For a pure VirtIO guest bringing in all the PCI quirk handling adds a significant amount of bloat to kernel we don't need. Solve this by adding a CONFIG symbol for the ThunderX PCI devices and allowing it to be turned off. Saving over 300k from the uncompressed vmlinux: -rwxr-xr-x 1 alex alex 85652472 Aug 3 16:48 vmlinux* -rwxr-xr-x 1 alex alex 86033880 Aug 3 16:39 vmlinux.orig* Signed-off-by: Alex Bennée <alex.bennee@xxxxxxxxxx> Cc: Robert Richter <rrichter@xxxxxxxxxxx> Cc: linux-pci@xxxxxxxxxxxxxxx Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx --- arch/arm64/Kconfig.platforms | 2 ++ arch/arm64/configs/defconfig | 1 + drivers/pci/controller/Kconfig | 7 +++++++ drivers/pci/controller/Makefile | 4 ++-- 4 files changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 8dd05b2a925c..a328eebdaa59 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -253,12 +253,14 @@ config ARCH_SPRD config ARCH_THUNDER bool "Cavium Inc. Thunder SoC Family" + select PCI_THUNDER help This enables support for Cavium's Thunder Family of SoCs. config ARCH_THUNDER2 bool "Cavium ThunderX2 Server Processors" select GPIOLIB + select PCI_THUNDER help This enables support for Cavium's ThunderX2 CN99XX family of server processors. diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 2ca7ba69c318..d840cba99941 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -199,6 +199,7 @@ CONFIG_PCI_HOST_GENERIC=y CONFIG_PCI_XGENE=y CONFIG_PCIE_ALTERA=y CONFIG_PCIE_ALTERA_MSI=y +CONFIG_PCI_THUNDER=y CONFIG_PCI_HOST_THUNDER_PEM=y CONFIG_PCI_HOST_THUNDER_ECAM=y CONFIG_PCIE_ROCKCHIP_HOST=m diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index adddf21fa381..28335ffa5d48 100644 --- a/drivers/pci/controller/Kconfig +++ b/drivers/pci/controller/Kconfig @@ -286,6 +286,13 @@ config PCI_LOONGSON Say Y here if you want to enable PCI controller support on Loongson systems. +config PCI_THUNDER + bool "Thunder X PCIE controllers" + depends on ARM64 + select PCI_QUIRKS + help + Say Y here to enable ThunderX ECAM and PEM PCI controllers. + source "drivers/pci/controller/dwc/Kconfig" source "drivers/pci/controller/mobiveil/Kconfig" source "drivers/pci/controller/cadence/Kconfig" diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile index efd9733ead26..8fad4781a5d3 100644 --- a/drivers/pci/controller/Makefile +++ b/drivers/pci/controller/Makefile @@ -45,8 +45,8 @@ obj-y += mobiveil/ # ARM64 and use internal ifdefs to only build the pieces we need # depending on whether ACPI, the DT driver, or both are enabled. +obj-$(CONFIG_PCI_THUNDER) += pci-thunder-ecam.o +obj-$(CONFIG_PCI_THUNDER) += pci-thunder-pem.o ifdef CONFIG_PCI -obj-$(CONFIG_ARM64) += pci-thunder-ecam.o -obj-$(CONFIG_ARM64) += pci-thunder-pem.o obj-$(CONFIG_ARM64) += pci-xgene.o endif -- 2.20.1 _______________________________________________ kvmarm mailing list kvmarm@xxxxxxxxxxxxxxxxxxxxx https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
