Using the UART devices at their legacy I/O addresses as set by IBM in
1981 was a kludge we used for simplicity on ARM platforms as well.
However this imposes problems due to their missing alignment and overlap
with the PCI I/O address space.
Now that we can switch a device easily between using ioports and MMIO,
let's move the UARTs out of the first 4K of memory on ARM platforms.
That should be transparent for well behaved guests, since the change is
naturally reflected in the device tree. Even "earlycon" keeps working,
as the stdout-path property is adjusted automatically.
People providing direct earlycon parameters via the command line need to
adjust it to: "earlycon=uart,mmio,0x1000000".
Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
---
arm/include/arm-common/kvm-arch.h | 3 +++
hw/serial.c | 45 ++++++++++++++++++++-----------
2 files changed, 32 insertions(+), 16 deletions(-)
diff --git a/arm/include/arm-common/kvm-arch.h b/arm/include/arm-common/kvm-arch.h
index b12255b0..633ea8fa 100644
--- a/arm/include/arm-common/kvm-arch.h
+++ b/arm/include/arm-common/kvm-arch.h
@@ -28,6 +28,9 @@
#define ARM_IOPORT_SIZE (1U << 16)
+#define ARM_UART_MMIO_BASE ARM_MMIO_AREA
+#define ARM_UART_MMIO_SIZE 0x10000
+
#define KVM_FLASH_MMIO_BASE (ARM_MMIO_AREA + 0x1000000)
#define KVM_FLASH_MAX_SIZE 0x1000000
diff --git a/hw/serial.c b/hw/serial.c
index 4be188a1..1854add2 100644
--- a/hw/serial.c
+++ b/hw/serial.c
@@ -13,6 +13,17 @@
#include <pthread.h>
+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
+#define serial_iobase(nr) (ARM_UART_MMIO_BASE + (nr) * 0x1000)
+#define serial_irq(nr) (32 + (nr))
+#define SERIAL8250_BUS_TYPE DEVICE_BUS_MMIO
+#else
+#define serial_iobase(nr) ((((nr) & 1) ? 0x200 : 0x300) + \
+ ((nr) >= 2 ? 0xe8 : 0xf8))
+#define serial_irq(nr) (((nr) & 1) ? 3 : 4)
+#define SERIAL8250_BUS_TYPE DEVICE_BUS_IOPORT
+#endif
+
/*
* This fakes a U6_16550A. The fifo len needs to be 64 as the kernel
* expects that for autodetection.
@@ -27,7 +38,7 @@ struct serial8250_device {
struct mutex mutex;
u8 id;
- u16 iobase;
+ u32 iobase;
u8 irq;
u8 irq_state;
int txcnt;
@@ -65,56 +76,56 @@ static struct serial8250_device devices[] = {
/* ttyS0 */
[0] = {
.dev_hdr = {
- .bus_type = DEVICE_BUS_IOPORT,
+ .bus_type = SERIAL8250_BUS_TYPE,
.data = serial8250_generate_fdt_node,
},
.mutex = MUTEX_INITIALIZER,
.id = 0,
- .iobase = 0x3f8,
- .irq = 4,
+ .iobase = serial_iobase(0),
+ .irq = serial_irq(0),
SERIAL_REGS_SETTING
},
/* ttyS1 */
[1] = {
.dev_hdr = {
- .bus_type = DEVICE_BUS_IOPORT,
+ .bus_type = SERIAL8250_BUS_TYPE,
.data = serial8250_generate_fdt_node,
},
.mutex = MUTEX_INITIALIZER,
.id = 1,
- .iobase = 0x2f8,
- .irq = 3,
+ .iobase = serial_iobase(1),
+ .irq = serial_irq(1),
SERIAL_REGS_SETTING
},
/* ttyS2 */
[2] = {
.dev_hdr = {
- .bus_type = DEVICE_BUS_IOPORT,
+ .bus_type = SERIAL8250_BUS_TYPE,
.data = serial8250_generate_fdt_node,
},
.mutex = MUTEX_INITIALIZER,
.id = 2,
- .iobase = 0x3e8,
- .irq = 4,
+ .iobase = serial_iobase(2),
+ .irq = serial_irq(2),
SERIAL_REGS_SETTING
},
/* ttyS3 */
[3] = {
.dev_hdr = {
- .bus_type = DEVICE_BUS_IOPORT,
+ .bus_type = SERIAL8250_BUS_TYPE,
.data = serial8250_generate_fdt_node,
},
.mutex = MUTEX_INITIALIZER,
.id = 3,
- .iobase = 0x2e8,
- .irq = 3,
+ .iobase = serial_iobase(3),
+ .irq = serial_irq(3),
SERIAL_REGS_SETTING
},
@@ -439,7 +450,8 @@ static int serial8250__device_init(struct kvm *kvm,
return r;
ioport__map_irq(&dev->irq);
- r = kvm__register_pio(kvm, dev->iobase, 8, serial8250_mmio, dev);
+ r = kvm__register_iotrap(kvm, dev->iobase, 8, serial8250_mmio, dev,
+ SERIAL8250_BUS_TYPE);
return r;
}
@@ -462,7 +474,7 @@ cleanup:
for (j = 0; j <= i; j++) {
struct serial8250_device *dev = &devices[j];
- kvm__deregister_pio(kvm, dev->iobase);
+ kvm__deregister_iotrap(kvm, dev->iobase, SERIAL8250_BUS_TYPE);
device__unregister(&dev->dev_hdr);
}
@@ -478,7 +490,8 @@ int serial8250__exit(struct kvm *kvm)
for (i = 0; i < ARRAY_SIZE(devices); i++) {
struct serial8250_device *dev = &devices[i];
- r = kvm__deregister_pio(kvm, dev->iobase);
+ r = kvm__deregister_iotrap(kvm, dev->iobase,
+ SERIAL8250_BUS_TYPE);
if (r < 0)
return r;
device__unregister(&dev->dev_hdr);
--
2.17.5
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
