On Thu, Jan 30, 2020 at 12:25:10PM +0100, Eric Auger wrote:
> Test overflows for MEM_ACCESS and SW_INCR events. Also tests
> overflows with 64-bit events.
>
> Signed-off-by: Eric Auger <eric.auger@xxxxxxxxxx>
>
> ---
>
> v1 -> v2:
> - inline setup_irq() code
> ---
> arm/pmu.c | 137 ++++++++++++++++++++++++++++++++++++++++++++++
> arm/unittests.cfg | 6 ++
> 2 files changed, 143 insertions(+)
>
> diff --git a/arm/pmu.c b/arm/pmu.c
> index fa77ab3..ada28a4 100644
> --- a/arm/pmu.c
> +++ b/arm/pmu.c
> @@ -45,6 +45,11 @@ struct pmu {
> uint32_t pmcr_ro;
> };
>
> +struct pmu_stats {
> + unsigned long bitmap;
> + uint32_t interrupts[32];
> +};
> +
> static struct pmu pmu;
>
> #if defined(__arm__)
> @@ -116,6 +121,7 @@ static void test_mem_access(void) {}
> static void test_chained_counters(void) {}
> static void test_chained_sw_incr(void) {}
> static void test_chain_promotion(void) {}
> +static void test_overflow_interrupt(void) {}
>
> #elif defined(__aarch64__)
> #define ID_AA64DFR0_PERFMON_SHIFT 8
> @@ -261,6 +267,44 @@ asm volatile(
> : "x9", "x10", "cc");
> }
>
> +static struct pmu_stats pmu_stats;
> +
> +static void irq_handler(struct pt_regs *regs)
> +{
> + uint32_t irqstat, irqnr;
> +
> + irqstat = gic_read_iar();
> + irqnr = gic_iar_irqnr(irqstat);
> + gic_write_eoir(irqstat);
Should we clear the overflows before EOIRing? Otherwise I think it may be
possible for another interrupt to be delivered. See
https://patchwork.kernel.org/patch/11368853/
for a similar issue.
> +
> + if (irqnr == 23) {
Why 23? And how about a define?
> + unsigned long overflows = read_sysreg(pmovsclr_el0);
> + int i;
> +
> + report_info("--> PMU overflow interrupt %d (counter bitmask 0x%lx)",
> + irqnr, overflows);
> + for (i = 0; i < 32; i++) {
> + if (test_and_clear_bit(i, &overflows)) {
> + pmu_stats.interrupts[i]++;
> + pmu_stats.bitmap |= 1 << i;
> + }
> + }
> + write_sysreg(0xFFFFFFFF, pmovsclr_el0);
> + } else {
> + report_info("Unexpected interrupt: %d\n", irqnr);
We should probably avoid calling any print functions from interrupt
handlers. I see the timer test irq handler has this too, though. Also
the pl031 test has a bunch of reporting in its irq handler. We do
better with the gic tests where we only write results to arrays and
then report later.
> + }
> +}
> +
> +static void pmu_reset_stats(void)
> +{
> + int i;
> +
> + for (i = 0; i < 32; i++)
> + pmu_stats.interrupts[i] = 0;
> +
> + pmu_stats.bitmap = 0;
> +}
> +
> static void pmu_reset(void)
> {
> /* reset all counters, counting disabled at PMCR level*/
> @@ -271,6 +315,7 @@ static void pmu_reset(void)
> write_sysreg(0xFFFFFFFF, pmovsclr_el0);
> /* disable overflow interrupts on all counters */
> write_sysreg(0xFFFFFFFF, pmintenclr_el1);
> + pmu_reset_stats();
> isb();
> }
>
> @@ -713,6 +758,95 @@ static void test_chain_promotion(void)
> read_sysreg(pmovsclr_el0));
> }
>
> +static bool expect_interrupts(uint32_t bitmap)
> +{
> + int i;
> +
> + if (pmu_stats.bitmap ^ bitmap)
> + return false;
> +
> + for (i = 0; i < 32; i++) {
> + if (test_and_clear_bit(i, &pmu_stats.bitmap))
> + if (pmu_stats.interrupts[i] != 1)
> + return false;
> + }
> + return true;
> +}
> +
> +static void test_overflow_interrupt(void)
> +{
> + uint32_t events[] = { 0x13 /* MEM_ACCESS */, 0x00 /* SW_INCR */};
> + void *addr = malloc(PAGE_SIZE);
> + int i;
> +
> + if (!satisfy_prerequisites(events, ARRAY_SIZE(events)))
> + return;
> +
> + gic_enable_defaults();
> + install_irq_handler(EL1H_IRQ, irq_handler);
> + local_irq_enable();
> + gic_enable_irq(23);
> +
> + pmu_reset();
> +
> + write_regn(pmevtyper, 0, events[0] | PMEVTYPER_EXCLUDE_EL0);
> + write_regn(pmevtyper, 1, events[1] | PMEVTYPER_EXCLUDE_EL0);
> + write_sysreg_s(0x3, PMCNTENSET_EL0);
> + write_regn(pmevcntr, 0, 0xFFFFFFF0);
> + write_regn(pmevcntr, 1, 0xFFFFFFF0);
> + isb();
> +
> + /* interrupts are disabled */
> +
> + mem_access_loop(addr, 200, pmu.pmcr_ro | PMU_PMCR_E);
> + report(expect_interrupts(0), "no overflow interrupt received");
> +
> + set_pmcr(pmu.pmcr_ro | PMU_PMCR_E);
> + for (i = 0; i < 100; i++)
> + write_sysreg(0x2, pmswinc_el0);
> +
> + set_pmcr(pmu.pmcr_ro);
> + report(expect_interrupts(0), "no overflow interrupt received");
> +
> + /* enable interrupts */
> +
> + pmu_reset_stats();
> +
> + write_regn(pmevcntr, 0, 0xFFFFFFF0);
> + write_regn(pmevcntr, 1, 0xFFFFFFF0);
> + write_sysreg(0xFFFFFFFF, pmintenset_el1);
> + isb();
> +
> + mem_access_loop(addr, 200, pmu.pmcr_ro | PMU_PMCR_E);
> + for (i = 0; i < 100; i++)
> + write_sysreg(0x3, pmswinc_el0);
> +
> + mem_access_loop(addr, 200, pmu.pmcr_ro);
> + report_info("overflow=0x%lx", read_sysreg(pmovsclr_el0));
> + report(expect_interrupts(0x3),
> + "overflow interrupts expected on #0 and #1");
> +
> + /* promote to 64-b */
> +
> + pmu_reset_stats();
> +
> + events[1] = 0x1E /* CHAIN */;
> + write_regn(pmevtyper, 1, events[1] | PMEVTYPER_EXCLUDE_EL0);
> + write_regn(pmevcntr, 0, 0xFFFFFFF0);
> + isb();
> + mem_access_loop(addr, 200, pmu.pmcr_ro | PMU_PMCR_E);
> + report(expect_interrupts(0),
> + "no overflow interrupt expected on 32b boundary");
> +
> + /* overflow on odd counter */
> + pmu_reset_stats();
> + write_regn(pmevcntr, 0, 0xFFFFFFF0);
> + write_regn(pmevcntr, 1, 0xFFFFFFFF);
> + isb();
> + mem_access_loop(addr, 400, pmu.pmcr_ro | PMU_PMCR_E);
> + report(expect_interrupts(0x2),
> + "expect overflow interrupt on odd counter");
> +}
> #endif
>
> /*
> @@ -921,6 +1055,9 @@ int main(int argc, char *argv[])
> } else if (strcmp(argv[1], "chain-promotion") == 0) {
> report_prefix_push(argv[1]);
> test_chain_promotion();
> + } else if (strcmp(argv[1], "overflow-interrupt") == 0) {
> + report_prefix_push(argv[1]);
> + test_overflow_interrupt();
> } else {
> report_abort("Unknown sub-test '%s'", argv[1]);
> }
> diff --git a/arm/unittests.cfg b/arm/unittests.cfg
> index eb6e87e..1d1bc27 100644
> --- a/arm/unittests.cfg
> +++ b/arm/unittests.cfg
> @@ -108,6 +108,12 @@ groups = pmu
> arch = arm64
> extra_params = -append 'chain-promotion'
>
> +[overflow-interrupt]
Need "pmu-" prefix on this name, like the others, otherwise its standalone
test won't have an appropriate name.
> +file = pmu.flat
> +groups = pmu
> +arch = arm64
> +extra_params = -append 'overflow-interrupt'
> +
> # Test PMU support (TCG) with -icount IPC=1
> #[pmu-tcg-icount-1]
> #file = pmu.flat
> --
> 2.20.1
>
>
also same comments as previous patches
Thanks,
drew
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
