Hi Shameer,
On Mon, Feb 22, 2021 at 03:53:37PM +0000, Shameer Kolothum wrote:
> If the SMMU supports BTM and the device belongs to NESTED domain
> with shared pasid table, we need to use the VMID allocated by the
> KVM for the s2 configuration. Hence, request a pinned VMID from KVM.
>
> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@xxxxxxxxxx>
> ---
> drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 49 ++++++++++++++++++++-
> 1 file changed, 47 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> index 26bf7da1bcd0..04f83f7c8319 100644
> --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> @@ -28,6 +28,7 @@
> #include <linux/pci.h>
> #include <linux/pci-ats.h>
> #include <linux/platform_device.h>
> +#include <linux/kvm_host.h>
>
> #include <linux/amba/bus.h>
>
> @@ -2195,6 +2196,33 @@ static void arm_smmu_bitmap_free(unsigned long *map, int idx)
> clear_bit(idx, map);
> }
>
> +static int arm_smmu_pinned_vmid_get(struct arm_smmu_domain *smmu_domain)
> +{
> + struct arm_smmu_master *master;
> +
> + master = list_first_entry_or_null(&smmu_domain->devices,
> + struct arm_smmu_master, domain_head);
This probably needs to hold devices_lock while using master.
> + if (!master)
> + return -EINVAL;
> +
> + return kvm_pinned_vmid_get(master->dev);
> +}
> +
> +static int arm_smmu_pinned_vmid_put(struct arm_smmu_domain *smmu_domain)
> +{
> + struct arm_smmu_master *master;
> +
> + master = list_first_entry_or_null(&smmu_domain->devices,
> + struct arm_smmu_master, domain_head);
> + if (!master)
> + return -EINVAL;
> +
> + if (smmu_domain->s2_cfg.vmid)
> + return kvm_pinned_vmid_put(master->dev);
> +
> + return 0;
> +}
> +
> static void arm_smmu_domain_free(struct iommu_domain *domain)
> {
> struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
> @@ -2215,8 +2243,11 @@ static void arm_smmu_domain_free(struct iommu_domain *domain)
> mutex_unlock(&arm_smmu_asid_lock);
> }
> if (s2_cfg->set) {
> - if (s2_cfg->vmid)
> - arm_smmu_bitmap_free(smmu->vmid_map, s2_cfg->vmid);
> + if (s2_cfg->vmid) {
> + if (!(smmu->features & ARM_SMMU_FEAT_BTM) &&
> + smmu_domain->stage != ARM_SMMU_DOMAIN_NESTED)
> + arm_smmu_bitmap_free(smmu->vmid_map, s2_cfg->vmid);
> + }
> }
>
> kfree(smmu_domain);
> @@ -3199,6 +3230,17 @@ static int arm_smmu_attach_pasid_table(struct iommu_domain *domain,
> !(smmu->features & ARM_SMMU_FEAT_2_LVL_CDTAB))
> goto out;
>
> + if (smmu->features & ARM_SMMU_FEAT_BTM) {
> + ret = arm_smmu_pinned_vmid_get(smmu_domain);
> + if (ret < 0)
> + goto out;
> +
> + if (smmu_domain->s2_cfg.vmid)
> + arm_smmu_bitmap_free(smmu->vmid_map, smmu_domain->s2_cfg.vmid);
> +
> + smmu_domain->s2_cfg.vmid = (u16)ret;
That will require a TLB invalidation on the old VMID, once the STE is
rewritten.
More generally I think this pinned VMID set conflicts with that of
stage-2-only domains (which is the default state until a guest attaches a
PASID table). Say you have one guest using DOMAIN_NESTED without PASID
table, just DMA to IPA using VMID 0x8000. Now another guest attaches a
PASID table and obtains the same VMID from KVM. The stage-2 translation
might use TLB entries from the other guest, no? They'll both create
stage-2 TLB entries with {StreamWorld=NS-EL1, VMID=0x8000}
It's tempting to allocate all VMIDs through KVM instead, but that will
force a dependency on KVM to use VFIO_TYPE1_NESTING_IOMMU and might break
existing users of that extension (though I'm not sure there are any).
Instead we might need to restrict the SMMU VMID bitmap to match the
private VMID set in KVM.
Besides we probably want to restrict this feature to systems supporting
VMID16 on both SMMU and CPUs, or at least check that they are compatible.
> + }
> +
> smmu_domain->s1_cfg.cdcfg.cdtab_dma = cfg->base_ptr;
> smmu_domain->s1_cfg.s1cdmax = cfg->pasid_bits;
> smmu_domain->s1_cfg.s1fmt = cfg->vendor_data.smmuv3.s1fmt;
> @@ -3221,6 +3263,7 @@ static int arm_smmu_attach_pasid_table(struct iommu_domain *domain,
> static void arm_smmu_detach_pasid_table(struct iommu_domain *domain)
> {
> struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
> + struct arm_smmu_device *smmu = smmu_domain->smmu;
> struct arm_smmu_master *master;
> unsigned long flags;
>
> @@ -3237,6 +3280,8 @@ static void arm_smmu_detach_pasid_table(struct iommu_domain *domain)
> arm_smmu_install_ste_for_dev(master);
> spin_unlock_irqrestore(&smmu_domain->devices_lock, flags);
>
> + if (smmu->features & ARM_SMMU_FEAT_BTM)
> + arm_smmu_pinned_vmid_put(smmu_domain);
Aliasing here as well: the VMID is still live but can be reallocated by
KVM and another domain might obtain it.
Thanks,
Jean
> unlock:
> mutex_unlock(&smmu_domain->init_mutex);
> }
> --
> 2.17.1
>
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
