Re: [kvm-unit-tests PATCH v2 7/9] arm: pmu: test 32-bit <-> 64-bit transitions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 30, 2020 at 12:25:08PM +0100, Eric Auger wrote:
> Test configurations where we transit from 32b to 64b
> counters and conversely. Also tests configuration where
> chain counters are configured but only one counter is
> enabled.
> 
> Signed-off-by: Eric Auger <eric.auger@xxxxxxxxxx>
> ---
>  arm/pmu.c         | 136 ++++++++++++++++++++++++++++++++++++++++++++++
>  arm/unittests.cfg |   6 ++
>  2 files changed, 142 insertions(+)
> 
> diff --git a/arm/pmu.c b/arm/pmu.c
> index 538fbeb..fa77ab3 100644
> --- a/arm/pmu.c
> +++ b/arm/pmu.c
> @@ -115,6 +115,7 @@ static void test_basic_event_count(void) {}
>  static void test_mem_access(void) {}
>  static void test_chained_counters(void) {}
>  static void test_chained_sw_incr(void) {}
> +static void test_chain_promotion(void) {}
>  
>  #elif defined(__aarch64__)
>  #define ID_AA64DFR0_PERFMON_SHIFT 8
> @@ -580,6 +581,138 @@ static void test_chained_sw_incr(void)
>  		    read_regn(pmevcntr, 0), read_regn(pmevcntr, 1));
>  }
>  
> +static void test_chain_promotion(void)
> +{
> +	uint32_t events[] = { 0x13 /* MEM_ACCESS */, 0x1E /* CHAIN */};
> +	void *addr = malloc(PAGE_SIZE);
> +
> +	if (!satisfy_prerequisites(events, ARRAY_SIZE(events)))
> +		return;
> +
> +	/* Only enable CHAIN counter */
> +	pmu_reset();
> +	write_regn(pmevtyper, 0, events[0] | PMEVTYPER_EXCLUDE_EL0);
> +	write_regn(pmevtyper, 1, events[1] | PMEVTYPER_EXCLUDE_EL0);
> +	write_sysreg_s(0x2, PMCNTENSET_EL0);
> +	isb();
> +
> +	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
> +	report(!read_regn(pmevcntr, 0),
> +		"chain counter not counting if even counter is disabled");
> +
> +	/* Only enable even counter */
> +	pmu_reset();
> +	write_regn(pmevcntr, 0, 0xFFFFFFF0);
> +	write_sysreg_s(0x1, PMCNTENSET_EL0);
> +	isb();
> +
> +	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
> +	report(!read_regn(pmevcntr, 1) && (read_sysreg(pmovsclr_el0) == 0x1),
> +		"odd counter did not increment on overflow if disabled");
> +	report_info("MEM_ACCESS counter #0 has value %ld",
> +		    read_regn(pmevcntr, 0));
> +	report_info("CHAIN counter #1 has value %ld",
> +		    read_regn(pmevcntr, 1));
> +	report_info("overflow counter %ld", read_sysreg(pmovsclr_el0));
> +
> +	/* start at 0xFFFFFFDC, +20 with CHAIN enabled, +20 with CHAIN disabled */
> +	pmu_reset();
> +	write_sysreg_s(0x3, PMCNTENSET_EL0);
> +	write_regn(pmevcntr, 0, 0xFFFFFFDC);
> +	isb();
> +
> +	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
> +	report_info("MEM_ACCESS counter #0 has value 0x%lx",
> +		    read_regn(pmevcntr, 0));
> +
> +	/* disable the CHAIN event */
> +	write_sysreg_s(0x2, PMCNTENCLR_EL0);
> +	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
> +	report_info("MEM_ACCESS counter #0 has value 0x%lx",
> +		    read_regn(pmevcntr, 0));
> +	report(read_sysreg(pmovsclr_el0) == 0x1,
> +		"should have triggered an overflow on #0");
> +	report(!read_regn(pmevcntr, 1),
> +		"CHAIN counter #1 shouldn't have incremented");
> +
> +	/* start at 0xFFFFFFDC, +20 with CHAIN disabled, +20 with CHAIN enabled */
> +
> +	pmu_reset();
> +	write_sysreg_s(0x1, PMCNTENSET_EL0);
> +	write_regn(pmevcntr, 0, 0xFFFFFFDC);
> +	isb();
> +	report_info("counter #0 = 0x%lx, counter #1 = 0x%lx overflow=0x%lx",
> +		    read_regn(pmevcntr, 0), read_regn(pmevcntr, 1),
> +		    read_sysreg(pmovsclr_el0));
> +
> +	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
> +	report_info("MEM_ACCESS counter #0 has value 0x%lx",
> +		    read_regn(pmevcntr, 0));
> +
> +	/* enable the CHAIN event */
> +	write_sysreg_s(0x3, PMCNTENSET_EL0);
> +	isb();
> +	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
> +	report_info("MEM_ACCESS counter #0 has value 0x%lx",
> +		    read_regn(pmevcntr, 0));
> +
> +	report((read_regn(pmevcntr, 1) == 1) && !read_sysreg(pmovsclr_el0),
> +		"CHAIN counter #1 should have incremented and no overflow expected");
> +
> +	report_info("CHAIN counter #1 = 0x%lx, overflow=0x%lx",
> +		read_regn(pmevcntr, 1), read_sysreg(pmovsclr_el0));
> +
> +	/* start as MEM_ACCESS/CPU_CYCLES and move to CHAIN/MEM_ACCESS */
> +	pmu_reset();
> +	write_regn(pmevtyper, 0, 0x13 /* MEM_ACCESS */ | PMEVTYPER_EXCLUDE_EL0);
> +	write_regn(pmevtyper, 1, 0x11 /* CPU_CYCLES */ | PMEVTYPER_EXCLUDE_EL0);
> +	write_sysreg_s(0x3, PMCNTENSET_EL0);
> +	write_regn(pmevcntr, 0, 0xFFFFFFDC);
> +	isb();
> +
> +	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
> +	report_info("MEM_ACCESS counter #0 has value 0x%lx",
> +		    read_regn(pmevcntr, 0));
> +
> +	/* 0 becomes CHAINED */
> +	write_sysreg_s(0x0, PMCNTENSET_EL0);
> +	write_regn(pmevtyper, 1, 0x1E /* CHAIN */ | PMEVTYPER_EXCLUDE_EL0);
> +	write_sysreg_s(0x3, PMCNTENSET_EL0);
> +	write_regn(pmevcntr, 1, 0x0);
> +
> +	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
> +	report_info("MEM_ACCESS counter #0 has value 0x%lx",
> +		    read_regn(pmevcntr, 0));
> +
> +	report((read_regn(pmevcntr, 1) == 1) && !read_sysreg(pmovsclr_el0),
> +		"CHAIN counter #1 should have incremented and no overflow expected");
> +
> +	report_info("CHAIN counter #1 = 0x%lx, overflow=0x%lx",
> +		read_regn(pmevcntr, 1), read_sysreg(pmovsclr_el0));
> +
> +	/* start as CHAIN/MEM_ACCESS and move to MEM_ACCESS/CPU_CYCLES */
> +	pmu_reset();
> +	write_regn(pmevtyper, 0, 0x13 /* MEM_ACCESS */ | PMEVTYPER_EXCLUDE_EL0);
> +	write_regn(pmevtyper, 1, 0x1E /* CHAIN */ | PMEVTYPER_EXCLUDE_EL0);
> +	write_regn(pmevcntr, 0, 0xFFFFFFDC);
> +	write_sysreg_s(0x3, PMCNTENSET_EL0);
> +
> +	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
> +	report_info("counter #0=0x%lx, counter #1=0x%lx",
> +			read_regn(pmevcntr, 0), read_regn(pmevcntr, 1));
> +
> +	write_sysreg_s(0x0, PMCNTENSET_EL0);
> +	write_regn(pmevtyper, 1, 0x11 /* CPU_CYCLES */ | PMEVTYPER_EXCLUDE_EL0);
> +	write_sysreg_s(0x3, PMCNTENSET_EL0);
> +
> +	mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
> +	report(read_sysreg(pmovsclr_el0) == 1,
> +		"overflow is expected on counter 0");
> +	report_info("counter #0=0x%lx, counter #1=0x%lx overflow=0x%lx",
> +			read_regn(pmevcntr, 0), read_regn(pmevcntr, 1),
> +			read_sysreg(pmovsclr_el0));
> +}
> +
>  #endif
>  
>  /*
> @@ -785,6 +918,9 @@ int main(int argc, char *argv[])
>  	} else if (strcmp(argv[1], "chained-sw-incr") == 0) {
>  		report_prefix_push(argv[1]);
>  		test_chained_sw_incr();
> +	} else if (strcmp(argv[1], "chain-promotion") == 0) {
> +		report_prefix_push(argv[1]);
> +		test_chain_promotion();
>  	} else {
>  		report_abort("Unknown sub-test '%s'", argv[1]);
>  	}
> diff --git a/arm/unittests.cfg b/arm/unittests.cfg
> index 1bd4319..eb6e87e 100644
> --- a/arm/unittests.cfg
> +++ b/arm/unittests.cfg
> @@ -102,6 +102,12 @@ groups = pmu
>  arch = arm64
>  extra_params = -append 'chained-sw-incr'
>  
> +[pmu-chain-promotion]
> +file = pmu.flat
> +groups = pmu
> +arch = arm64
> +extra_params = -append 'chain-promotion'
> +
>  # Test PMU support (TCG) with -icount IPC=1
>  #[pmu-tcg-icount-1]
>  #file = pmu.flat
> -- 
> 2.20.1
> 
> 

same comments as previous patches

Thanks,
drew

_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm



[Index of Archives]     [Linux KVM]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux