Hi Eric, > -----Original Message----- > From: Eric Auger [mailto:eric.auger@xxxxxxxxxx] > Sent: 18 November 2020 11:22 > To: eric.auger.pro@xxxxxxxxx; eric.auger@xxxxxxxxxx; > iommu@xxxxxxxxxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; > kvm@xxxxxxxxxxxxxxx; kvmarm@xxxxxxxxxxxxxxxxxxxxx; will@xxxxxxxxxx; > joro@xxxxxxxxxx; maz@xxxxxxxxxx; robin.murphy@xxxxxxx; > alex.williamson@xxxxxxxxxx > Cc: jean-philippe@xxxxxxxxxx; zhangfei.gao@xxxxxxxxxx; > zhangfei.gao@xxxxxxxxx; vivek.gautam@xxxxxxx; Shameerali Kolothum > Thodi <shameerali.kolothum.thodi@xxxxxxxxxx>; > jacob.jun.pan@xxxxxxxxxxxxxxx; yi.l.liu@xxxxxxxxx; tn@xxxxxxxxxxxx; > nicoleotsuka@xxxxxxxxx; yuzenghui <yuzenghui@xxxxxxxxxx> > Subject: [PATCH v13 05/15] iommu/smmuv3: Get prepared for nested stage > support > > When nested stage translation is setup, both s1_cfg and > s2_cfg are set. > > We introduce a new smmu domain abort field that will be set > upon guest stage1 configuration passing. > > arm_smmu_write_strtab_ent() is modified to write both stage > fields in the STE and deal with the abort field. > > In nested mode, only stage 2 is "finalized" as the host does > not own/configure the stage 1 context descriptor; guest does. > > Signed-off-by: Eric Auger <eric.auger@xxxxxxxxxx> > > --- > v10 -> v11: > - Fix an issue reported by Shameer when switching from with vSMMU > to without vSMMU. Despite the spec does not seem to mention it > seems to be needed to reset the 2 high 64b when switching from > S1+S2 cfg to S1 only. Especially dst[3] needs to be reset (S2TTB). > On some implementations, if the S2TTB is not reset, this causes > a C_BAD_STE error > --- > drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 64 > +++++++++++++++++---- > drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 2 + > 2 files changed, 56 insertions(+), 10 deletions(-) > > diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c > b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c > index 18ac5af1b284..412ea1bafa50 100644 > --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c > +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c > @@ -1181,8 +1181,10 @@ static void arm_smmu_write_strtab_ent(struct > arm_smmu_master *master, u32 sid, > * three cases at the moment: > * > * 1. Invalid (all zero) -> bypass/fault (init) > - * 2. Bypass/fault -> translation/bypass (attach) > - * 3. Translation/bypass -> bypass/fault (detach) > + * 2. Bypass/fault -> single stage translation/bypass (attach) > + * 3. Single or nested stage Translation/bypass -> bypass/fault (detach) > + * 4. S2 -> S1 + S2 (attach_pasid_table) > + * 5. S1 + S2 -> S2 (detach_pasid_table) > * > * Given that we can't update the STE atomically and the SMMU > * doesn't read the thing in a defined order, that leaves us > @@ -1193,7 +1195,8 @@ static void arm_smmu_write_strtab_ent(struct > arm_smmu_master *master, u32 sid, > * 3. Update Config, sync > */ > u64 val = le64_to_cpu(dst[0]); > - bool ste_live = false; > + bool s1_live = false, s2_live = false, ste_live; > + bool abort, nested = false, translate = false; > struct arm_smmu_device *smmu = NULL; > struct arm_smmu_s1_cfg *s1_cfg; > struct arm_smmu_s2_cfg *s2_cfg; > @@ -1233,6 +1236,8 @@ static void arm_smmu_write_strtab_ent(struct > arm_smmu_master *master, u32 sid, > default: > break; > } > + nested = s1_cfg->set && s2_cfg->set; This is a problem when the Guest is booted with iommu.passthrough = 1 as we set s1_cfg.set = false for IOMMU_PASID_CONFIG_BYPASS. Results in BUG_ON(ste_live && !nested). Can we instead have nested = true set a bit above in the code, where we set s2_cfg->set = true for the ARM_SMMU_DOMAIN_NESTED case? Please take a look. Thanks, Shameer > + translate = s1_cfg->set || s2_cfg->set; > } > > if (val & STRTAB_STE_0_V) { > @@ -1240,23 +1245,36 @@ static void arm_smmu_write_strtab_ent(struct > arm_smmu_master *master, u32 sid, > case STRTAB_STE_0_CFG_BYPASS: > break; > case STRTAB_STE_0_CFG_S1_TRANS: > + s1_live = true; > + break; > case STRTAB_STE_0_CFG_S2_TRANS: > - ste_live = true; > + s2_live = true; > + break; > + case STRTAB_STE_0_CFG_NESTED: > + s1_live = true; > + s2_live = true; > break; > case STRTAB_STE_0_CFG_ABORT: > - BUG_ON(!disable_bypass); > break; > default: > BUG(); /* STE corruption */ > } > } > > + ste_live = s1_live || s2_live; > + > /* Nuke the existing STE_0 value, as we're going to rewrite it */ > val = STRTAB_STE_0_V; > > /* Bypass/fault */ > - if (!smmu_domain || !(s1_cfg->set || s2_cfg->set)) { > - if (!smmu_domain && disable_bypass) > + > + if (!smmu_domain) > + abort = disable_bypass; > + else > + abort = smmu_domain->abort; > + > + if (abort || !translate) { > + if (abort) > val |= FIELD_PREP(STRTAB_STE_0_CFG, > STRTAB_STE_0_CFG_ABORT); > else > val |= FIELD_PREP(STRTAB_STE_0_CFG, > STRTAB_STE_0_CFG_BYPASS); > @@ -1274,8 +1292,16 @@ static void arm_smmu_write_strtab_ent(struct > arm_smmu_master *master, u32 sid, > return; > } > > + BUG_ON(ste_live && !nested); > + > + if (ste_live) { > + /* First invalidate the live STE */ > + dst[0] = cpu_to_le64(STRTAB_STE_0_CFG_ABORT); > + arm_smmu_sync_ste_for_sid(smmu, sid); > + } > + > if (s1_cfg->set) { > - BUG_ON(ste_live); > + BUG_ON(s1_live); > dst[1] = cpu_to_le64( > FIELD_PREP(STRTAB_STE_1_S1DSS, > STRTAB_STE_1_S1DSS_SSID0) | > FIELD_PREP(STRTAB_STE_1_S1CIR, > STRTAB_STE_1_S1C_CACHE_WBRA) | > @@ -1294,7 +1320,14 @@ static void arm_smmu_write_strtab_ent(struct > arm_smmu_master *master, u32 sid, > } > > if (s2_cfg->set) { > - BUG_ON(ste_live); > + u64 vttbr = s2_cfg->vttbr & STRTAB_STE_3_S2TTB_MASK; > + > + if (s2_live) { > + u64 s2ttb = le64_to_cpu(dst[3] & STRTAB_STE_3_S2TTB_MASK); > + > + BUG_ON(s2ttb != vttbr); > + } > + > dst[2] = cpu_to_le64( > FIELD_PREP(STRTAB_STE_2_S2VMID, s2_cfg->vmid) | > FIELD_PREP(STRTAB_STE_2_VTCR, s2_cfg->vtcr) | > @@ -1304,9 +1337,12 @@ static void arm_smmu_write_strtab_ent(struct > arm_smmu_master *master, u32 sid, > STRTAB_STE_2_S2PTW | STRTAB_STE_2_S2AA64 | > STRTAB_STE_2_S2R); > > - dst[3] = cpu_to_le64(s2_cfg->vttbr & STRTAB_STE_3_S2TTB_MASK); > + dst[3] = cpu_to_le64(vttbr); > > val |= FIELD_PREP(STRTAB_STE_0_CFG, > STRTAB_STE_0_CFG_S2_TRANS); > + } else { > + dst[2] = 0; > + dst[3] = 0; > } > > if (master->ats_enabled) > @@ -1982,6 +2018,14 @@ static int arm_smmu_domain_finalise(struct > iommu_domain *domain, > return 0; > } > > + if (smmu_domain->stage == ARM_SMMU_DOMAIN_NESTED && > + (!(smmu->features & ARM_SMMU_FEAT_TRANS_S1) || > + !(smmu->features & ARM_SMMU_FEAT_TRANS_S2))) { > + dev_info(smmu_domain->smmu->dev, > + "does not implement two stages\n"); > + return -EINVAL; > + } > + > /* Restrict the stage to what we can actually support */ > if (!(smmu->features & ARM_SMMU_FEAT_TRANS_S1)) > smmu_domain->stage = ARM_SMMU_DOMAIN_S2; > diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h > b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h > index 07f59252dd21..269779dee8d1 100644 > --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h > +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h > @@ -206,6 +206,7 @@ > #define STRTAB_STE_0_CFG_BYPASS 4 > #define STRTAB_STE_0_CFG_S1_TRANS 5 > #define STRTAB_STE_0_CFG_S2_TRANS 6 > +#define STRTAB_STE_0_CFG_NESTED 7 > > #define STRTAB_STE_0_S1FMT GENMASK_ULL(5, 4) > #define STRTAB_STE_0_S1FMT_LINEAR 0 > @@ -682,6 +683,7 @@ struct arm_smmu_domain { > enum arm_smmu_domain_stage stage; > struct arm_smmu_s1_cfg s1_cfg; > struct arm_smmu_s2_cfg s2_cfg; > + bool abort; > > struct iommu_domain domain; > > -- > 2.21.3 _______________________________________________ kvmarm mailing list kvmarm@xxxxxxxxxxxxxxxxxxxxx https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
