OFFSET(30)]
> >
> >         get_vcpu_ptr    x1, x0
> >
> > which is completely untested. I wouldn't be surprised if there were
> > more of these somewhere.
> >
>
> A quick grep gives me
>
> $ objdump -r vmlinux.o |grep BR19
> 000000000005b6e0 R_AARCH64_CONDBR19  hyp_panic
> 0000000000418e08 R_AARCH64_CONDBR19  __memcpy
> 0000000000418e14 R_AARCH64_CONDBR19  __memcpy

These two are in __memmove. This shouldn't be an issue, at least with LTO.

> 0000000000003818 R_AARCH64_CONDBR19  __kvm_nvhe___guest_exit_panic
> 0000000000003898 R_AARCH64_CONDBR19  __kvm_nvhe___guest_exit_panic
> 0000000000003918 R_AARCH64_CONDBR19  __kvm_nvhe___guest_exit_panic
> 0000000000003998 R_AARCH64_CONDBR19  __kvm_nvhe___guest_exit_panic
> 0000000000003a18 R_AARCH64_CONDBR19  __kvm_nvhe___guest_exit_panic
> 0000000000003a98 R_AARCH64_CONDBR19  __kvm_nvhe___guest_exit_panic
> 0000000000003b18 R_AARCH64_CONDBR19  __kvm_nvhe___guest_exit_panic
> 0000000000003b98 R_AARCH64_CONDBR19  __kvm_nvhe___guest_exit_panic
> 0000000000003c10 R_AARCH64_CONDBR19  __kvm_nvhe___host_exit
> 0000000000003c1c R_AARCH64_CONDBR19  __kvm_nvhe___host_exit
> 00000000000064f0 R_AARCH64_CONDBR19  __kvm_nvhe_hyp_panic
> 000000000000078c R_AARCH64_CONDBR19  __kvm_nvhe___kvm_handle_stub_hvc

It looks like all the nvhe code is linked together into kvm_nvhe.o, so
I don't think these will cause problems either.

Sami
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm



[Index of Archives]     [Linux KVM]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux